Glory Star TWS74 TWS True Wireless Stereo Earphone V5.0 User Manual

TWS(true wireless stereo)earphones V5.0
Manual

Specifications:

True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair.

dock:400mah (optional)
Talk/Playtime:| Single earbud mode:3-4 hours One Pair earbuds mode:2-3 hours
Standby time:| Single earbud mode:300 hours One Pair earbuds mode:180 hours

About pairing:

1. Turn on the charging box switch(blue or red light is on).
2. Open the top cover of the charging box and take out the earphones.(Important note: Turn on the charging box switch before opening the charging box which is the premise of the headset automatic turning on)
3. Pair with other devices: Open the phone or other device Bluetooth settings, search for the Bluetooth name, click to connect to Bluetooth.
4. The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
5. The headset will automatically shut down if it’s not connected to a Bluetooth device for 5 minutes.

Note: The call support both sides of Bluetooth earphones, shut down, play, and suspension can be controlled by any one of the connected earphones,and another headset will be synchronized control.
Bluetooth usage:

1. Making phone calls: Be sure the earphone is connected to your mobile phone, and then you can make phone calls. When making calls, both sides earphones working, and there is incoming call. You answer the call by slightly touching the earphone one time and refusing to answer by quick press the power button 2 times.?
2. Listening to music: Be sure the earphone is connected to your mobile phone, then you can listen to music on your music list. Touch to stop the music and replay by touch again. Double touch the earphone to enter the voice control function, Triple touch the earphone to redial the last number.
3. Power off. Touch the earphone correct area 3-5 seconds until led in red when not used, the Bluetooth device enter off mode. Or you can put the earphone in charging box and press the button on charging box, the earphone will automatically turn off. lt would be powered off automatically when the earphone is away from your Bluetooth device for over 5 minutes. No need to worry about power being exhausted.
4. Charging: There is a reminding sound when the battery is low, and the led would flash in red at the same time. When taking charge, the led would be in red and turn in blue when fully charged.
   Note: the earphone would be forced to shut down when charging even if they are powered ON before charging.

Warnings:

1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
2. Keep away from WIFI, router, or other high-frequency transmitting equipment to prevent interruption of signal receiving.
3.  Please use this earphone under its working range (10meters), and the effect would be better if there is no obstacle between the connected devices.
4. Use this Bluetooth earphone to connect any device with Bluetooth function

Summary

1. Dust-proof mesh
2. Multi-function touch area
3. MIC
4.  Earphone charging port
5. Charging Box Light
6. Charging Box Charging port

FCC Warning Statement

FCC ID: 2AS7V-TWS74）
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>