HI home Smart Radiator Thermostat User Manual
- June 3, 2024
- HI home
Table of Contents
Smart Radiator Thermostat
User Manual
Smart
Radiator Thermostat
What’s inside the box
Specification
Power source: 2x AA Battery (do not use recharable ones)
Battery life: 1 year
Zigbee: 2.0 – 2.4GHz
Range: 30m Open Air
Connection: M30x1,5mm
Dimensions
Manual Control
Push
button for functions
Rotary knob to set temperature manually
Display
- Connection indicator
- Temperature setting
- Program active
- Heating On
- Low battery indicator
Installation
4. Wait until the pen is completely withdrawn
5. Screw the knob with M30x1.5 nut
6. Press
button. “LA” flashes for calibration – “LA” remains on as completed
Functions
Temperature setting low (<5ºC) – “OF” , Temperature setting high (>30ºC) –
“ON”
Open window function
If the radiator is on and a door or window is opened causing the room
temperature to drop more than 6ºC within 4 minutes, the thermostat will close
and display “OP”. If the temperature rises by 2ºC, the setting will resume.
Anti-blocking function
To prevent the radiator valve from blocking when the radiator is not in use
for a long period of time, the valve will be fully closed once every fortnight
for 30 seconds and opened again. The display will show “AS”.
Child lock
To prevent unwanted changes to settings, the button can be set to child lock.
To do so, press the button for 10 seconds. Child lock is confirmed with the
display “LC”. To unlock, press the button again for 10 seconds.
Anti-freeze
When switched off, the display will show “ “ when frost protection is
activated.
The frost protection function comes on at temperatures below 5ºC and switches
off at 8ºC.
Alarm
When there is a malfunction or defect, the display will show “Er”. Reset
the appliance by removing the battery and see if the malfunction has been
resolved. If this is not the case, contact your shop.
Batteries almost empty
If the battery voltage is too low and the batteries need to be replaced, the
symbol is displayed. Replace the batteries. (note: do not use rechargeable
batteries)
Temporary override
To temporarily adjust the termperature during a programme, the rotary knob can
be operated. As soon as the next programme moment is reached, the programme
will resume.
Hihome App
• Download the Hihome Smart App for iOS of Android
https://smartapp.tuya.com/hihomesmart
Zigbee Gateway
• A Hihome Zigbee Gateway is required to use the Smart Thermostat. Consult the Gateway manual to add the Gateway to your Hihome Smart Home.
Add Thermostat
• Turn the knob to the “OF” position. Then press the knob for some time
until “- – “ becomes visible. The thermostat is then reset and ready for
connection. Press “+” in the App and follow the steps.
The usage
• Set the desired temperature. If the programme is active, it will resume
at the next time point.
** Hereby, At Home Technologies BV, declares that the
Smart Radiator Thermostat is in complience with the essential requirements of
the 2014/53/EU Directives. Full Declaration of Conformity is available on the
productpage on www.hihome.eu.
Further manuals, FAQ and instructions can be found on
https://support.hihome.eu
Set Program**
• Set a day and week cycle as desired. If you are absent for a longer period
of time, the “Away” mode can be activated. The temperature setting will then
be set to 16ºC continuously.
© 2020 At Home Technologies BV
– Oosterbeek -The Netherlands. www.hihome.eu
for more information and manuals: https://support.hihome.eu
Für weitere Informationen und Handbücher:
https://support.hihome.eu
References
- Hihome, Smart Home made Easy
- Met welke radiatorkranen zijn de Hihome Smart Radiator Thermostaten compatibel? - Hihome Knowledge Base
- Hihome Knowledge Base
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>