AMYLOIOR Bluetooth Pairing R-Net Advanced Joystick and OMNI 2 User Guide
- June 3, 2024
- AMYLOIOR
Table of Contents
Bluetooth Pairing Quick Start Guide
R-Net Advanced Joystick
and OMNI 2
User Guide
Bluetooth Pairing R-Net Advanced Joystick and OMNI 2
Steps for pairing either the Advance Joystick or the OMNI 2 with any devices (Android, Apple or PC) :
TURN ON THE BLUETOOTH MODE ON THE JOYSTICK/OMNI 2:
- In the settings menu, select Bluetooth. (To enter the settings menu, press and hold top button: on the left of the screen for the joystick; and on the right of the screen for the OMNI 2).
- Set target device(s) to < On >. (“Mouse” for Android or PC and “iDevice” for Apple products)
- The joystick/OMNI 2 must be switched off and on again.
SET THE JOYSTICK OR OMNI 2 IN DISCOVERY MODE:
- On the joystick/OMNI 2, navigate to the Bluetooth mode by pressing the < mode > button.
- For the joystick: Toggle forward and hold until a beep is heard (about 10 seconds). Then, toggle backward and hold until a beep is heard (about 10 seconds).
- For the OMNI 2: Press the top arrow on the push-button and hold until a beep is heard (about 10 seconds). Then, press the bottom arrow on the push-button and hold until a beep is heard (about 10 seconds).
- The Bluetooth symbol should blink on the top of the screen.
This means that the joystick/OMNI 2 is in discovery mode.
THE DEVICE CAN NOW BE PAIRED WITH THE JOYSTICK OR THE OMNI 2…
For more information on how to pair a device with either the joystick or the
OMNI 2, or on the Bluethooth functionality, please refer to the Curtiss-Wright
document (Chapter 6) on our website at
www.amylior.com.
Phone: +1 450 424-0288
Fax: +1 450 424-721 1
info@amysystems.com
amysystems.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>