danalock V3 Smart Door Lock User Guide
- June 9, 2024
- danalock
Table of Contents
Danalock V3
Basic app guide
V3 Smart Door Lock
The Danalock app
The Danalock app is used as main control for all Danalock products*.
Go to App Store or Google Play to download the app.
| App Store | Google Play |
|---|---|
| https://itunes.apple.com/dk/app/danalock/id768685462 |
https://play.google.com/store/apps/details?id=dk.polycontrol.ekey
*The Danalock V3 HomeKit smart lock and its features is controlled by Apple’s HomeKit app.
Create a user
When you open the app for the first time, you will be asked to either log in or sign up.
The keychain
The keychain is where you find the locks you have access to. If you have more
than one device added to your account you’ll be able to select by swiping left
and right. Use the lock buttons to lock (red button) or unlock (green button)
the device.
To start using the Danalock App you need to add at least one Danalock device
to your keychain.
Add a Danalock V3 to your keychain
To add a Danalock V3 to your keychain press ADD NEW DEVICE.
Your phone now scans the area for available devices and presents a list for
you to choose from. The icons indicate the type of device found:
Press the device you want to install. The app will connect and add the
Danalock device to your keychain.
Calibrate your lock
If the device you have added is a Danalock V3, you need to calibrate it. You
can calibrate it either manually or automatically.
Navigate to the keychain and make sure that the lock you want to calibrate is
selected in the keychain.
Press DEVICE and select CALIBRATION in the settings list.
Choose between MANUAL CALIBRATION and AUTOMATIC CALIBRATION. Manual
calibration will give you a more nuanced control over the distance your
Danalock V3 travels between locked and unlocked position.
Automatic calibration
Make sure that the Danalock V3 is mounted correctly. Leave thedoor open and
lift the handle if necessary. Turn your Danalock V3 to unlocked position and
press the calibration button. The Danalock V3 will light up white while
calibrating.
When the calibration has been completed your lock is ready to use. In the
settings tab you can see a list of configurations of other features for your
Danalock V3.
Manual calibration
Turn the Danalock V3 to unlocked position and press the green button. Then
turn the Danalock V3 to locked position and press the red button. You can
press the blue button to test your calibration.
When the calibration has been completed your lock is ready to use. In the
settings tab you can see a list of configurations of other features for your
Danalock V3.
Invite a guest
If you have more than one Danalock V3 in the keychain navigate to the Danalock
V3 you want to invite to, and press USERS.
Press INVITE in the upper right corner to go to the invitation
screen.
Select access level
Select the type of access you want your guest to have:
Temporary guests:
Temporary guests are given access in a single time interval. With this access
type, you define the interval in which you want your guest to have
access.
Permanent guests:
Permanent guests have access at all times, but can’t invite new guests
themselves.
Set guest settings
Below the access level and time restrictions, you can turn on usage
notifications if you want to be notified when the user operates the
lock.
Send invitation
You can invite your guests in three different ways:
Invite by sharing a link
This will generate a hyperlink that you can share with the guest. Note that
the link can only be activated once and can thus only be used to invite one
guest.
Invite by email
Enter the email of the guest you want to invite. The Danalock App will take
you directly to your preferred mail application and generate the invitation.
Send the mail to invite your guest.
Invite by Danalock username
Enter the username of the guest you want to invite. Your guest will receive
the invitation directly in the Danalock App.
Manage guests
You can easily monitor and manage the guests for your Danalock devices. Navigate to the Danalock device you want to manage in the keychain and press USERS in the bottom navigation bar. Here you can see the guest list for your Danalock device along with additional details about each guest.
Guest information
On the list you can see each of your guests along with a set of icons. Each
icon gives information about what kind of access the guest has.
Change guest access
To change the access settings for one of your guests, tap the guest on the
list, make the desired changes and press SAVE.
Remove guest
To remove one of your guests from your guest list, tap the guest on the
list, make the desired changes and press save.
User and lock information
You can see a list of your guests’ email addresses as well as their chosen
displayed names by pressing USERS in the bottom navigation bar.
Guest profiles
You can see a list of your guests’ email addresses as well as their chosen
displayed names. Navigate to the Danalock device you want to manage in the
keychain and press USERS.
Lock information
Navigate to the Danalock device you want information about in the keychain
and press DEVICE. Here you can change the Lock name and see battery status.
Press DEVICE INFO to see specific information such as MAC address and product
type.
Firmware upgrade
Navigate to the Danalock device you want to update in the keychain. Go to
device settings, press LOCK INFO > FIRMWARE. The Danalock App checks installed
firmware and updates it if there is a newer one available.
It is important you keep your phone near the Danalock V3 at all times during
the firmware update.
Before updating the firmware make sure the phone is at a sufficient power
level.
Delete
Navigate to the Danalock device you want to remove in the keychain. In the
SETTINGS list of your Danalock V3 press DELETE DEVICE. The Danalock App will
remove the lock from your account.
To delete an accessory device from your account start by unpairing it from
your Danalock device. In the accessory device settings list press PAIRING >
UNPAIR DEVICE. When the accessory device has been unpaired press DELETE in the
SETTINGS list.
Reset settings
To reset the Danalock V3 settings you insert a small pin or paper clip into the hole on the side of the Danalock V3 and press ten times. When the reset request is confirmed the LED will blink red.
Visit our website for more information about Danalock products and product
guides
www.danalock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>