Simple Art International XA0801 Smart Watch User Manual
- June 8, 2024
- Simple Art International
Table of Contents
Simple Art International XA0801 Smart Watch
Please read the manual before use.
- The information in this document won’t be modified or extended in accordance with any notice.
- The watch should be charged for 2 hours at least before first time use.
Caution
Waterproof and dust-proof
Please follow below guidelines to maintain the waterproof and dust-proof
function.
Otherwise, your device might be damaged.
- *Do not use watch when diving, snorkeling or other sports in turbulent water.
- Do not use watch in extremely high or low temperature environments.
- Do not use blowers and other heated equipment to dry the watch.
- *Avoid the watch is dropped or hit
- *Avoid wearing the device in the sauna and steam room
- Do not disassemble your watch without permission.
- Please dry your hands or watch fully before operating.
- If the watch is exposed to water or other liquids (such as salt water, pool water, soapy water, oil, perfume, sunscreen, hand sanitizer) or chemicals (such as cosmetics), please clean and dry it fully with a soft cloth. Do not follow these instructions may damage its performance and appearance.
Cleaning and management
Follow the points below to ensure the watch is operating normally and looks good. Otherwise, it may damage you watch and cause skin irritation.
- Protect watch from dust, sweat, ink, oil, and chemical products (such as cosmetics, antibacterial sprays, hand sanitizers, detergents, and insecticides. Otherwise, the internal and external parts may be damaged or cause performance degradation. If watch is stained with the above substances, please clean it with a lint-free soft cloth.
- When cleaning the watch, do not use soap, detergent, abrasive materials, compressed air, ultrasonic waves, or external heat sources. Otherwise, the watch may be damaged. Soap, detergent, hand sanitizer, or detergent residue may cause skin irritation.
- After exercising or sweating, please clean your wrist and strap. Use water to clean the watch and dip small amount of alcohol to wipe, then dry it thoroughly.
- If the watch is stained or infiltrated with other objects, please use a wet soft toothbrush to clean it.
Allergic person Notice
Manufacturer conducted testing about hazardous materials on watch by the internal and external certification agency, including testing of all materials contact skin, skin toxicity testing, and wearing testing.
The watch contains nickel. If your skin is very sensitive or you are allergic to the materials on the watch, please take necessary precautions.
Product specification
Product specification
Charging
Connect watch according to the picture. Activate the watch by charging before the first time use.
Operation
- Power on: Press and hold the power button for 5 seconds to turn it on. The home screen of the watch will be displayed after booting.
- Touch screen operation: From the home screen, swipe to the right to the menu screen, then tap the function icon to enter the corresponding sub-menu.
- Wake up screen: Short press the power button to wake up the screen or turn up wrist to bright the screen if this function was turned on in the APP.
- Shutdown: Click the Setting icon, click System – Shut down, click to power off. Or under the bright screen situation, press and hold the side button for 2s to choose power off.
Replace the strap
Remove the strap from the watch by sliding the quick release on the strap.
Quick Guide
Product quick into
- Power on and enter into the home page.
- Swipe to the right Display function list-> Daily activity, Games, Sports, Sport record, Heart rate, Sleep Weather, Style, Timer, Setting. Tap a function to select.
- Swipe down: Display Battery, Bluetooth, Date, Brightness, Games, Alarms, Setting.
- Swipe up: Storage information, Heart rate monitoring, Daily activity.
- Swipe to the left: Display the static icon list, click to enter the corresponding function, right stroke to return to the previous level
Clock Display
There are 5 watch face for choice and also can be Customized.
Setting method:
When the watch is in clock mode, please long press on the middle screen and
set different clock interfaces if you like.
Product quick use
Download and install App
You can set up the watch through the “Fundo Health” App for IOS or Android devices. You need to download and install the “Fundo Health” App from APP Store or Google Play Store:
Or you can scan the following QR code to download the app
Bluetooth Connection
- Turn on the Bluetooth and GPS on your mobile phone.
- Tun on your watch, in the app, search the device to bind. After connected successfully, shown as the icon in the watch status bar:
Notice:
- During the process of opening the APP or binding the watch, please agree to all the permission prompt. During binding process, “Fundo Health” will prompt you to enable GPS and Bluetooth, and authorize “Fundo Health” to get access to the GPS on you mobile phone. If your phone is IOS system, you need agree to pair with you phone and display your iPhone notifications.
- Wrong operation: Pair the watch directly with the Bluetooth in your mobile phone’s settings.
- Please don’t shut the Bluetooth notify service when you are clearing software by background or close background application software. It will affect the sync function between watch and phone if shut it. If you want your watch to receive third -party notifications, you need to turn on the notification permissions.
Basic functions
Daily activity
The watch will display the user’s total number of steps, distance and calories consumption and the | data will be cleared at 00 00 o’clock (midnight) every day.
Sports
In sports mode: the single point function icon allows you to enter sports
modes such as Walking, Running, Climbing, Riding, Basketball, and Football.
In sports mode: the single point function icon allows you to enter sports modes such as Walking, Running, Climbing, Riding, Basketball, and Football.
Sports record
If you have done any sports and saved, this function will show the information
of sports records.
Heart rate
EARY HA Touch the heart rate icon to start the measurement, the value will be
appeared after 20-30 seconds.
Games
There are five interesting games on the watch, including
- Puzzle
- Flying Bird
- Plane War
- Card Match
- Basketball
- you can choose one to play.
Sleep
It will record your sleep duration and quality automatically from 21:00 p.m to
9:00 a.m. This function require to wear the watch to sleep.
Weather
After connected with Fundo Health, the watch will show local weather and the
updated time.
Style
The Ul include Layout style and icon style, you can choose a different style
to show.
Timer
Swipe left on the main page and click the stop icon static icon to switch to
the stopwatch interface. Click to start timing. During the timing, you can
pause/start switching with a single touch. wipe the stopwatch function to the
right of the stopwatch interface and return to the static function page.
Setting
Screen display: Including change dial, Brightness, Screen time, Turn wrist
wake setting. Do not disturb: Set enter or exit do not disturb mode.
Vibration: Set vibration intensity. Alarms: You can set alarms in the watch,
the watch will show the alarms information, and you can also add the habit
tracker table, when the alarm time is up, the watch will pop up a reminder
icon. You can also open or close it in the watch. System: Including: System
version, Shut down, Reset settings.
Warning
Please follow the doctor’s instructions and measure the results of self-
diagnosis and treatment. Users with blood circulation disorders and blood
diseases should be treated under the guidance of a doctor. The measurement
results of this product are for reference only and are not intended for any
medical use or basis.
This device contains license-exempt transmitter(s) receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>