SKMEI 1834 Digital Watch User Manual

SKMEI 1834 Digital Watch

Features

• LCD Display, Display Hour, Minute, Second, Month, Day and Week
• Daily Alarm and Chime hourly
• 12 / 24H format select-able, fully automatic calendar
• Time of 31 cities (29 time zones)；Summer time
• 60 minutes countdown
• Stopwatch(maximum time 59.99.99)
• Dual time
• 2000-2039 Years, automatic week
• Synchronous movement
• EL backlight

Operational Manual

1. Real Time Mode

   • Press D key to switch: week → date

   • Press C key until “seconds” flash to enter the Setting Mode,press B to select the items to be set (flash) as follows: “Seconds” → “Summer time (off/on)” → “time zone” → “time” → “minute” → “12/24h” → “year” → “month” → “day” → “EL time”
     In the set item，Press D key/A key to adjust，and hold D key/A key to adjust quickly

   • While the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes .
     In the range of 00 to 29,the minutes are unchanged.

   • Press C key to return to the real time mode, and the pointer will auto-syn with the time.

2. World time Mode

   • Press D key to select time zone. Hold D key to select time zone quickly.
   • Press C key for 2 seconds to select off/on summer time, and “DST” will be displayed when on, and no “DST” display will be displayed when it is off.(Summer time cannot be set when GMT is displayed)

3. Countdown Mode

4. Maximum countdown range: 60 minutes, default countdown is 5 minutes.

5. Press D key to start / pause the countdown.When countdown is in progress, press D key to pause the countdown, and press C key to return to the original setting value when countdown stops.

6. In the countdown mode, Hold C key for 2 seconds to enter the countdown setting mode.
   Press B to select the setting item.
   Press D key/A key to adjust, and hold D key/A key to adjust quickly.
   ” ” Indicates that the initial value will be returned automatically after the countdown
   ” “Indicates automatic cycle of countdown.
   ” “（off / on) tone

7. When the countdown tone is turned on, the countdown is less than 30 seconds with a “drop” sound, and the last 10 seconds with a “drop” sound per second. This function is not available when it is turned off.

8. Press C key to exit the countdown setting mode.

9. Stopwatch Mode

   • Single record: Press D key to start timing, press D key again to stop the stopwatch, and press C key to clear the stopwatch when it stops.
   • Multiple records：Press D key to start timing, then Press C key to control stopwatch and timing. Press D key to stop when the timing continues, and finally Press C key to clear the stopwatch.

10. Alarm Mode

    • Press C key to turn on/off the alarm (ALM Display means alarm ON)

    • Press D key switches Hourly Chime (“SIG” Diplay), “AL1-AL4” (four groups of alarm rings), Snooze (“SNZ “ display):

    • Hold C key for 2 seconds then Hour will flash , enter to alarm setting mode

    • press B key to switch “hour-minute” in sequence.
      Press D / A key to adjust the data, hold D / A key to adjust quickly
      Press C key to exit the alarm setting mode.

    •  In AL1-AL4, the alarm clock can ring for 20 seconds when it reaches alarm time, it can be interrupted by pressing any key halfway.

    • When we turn on Snooze Funtion（“SNZ” display）, it will ring for 20 seconds, and then it will ring once every 5 minutes (20 seconds) until it rings seven times.if no data then means OF the Snooze function.

    • When you turn on Hourly Chime（“SIG” display）,it will ring once the time reaches, if no data then means OF the Hourly chime function.

11. Pointer adjustment Mode

    • Hold C key until the full screen flashes.
    • press D key to adjust the pointer quickly (to make the needle movement pointer time consistent with the LCD display time).
    • In the pointer setting mode, press C key to exit the setting mode.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>