AVENTO Pro Ankle and Shin Guards Instructions
- June 9, 2024
- AVENTO
Table of Contents
AVENTO Pro Ankle and Shin
HOW TO WEAR
Thanks for choosing this Avento product. You’re now one step closer to achieving your goals!
Always read all warnings and instructions carefully before use. Always follow all warnings and instructions closely. Failure to do so can put the user’s safety at risk. Always keep all product documentation for future reference. Make sure to choose the correct size and fit for the user. Your product needs to be fitted and worn correctly to ensure maximum safety and comfort.
SAFETY INSTRUCTIONS
Using protective gear can never guarantee 100% protection. Use of this product is at your own risk. This product is meant only for private use and must not be used for commercial purposes. Never alter the construction of the product or make any other modifications, this may compromise your safety! The supplier cannot be held responsible and/or liable for any damages or injuries sustained as a result of modifications made to, or misuse of, the product. Check the product for possible damage before every use. If you discover a defect or damage on the product (e.g. releasing foam, cracks or holes in the shin guard), stop using it immediately. If your product has been involved in heavy impact, its integrity may be (invisibly) impaired. We advise you therefore, in such cases, to replace the product immediately, or have it checked by an expert.
GENERAL USE
This product is suitable for normal use during sports such as soccer and hockey.
MAINTENANCE
Clean your product with a clean, damp cloth without cleaning agents. Store your product inside, in a dry area with little temperature fluctuation and never in direct sunlight. The product should always and only be air-dried & handwasher
DISCLAIMER
Schreuder’s Sport International BV is not responsible for any errors or omissions in the information included in this manual. All information in this manual is provided “as is”, with no guarantee of completeness, accuracy or timeliness.
PE 33% EVA 25% POLYESTER 30% RUBBER 12%
EN 13061:2009
SSI
PLESMANSTRAAT 4
4143 HL LEERDAM/NL
MADE IN CHINA