QuattroPod T02 Plus Portable Battery User Guide
- June 9, 2024
- QuattroPod
Table of Contents
QuattroPod T02 Plus Portable Battery
What’s in the box?
-
( QuattroPod Receiver )
-
(QuattroPod Mini Transmitter)
-
( HDMI A to A)
-
(QSG)
-
( 5V Universal Adapter )
QuattroPod Receiver
Transmitter Operation
Transmitter
Main button(Mirror button) | Host | Guest |
---|
Single click
| Mirror/Disconnect| Send mirror
request
Holdfor3seconds
| Full screen mirror| Send full screen mirror request
Side button(Control button)| Host| Guest
---|---|---
Single click
| Allow guest to mirror| –
Double click
| Deny request| –
Hold for 3 seconds
| Quit all display| –
Receiver
LED Status list
- Enable Host w/o source input.
- Enable Host and casting.
- Guest standby w/o casting.
- Guest requests casting and wait for allow.
- Enable Guest and casting.
- Transmitter OTA Completed.
- Enable Guest w/o source input.
- Host received request of cast.
- Host standby w/o casting.
- Under connection. m~cp ·
- Pairing/Transmitter OTA download and installation.
- Fail to connection(blinking for lminutes or more).
- Pairing done,
- Transmitter OTA Fail.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interierence.
- This device must accept any interference received, including interference that may cause undesired operation. .
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with ~h~ limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These l1mrts are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However; there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interierence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radioffVtechnician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body 02018 Actions Microelectronics Co., Ltd. All right reserved. Quattro Pod or Quattro are trademarks of Actions Microelectronic Co., Ltd., registered in China and other countries. Other product and company names mentioned herein may be trademarks other respective companies.
QuattroPod Transmitter
ANDROID
Please enable USB Debugging before using.
-
Go to Setting-System-About Phone
-
Click Build Number for 7 times to enable Developer Option
-
Go to Developer option-LI SB Debugging- On
-
Plug to QuattroPod Transmitter and Allow USB debug
Note: Please select MTP or File Transferring in the notifications when USB is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>