GLORY STAR TR X-VIBE Wireless Headphone User Manual
- July 11, 2024
- Glory Star
Table of Contents
GLORY STAR TR X-VIBE Wireless Headphone
Product Information
Specifications
- Bluetooth solutions: JL
- Bluetooth version: 5.3
- Battery capacity: 200mAh
- Playtime: 5-6 hours
- Effective distance: 10m
- Charging time: about 2H
- Speaker Size: 40mm
- Speaker Impedance: 32
Product Usage Instructions
Power On/Off
Long press the power button for 3 seconds to power on. Long press the power
button again for 5 seconds to power off.
Connection
- Open the Bluetooth settings on your phone and search for the device named TR X-VIBE, then click to connect.
- To change mode from Bluetooth to TF to FM, short press the power button.
- To play or pause the music, short press the power button.
- For incoming calls, short press to answer and long press to decline.
- To adjust the volume, long press to reduce volume or increase volume.
- Short press for the previous song and long press for the next song.
Package Contents
- 1 x Headset
- 1 x User manual
- 1 x Charging cable
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device has
been tested and found to comply with the limits for a Class B digital device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Frequently Asked Questions (FAQ)
-
Q: How long does it take to charge the headset?
A: The charging time for the headset is about 2 hours. -
Q: What is the effective distance of the Bluetooth connection?
A: The effective distance of the Bluetooth connection is 10 meters.
SAFETY WARNING
Read the below warning thoroughly before you start using your headset. Store
this manual with product packaging. The safety precaution manual reduces the
risk of fire or injury when correctly complied to.
To reduce the risk of injury:
- Keep batteries out of reach of children.
- Do not heat, open, or dispose of battery pack in fire.
- Do not allow metal objects to touch the battery on the device.
- Do not expose battery pack to excessive heat.
- Do not use over 5V adapter to charge this product.
Product Specification
- Bluetooth solutions: JL
- Bluetooth version: 5.3
- Battery capacity: 200mAh
- Playtime: 5-6 hours
- Effective distance: 10m
- Charging time: about 2H
- Speaker Size: 40mm
- Speaker Impedance: 32Ω
Operation
Power on/off.
- Long press the power button for 3s to power on
- Long press the power button again for 5s to power off
Connection.
Open the Bluetooth in your phone and search the device “TR X-VIBE”, click
connect
-
Long press for 3s to power on; Long press for 5s to power off
Short press to change mode from Bluetooth to TF to FM. -
Short press to play or pause the music.
Incoming calls: short press to answer; long press to decline. -
Long press to reduce volume.
Short press for previous song. -
Long press to increase volume.
Short press for next song.
Package Contents
- 1 x Headset
- 1 x User manual
- 1 x Charging cable
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>