GLORY STAR NC104 Wireless Headphone User Manual

GLORY STAR NC104 Wireless Headphone

Warning

Read the below warning thoroughly before you start using your headset. Store this manual with product packaging. The safety precaution manual reduce the risk of fire or injury when correctly complied to.

• To reduce the risk of injury :
• Keep batteries out of reach of children.
• Do not heat, open, or dispose of battery pack in fire.
• Do not allow metal objects to touch the battery on the device.
• Do not expose battery pack to excessive heat.

Product Specification

• Product model: NC104
• Bluetooth solutions: JL7006
• Bluetooth version:V5.3
• Frequency response:20Hz-20KHz
• Speaker size: Ø 40 mm
• Sensitivity: 112dB 士 3dB
• Speaker impedance:32Ω
• Effective distance: 10m
• Battery capacity: 300 mAh
• Playing time: 7-8 hours
• Charging time: about 2 hours

Operation

1. Power on/off .
   Switch to “ON ” to power on
   Switch to “OFF ” to power off

2. Connection.
   Open the Bluetooth in your phone and search the device “NC104”, click connect

3. Play/Pause music.
   When listening to music.
   Press the middle button once to play or pause the music.

4. Previous /Next Song
   When listening to music.
   Long press “-” button for 2 seconds to go to previous song.
   Long press “+” buttons for 2 seconds to go to next song.

5. Volume Adjustment
   Press “+” button once to increase volume;
   Press “-” button once to decrease volume;

6. Answer/Hang up
   When there is an incoming call.
   Press the middle button once to answer the call.
   Long press the middle button for 2 seconds to end the call.

7. Reject
   When there is an incoming call.
   Long press the middle button for 2 seconds to reject the call.

Package Contents:

• 1 x Headset
• 1 x User manual
• 1 x Type-C charging cable
• 1 x Audio cable

FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>