baby express Spectra Wearable Electric Breast Pump User Guide

baby express Spectra Wearable Electric Breast Pump User Guide

Description of Package Contents

Please check the quantity of the content before use. If there is any missing part, please contact the seller

1. Flange Cov
2. Pump Motor
3. Charging Cable
4. Silicone Valve
5. Silicone Flange 24mm (Silicone Flange 27mm sold separately)
6. Silicon Diaphragm
7. Bra Extender
8. Collection Cup

Note : Pump motor is not water proof. Do not wash with water or have it come in contact with any liquid.

Operation Panel

• Power button / Mode change : Press and hold to on / off, short press to change mode
• Auto Mode : Starts with ‘Stimulation Mode’ level 1 to 6 then ‘Expression Mode’ level 7 to 9, with an interval of 20 seconds per level. (Level 10 to 12 needs to be manually adjusted)
• Stimulation / Expression mode : 2 essential modes for pumping
• Suction increase/reduce button : increase/reduce suction level (total 12 levels per mode)
• Suction level : Indicates the level of suction
• Battery Life : Total 3 bars, to charge once its at 1 bar level
• Timer : Indicates the pumping time in minutes

Note

• The appliance will turn off automatically after 20mins of operation
• The appliance comes with a memory mode and will start from last used mode/suction level
• Full charge takes about 2.5 hours. Avoid overcharging.
• Power adaptor excluded. Compatible with Output 5V 1A .

Assembly Sequence

1. Put the silicone valve into the collection cup.

2. Ensure that the silicone valve is aligned parallel to the collection cup and does not touch the collection cup.

3. Insert the diaphragm into the collection cup. Press it down to ensure it sits in properly.

4. Fit the silicone flange onto the collection cup and ensure it is properly sealed.

5. Sit the pump motor onto the collection cup.

Wearing the Pump

1. Put the assembled pump firmly onto your breast. Ensure that the nipple is aligned in the centre. Keep the pump upright at all times.
   Tip: Pump has a memory function. It will enter the last working mode when turned on.

2. Use the bra extender with your nursing bra to fit the pump. Ensure that the pump sits firmly on your breast.
   T i p: Use the bra extender to prevent damaging your bra by over stretching it.

Note

• Please avoid over pumping to avoid breast injuries. Please seek medical advice if breast becomes painful because of using the breast pump.
• To have a smooth milk pumping session, please set the suction level according to your personal preference.
• Please off the power before stopping use.
• All function of this product are described in the user’s guide.
• Always check the breast pumps and components for wear and damage before use. Replace if necessary.
• Breast pump parts are recommended to be washed and sterilised before and after every use.
• Do not use this product for other intentions not indicated in this guide.

Cleaning and milk storage

Before use, please clean and sterilise the accessories. After use, clean the accessories as well, and keep them dry. Please note that motor and power adapter cannot be washed or sterilised. When cleaning the silicone parts, please be gentle. If damaged, it will affect the suction.

Take apart accessories when cleaning and sterilising. Allow accessories to cool for 20 mins before assembling to avoid damage.

To pour out pumped milk, remove motor to reveal top opening and pour.
Tip: do not attempt to dismantle the pump or open the flange to pour out the milk

Note: Ensure the opening on the silicone flange is aligned on top to prevent leaking.

All of BE Nude pump parts can be steamed, boiled and UV sterilised. Unless otherwise indicated. Pump motor, especially the bottom, should be wiped with damp cloth regularly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>