SONY VPLL-Z8014 Projection Lens Instruction Manual
- June 9, 2024
- Sony
Table of Contents
SONY VPLL-Z8014 Projection Lens
Before operating the unit, please read this manual thoroughly and retain it for future reference. When using the product, do not use it for purposes other than those described in the instruction manual.
For the customers in the U.S.A.
SONY LIMITED WARRANTY – Please visit http://www.sony.com/psa/warranty
for important information and complete terms and conditions of Sony’s limited
warranty applicable to this product. For the customers in Canada
SONY LIMITED WARRANTY – Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resources-warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product. For the customers in Europe Sony Professional Solutions Europe – Standard Warranty and Exceptions on Standard Warranty. Please visit https://pro.sony/support-services/primesupport /support-professional-solutions-europe-standard-product-warranty for important information and complete terms and conditions. For the customers in Korea
SONY LIMITED WARRANTY – Please visit http://bpeng.sony.co.kr/handler /BPAS-Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
Overview
- This lens is designed for use with the Sony Projector.
- Make sure to confirm that this lens is usable with your projector before using it by reading the Operating Instructions supplied with your projector.
On condensation
If the room temperature where the projector is installed changes rapidly, or if the projector is moved suddenly from a cold to a warm place, condensation in the projector may occur. As the condensation may cause malfunction, be careful in adjusting the temperature settings of the air conditioner. If condensation occurs, leave the projector turned on for about two hours before use. Do not place this product close to medical devices This product (including accessories) has a magnet(s) that may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
Supplied accessories
- VPLL-Z8014 Operating Instructions
- (1) Locking screw * (3)
- VPLL-Z8008 Operating Instructions
- (1) Locking ring *
- (1) Locking plate *
- (2) Locking-ring screw *
- (4) Locking-plate screw * (8)
This part prevents the zoom/focus point from blurring when the projector is used in an environment subject to vibration.
About lens attachment
Caution
Refer to the manual of the projector with which the lens is used for throw
ratio and hazard distance. If the projector becomes RG3 (Risk Group 3 as per
IEC 62471-5) by the combination, the following warnings apply.
- No direct exposure to the beam shall be permitted.
- Operators shall control access to the beam within the hazard distance or install the product at a height that will prevent eye exposure within the hazard distance.
- Attaching the lens may cause fire or injury to the person.
- Users should request a qualified Sony representative to attach the lens.
Notes
-
Lenses can be scratched easily. When handling lenses, always place them gently on a stable, level surface in a horizontal position.
-
Avoid touching the lens surface.
-
Do not place any object just in front of the lens that may block the light during projection.
If the light is blocked, heat may damage the object or the lens of the unit (resulting in deformation, etc.). -
Use the picture muting function to suspend projection for a short while.
References
- Sony Group Portal - Home
- Sony Professional - Products and Solutions To Redefine Your Business
- Change Country