BOSCH GLI18V-1900 Cordless Torch Instruction Manual

: June 3, 2024
: Bosch

BOSCH GLI18V-1900 Cordless Torch

Safety Symbols

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols

| This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
---|---
| DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
| WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
| CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, will result in minor or moderate injury.

IMPORTANT SAFETY INSTRUCTIONS

****Read all safety warnings and all instructions in this manual and in the battery charger manual. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

Do not use outdoor. This worklight is intended for household use only. Using it outdoor may increase the risk of electric shock or fire
Do not wash the worklight with water nor keep in a damp location. If the worklight gets wet, dry it off as soon as possible
To reduce the risk of electrical shock, do not put the unit in water or other liquid. Do not place or store unit where it can fall or be pulled into a tub or sin
Do not work with the cordless worklight in hazardous areas
After the automatic shut-off of the cordless worklight, do not continue to press the On/Off button. The battery could become damaged.
Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance).
Use only original Bosch accessories
Do not cover the lamp head while operating the cordless worklight. The lamp head heats up during operation and can cause burns or fire when the heat accumulates.
Do not use the cordless worklight in road traffic. The cordless worklight is not approved for illumination in road traffic
Remove the battery from the cordless worklight before any work on the cordless worklight itself (e.g. assembling, maintenance, cleaning, etc.), as well as when transporting and storing.
Do not allow children to use the cordless worklight. It is intended for professional use. Children can unintentionally blind themselves or other persons
Do not position the lighted worklight head on or near flammable or combustible materials. The bulb gets hot during use.
The lens gets very hot during use. To reduce the risk of burns, do not touch hot lens. To reduce the risk of fire, keep away from combustible materials while in operation
Do not splash the lighted worklight bulb with liquids. Hot bulb may shatter when cooler liquids are contacted
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack
Use the battery only in conjunction with your Bosch product. This measure alone protects the battery against dangerous overload
Use only original Bosch recommended batteries. When using other batteries, e. g. imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns
In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
The worklight is ruggedly constructed. It should, however, be handled with care.
Check the charge level at least once a month, especially if used for emergency purposes. If the light seems dimmer, recharge the battery pack

USER-MAINTENANCE INSTRUCTION

**** All repairs, electrical or mechanical, should be attempted only by trained repairmen. Contact the nearest Bosch Factory Service Center, Authorized Service Station or other competent repair service.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

Symbols

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

Symbol

| Designation / Explanation
---|---

V

| Volts (voltage)

A

| Amperes (current)

Ah

| Amp hour (measurement of battery capacity)

b

| Hertz (frequency, cycles per second)

W

| Watt (power)

kg

| Kilograms (weight)

min

| Minutes (time)

s

| Seconds (time)

⌀

| Diameter (size of drill bits, grinding wheels, etc.)

n0

| No load speed (rotational speed at no load)

n

| Rated speed (maximum attainable speed)

…/min

| Revolutions or reciprocation per minute (revolutions, strokes, surface speed, orbits etc. per minute)

0

| Off position (zero speed, zero torque…)

1, 2, 3, … I, II, III,

| Selector settings (speed, torque or position settings. Higher number means greater speed)
| Infinitely variable selector with off (speed is increasing from 0 setting)
| Arrow (action in the direction of arrow)
| Alternating current (type or a characteristic of current)
| Direct current (type or a characteristic of current)
| Alternating or direct current (type or a characteristic of current)
| Class II construction (designates double insulated construction tools)
| Earthing terminal (grounding terminal)
| Designates Li-ion battery recycling program
| Designates Ni-Cad battery recycling program
| Alerts user to read manual
| Alerts user to wear eye protection
| This symbol designates that this tool is listed by Underwriters Laboratories.
| This symbol designates that this component is recognized by Underwriters Laboratories.
| This symbol designates that this tool is listed by Underwriters Laboratories, to United States and Canadian Standards.
| This symbol designates that this tool is listed by the Canadian Standards Association.
| This symbol designates that this tool is listed by the Canadian Standards Association, to United States and Canadian Standards.
| This symbol designates that this tool is listed by the Intertek Testing Services, to United States and Canadian Standards.
| This symbol designates that this tool complies to NOM Mexican Standards.

Functional Description and Specifications

**** Disconnect battery pack from tool before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally

Cordless Worklight

Model number: GLI18V-1900
Voltage rating: 18V
NOTE: For tool specifications refer to the nameplate on your tool.

Assembly

INSERTING AND RELEASING BATTERY PACK

To insert battery: align and slide battery pack into worklight until it locks into position (an audible click sound is an indication that the battery is locked) (Fig. 2). Do not force.
To remove the battery pack: press the battery pack release button and slide the battery pack completely out of worklight housing.

Operating Instructions

PROTECTION AGAINST DEEP DISCHARGING

The lithium ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the cordless worklight is switched off by means of a protective circuit

TURNING THE WORKLIGHT ON

To turn the worklight ON, press the On/Off switch. To turn worklight OFF, press the On/Off switch (Fig. 1).
Do not continue to press the On/Off switch after the cordless worklight has been automatically switched off. The battery can be damaged.

TEMPERATURE DEPENDENT OVERLOAD PROTECTION

In order to protect both the user as well as the worklight, the worklight switches off if the heat sink temperature reaches 140°F (60°C). Allow the cordless worklight to cool down, then switch the cordless worklight on again.

LOW BATTERY WARNING

Shortly before the cordless worklight switches off because of a low battery, it will flash 3 times and shine with reduced brightness

ADJUSTING THE BRIGHTNESS

Press the On/Off switch briefly to switch on the cordless worklight at maximum brightness. To reduce the brightness to 1000 lumens, hold down the On/Off switch until the brightness changes. To return to 1900-lumen setting, repeat this process.

RUN TIME

The run time will depend – in part – on the Bosch battery capacity.

Battery Ah| 1900 Lumen Setting Run Time Up To| 1100 Lumen Setting Run Time Up To
---|---|---
2.0 Ah| 1.6 Hours| 3.3 Hours
4.0 Ah| 3.3 Hours| 6.6 Hours
5.0 Ah| 4.2 Hours| 8.3 Hours
6.0 Ah| 5 Hours| 10 Hours

STANDING UP

Carefully fold out the pedestal and place the cordless worklight on the floor. Ensure that it has a firm footing.

SWIVELING STAND

The lamp head can be swiveled a maximum 120° in 30-degree steps to suit the application (Fig. 3).

FASTENING TO AN OPTIONAL TRIPOD

You can use the tripod mount to screw the cordless worklight onto an optional tripod that has 5/8”-11 threading (sold separately).
Thread the cordless work light onto the tripod. Ensure that the cordless work light is securely mounted to the tripod.

Maintenance

Service

NO USER SERVICEABLE PARTS INSIDE.
Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recommend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICEMEN: Disconnect tool and/or charger from power source before servicing.

BATTERIES

Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance or significantly shorter running time between charges then it is time to replace the battery pack. Failure to do so can cause the tool to operate improperly or damage the charger.

Cleaning

To avoid accidents, always disconnect the tool and/or charger from the power supply before cleaning. The tool may be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning tools with compressed air.

To avoid damage, clean the plastic lens of the cordless worklight only with a dry, soft cloth.
Do not use cleaning agents or solvent.

Certain cleaning agents and solvents damage plastic parts. Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

LIMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS

Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase.
SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited
Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable or benchtop power tool product, transportation prepaid, to any BOSCH Factory Service Center or Authorized Service Station. For Authorized BOSCH Power Tool Service Stations, please refer to your phone directory.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE AND BENCHTOP ELECTRIC TOOLS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL BOSCH DEALER OR IMPORTER.

© Robert Bosch Tool Corporation 1800 W. Central Road Mt. Prospect, IL 60056-2230 Exportation pore:
Robert Bosch Tool Corporation Mt. Prospect, IL 60056 2230, E.U.A.