CHARGECORE WLC-OMTRI-931 Magnetic 3-in-1 Travel Charging Pad User Manual

User Manual Magnetic 3-in-1 Travel Charging Pad
WLC-OMTRI-931

Thank you for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:

WLC-OMTRI-931 Magnetic 3-in-1 Travel Charging Pad

https://www.laserco.com.au/

WHAT’S IN THE BOX

• 3-in-1 Magnetic Travel Charging Pad
• 20W PD Charger
• Charging Cable
• Travel Case
• User Manual

SPECIFICATIONS

3-IN-1 WIRELESS CHARGING STATION

12V/2A
Output (Phone):| 5W, 7.5W, 10W, 15W
Output (Watch):| 2.5W
Output (Earbuds):| 3W
Dimensions Unfolded:| 300 x 80 x 8mm
Dimensions Folded:| 85 x 80 x 28mm
Weight:| 110.4g
20W PD CHARGER
Input:| 100-240V, 50/60Hz,
0.5A
USB-C Output:| 5V/3A, 9V/2.2A,
12V/1.67A
PD (Power Delivery):| 20W
Weight:| 41.8g

PRODUCT DIAGRAM

TIPS FOR SAFE CHARGING

1. AVOID OVERCHARGING.
   Disconnect chargers and devices after the battery reaches a full charge. Leaving devices on a charger too long can cause them to overheat and can reduce battery life.

2. PICK THE RIGHT CHARGER.
   Only use the charger and cable that came with your device. If no charger was supplied or using your own charger, always follow the manufacturer’s recommend charger requirements. Take special care to match the correct voltage and amp values your device requires when picking a charger. Chargers are designed for specific battery types; mixing chargers and batteries could result in unexpected problems.

3. CHARGE ONLY ON NON-FLAMMABLE SURFACES.
   Devices and chargers can get warm or sometimes even hot during charging. Make sure to always place the device and charger on a non-flammable surface when charging. Do not place on beds, pillows, paper, or near any fabric such as curtains or clothing under any circumstances.

4. AVOID EXTREME ENVIRONMENTS.
   Do not recharge your devices in environments where extreme temperatures can occur. On particularly hot days do not charge in places such as the inside of a car, or an
   unairconditioned room. If it’s possible, try and wait till the evening when temperatures are a bit cooler.

5. MONITOR CHARGING.
   Recharge your devices while you are nearby, preferably in the same room or another room close by. This way when there is a defective battery or charger, you are able to take it off the power supply immediately.

COMPATIBILITY LIST

Qi-enabled earbuds.

TROUBLESHOOTING

SLOW CHARGING:

• Check there are no obstructions on the back of your device such as credit cards or metal objects.
• Put the device on the centre of the charging surface.
• Phone cases cannot be thicker than 5mm.
• Check you are only using the supplied Power Adapter and Charging Cable.

DEVICE NOT CHARGING:

• Power off/on your device and try charging again.
• Try another charging cable from the adapter to the 3-IN-1 Charger.
• Make sure you are using the supplied charging adapter and cable.
• Check if your phone supports Qi wireless charging.

DEVICE OR CHARGER GETS VERY HOT DURING CHARGING:

• It is normal for the charging coil to generate heat  during wireless charging. If you feel the charger is too hot, then take the device off the charging surface and wait till it has cooled down.
• Make sure you are using the supplied charging adapter and cable.

Visit our website
www.laserco.com.au

https://www.laserco.com.au/support

Check us out at
www.youtube.com/lasercoau

https://www.youtube.com/channel/UCQOuBKnSya0x9zCjPfYzklg

Documents / Resources

| CHARGECORE WLC-OMTRI-931 Magnetic 3-in-1 Travel Charging Pad [pdf] User Manual
WLC-OMTRI-931 Magnetic 3-in-1 Travel Charging Pad, WLC-OMTRI-931, Magnetic 3-in-1 Travel Charging Pad, Travel Charging Pad, Charging Pad, Pad
---|---

References

• Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>