Trust GXT IDON PC Laptop RGB Gaming Mouse User Manual
- June 2, 2024
- Trust
Table of Contents
- GXT IDON PC Laptop RGB Gaming Mouse
- Mouse Button layout
- Installation
- Assign a function
- DPI setting
- Change the Lighting
- Mouse Parameter
- Polling Rate
- Create a Macro (Store a sequence of keys in the software)
- Select, Save or Load a profile
- Reset default settings
- Trouble shooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IDON
PC Laptop RGB
TRUST GXT 950 Gaming Mouse
USER’S MANUAL
GXT IDON PC Laptop RGB Gaming Mouse
Mouse Button layout
| a | – Mouse Button 1 (Default = Left Mouse Button) |
|---|---|
| b | – Mouse Button 2 (Default = Right Mouse Button) |
| c | – Mouse Button 3 (Default = Mid click) |
| d | – Mouse Button 4 (Default = Forward) |
| e | – Mouse Button 5 (Default = Backward) |
| f | – Mouse Button 6 (Default = DPI +) |
| g | – Mouse Button 7 (Default = DPI -) |
Installation
A – Open the internet browser and go to
www.trust.com/23645/driver.
b – Click the “Download EXE” Mouse Button to download the software.
c – Click on the “23645_X.exe” and follow the installation wizard.
d – Click on the “TRUST GXT 950 Gaming Mouse” shortcut to start the software.
e – You can now start to configure the mouse. In the manual will be referred
to ‘Apply’ to update the mouse.
Updating the mouse can take up to 20 seconds depending on your system.
Mouse Button Programming
Assign a function
a- Click on the Button you want to re-assign
b – Click on the function you want to assign.
– Click on ‘Apply’, the mouse is being updated.
- At least one Mouse Button has to be assigned as “Left Click”.
Report rate & DPI settings
DPI setting
a – Click on the ‘DPI Setting’ tab.
b – Click on the checkbox next to the DPI number to enable or disable this DPI
level.
c – Choose a LED color for each DPI setting.
d – Change the DPI level by dragging the respective bar.
– Click on ‘Apply’, the mouse is being updated.
Light Settings
Change the Lighting
a – Click on the ‘Lighting’ tab.
b – Change the light mode.
c – Change the animation speed.
– Click on ‘Apply’, the mouse is being updated.
Other settings
Mouse Parameter
a – Change the Windows acceleration, Windows pointer speed, Windows scroll
speed or Windows doubleclick speed by dragging the respective cursor.
– Click on ‘Apply’, the mouse is being updated.
Polling Rate
a – Click on the ‘Polling Rate’ tab.
b – Change the Polling rate by clicking on the respective frequency.
– Click on ‘Apply’, the mouse is being updated.
Macro Settings
Create a Macro (Store a sequence of keys in the software)
a – Click on the ‘Macro Manager’ button.
b – Click on ‘New’ to create a new macro.
c – Set the delay time between each action and/or the loop/repeat setting.
d – Click ‘Start record’ to start recording the macro. Now enter your
preferred macro sequence.
e – Click ‘Stop record’ to stop recording the macro. (max. 62 actions)
f – Click on ‘OK’.
– The created macro is now available under the ‘Macro’ function.
- To assign a macro follow step 3 of this manual.
Profile Settings
Select, Save or Load a profile
a – Click on the ‘Profiles’ button.
b – Click on the + New icon to create a new profile.
c – Click on the ‘- Delete’ to delete a profile.
– Click on ‘Apply’ → Your mouse setup is now saved or updated to your mouse.
Reset default settings
a – Click on ‘RESET’ to reset the current profile to factory default.
b – Click on ‘OK’ to reset the current profile to factory default.
Trouble shooting
| Problem | Solution |
|---|---|
| The software is not starting. | – Make sure the TRUST GXT 950 mouse is |
connected and try to start the software again.
If your problem is not solved, please contact the help desk at www.trust.com/23645/faq.