Rolling Seeds RSMS01 Device User Manual

Rolling Seeds RSMS01 Device

THE POWER BUTTON

• To Turn ON: Press the POWER Button for 1 to 2 seconds until indicator glows red, green, blue.
• To Turn OFF: Press the POWER Button for 1 to 2 seconds until the indicator stops blinking.

HOW TO CONNECT A MOBILE DEVICE TO ROLLING SEEDS APP?

•  Press the POWER Button for 1 to 2 seconds to Turn On the Pot.
•  Turn ON the Bluetooth® of the Mobile Device you are connecting to, such as iPad, Tablet PC or Smartphone.
•  Scan the Available Devices and when Rolling Seeds is detected tap onn it.
•  The Bluetooth® of the Mobile Device will ask permission to pair with Rolling Seeds. Agree to pair.
•  Ensure there is ‘Rolling Seeds’ in the list of Connected Devices. IfPot is connected to the Mobile Device, the Pot’s blue LED indicator stops blinking and becomes solid. If blinking continues, repeat the above steps again.
•  Once Rolling Seeds is paired to a Mobile Device via Bluetooth&®, any future pairing of the same Pot and Mobile Device happens automatically when the POWER of thePot and Bluetooth® of the Mobile Device are Turned ON.
•  After connecting to Bluetooth, when NFC tag is read, green light flashes once, data of NFC tag will be sent to the mobile phone through Bluetooth.
•  Install the Rolling Seeds App from App Store or Google Play.
•  Start the Rolling Seeds App.
•  Insert the Seeds to test if the Mobile Device, Pot and Seeds are connected.
•  Once connected the games can be played on the Mobile Device by rolling the Seeds in the Pot.

BATTERY CHARGING

•  Plug the C-Type of the USB cable into the C-Type Port in the Pot
• Plug the other end into a USB wal charger or computer that is powered on.

Notes:
While charging, the battery indicator blinks green. When the battery is fully charged, the battery indicator becomes solid green. Rolling Seeds works even while charging

STATUS INDICATORS

• SMART GAME POT

  • The main platform (main console) of Rolling Seeds to play games on any smart device using the User Interface, Seeds.

• POWER BUTTON

  • To Turn On and Turn Off the Smart Game Pot.

• SMART DEVICE MOUNT

  • To mount the smart device on the Pot for easy viewing of the screen.

• BASKET

  • Where the Seeds drop and are held until reuse.

• SEED GATE

  • Opening to input the Seeds for interaction with the Smart Game Pot.

• C-PORT

  • For charging the Smart Game Pot using USB-cable.

• SEEDS

  • User Interface of Rolling Seeds to interact with the Smart Game Pot.

• SEED GATE

  • Opening to input the Seeds for interaction with the Smart Game Pot.

• C-PORT

  • For charging the Smart Game Pot using USB-cable.

• SEEDS

  • User Interface of Rolling Seeds to interact with the Smart Game Pot.

• NFC TAGS inside the SEEDS

  • Embedded NFC tags to deliver coded inputs to the Smart Game Pot.

• Visuals on the SEEDs

  • UV printed Seeds for identifying the User Interface.

• SEED TRAY
  

  • Seed Tray for organizing the Seeds.

• MINI POT

  • A small pot for storing Seeds

• LITHIUM-ION BATTERY

  • Lithium-ion battery built into the Smart Game Pot to power it.

• ANTI-SLIP PADS

  • Silicone pad attached to the bottom of the Smart Game Pot to secure it on the surface.

• SILICONE STOPPER

  • Silicone pad for holding the mounted smart device in place.

• NFC ANTENNA

  • To read the data of the Seed while rolling into the Seed Gate.

ISED RSS Warning/ISED RE Exposure Statement

ISED RSS Warning:

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

•  this device may not cause interference, and
• this device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

•  This device may not cause harmful interference, and
•  This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limíts are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>