ITC 69365 Oblong Courtesy Light Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 69365 Oblong Courtesy Light
PARTS NEEDED:
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Light is rated for interior installation only, do not install in wet locations.
- Operating Voltage: 10 – 14V DC
- Do not install any luminaire assembly closer than 6” from any curtain or other combustible material
INSTALLATION INSTRUCTION
-
Determine where your LED light fixture will be installed. Once determined, drill a hole for the wires.
-
Use the wiring diagram below to wire the light to the units power. Test the light
- Mark location of screw holes and pre-drill. Screw in fixture and snap bezel onto the light.
Single Color Wiring
ABOUT COMPANY
- 3030 Corporate Grove Dr.
- Hudsonville, MI 49426
- Phone: 616.396.1355
- itc-us.com
- For warranty information please visit www.itc-us.com/warranty-return-policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>