LUBAIR 4500 Sq.ft 50 Pint Dehumidifiers for Basements and Home User Manual

June 15, 2024
LUBAIR

LUBAIR 4500 Sq.ft 50 Pint Dehumidifiers for Basements and Home

Product Information

Specifications

  • Model: [Model Number]
  • Power: [Power Rating]
  • Capacity: [Dehumidifying Capacity]
  • Noise Level: [Noise Level in decibels]
  • Dimensions: [Product Dimensions]
  • Weight: [Product Weight]

Product Usage Instructions

Starting the Dehumidifier
To start the dehumidifier, follow these steps:

  1. Ensure that the power cord is plugged into a grounded outlet.
  2. Press the power button located on the control panel.
  3. Set the desired humidity level using the humidity control buttons.

Troubleshooting Common Issues
The Dehumidifier Does Not Start  If the dehumidifier does not start, please check the following:

  • Ensure that the power cord is securely plugged into a working outlet.
  • Check if the power switch is turned on.
  • If the issue persists, contact our customer support at  [email protected].

The Dehumidifier Does Not Work as It Should
If the dehumidifier is not functioning properly, please try the following:

  • Make sure that the air filter is clean and not clogged.
  • Check if the humidity level is set correctly.
  • If the issue persists, contact our customer support at [email protected].

The Dehumidifier Makes a Loud Noise When Operating
If the dehumidifier is making a loud noise, please check the  following:

  • Ensure that the dehumidifier is placed on a level surface.
  • Check if there are any loose parts or obstructions inside the unit.
  • If the issue persists, contact our customer support at [email protected].

Water is Leaking When the Dehumidifier is Running
If water is leaking from the dehumidifier, please follow these steps:

  1. Check if the water tank is properly inserted and not overflowing.
  2. Inspect the drainage hose for any blockages or leaks.
  3. If the issue persists, contact our customer support at [email protected].

The Full Indicator is On Even Though There is No Water in  the Tank
If the full indicator is on but there is no water in the tank, try the following:

  • Remove the water tank and empty any residual water.
  • Check if the float switch inside the dehumidifier is stuck or malfunctioning.
  • If the issue persists, contact our customer support at  [email protected].

Little or No Effect in Dehumidifying
If the dehumidifier has little or no effect in dehumidifying, please check the following:

  • Ensure that the dehumidifier is appropriately sized for the room.
  • Check if there are any sources of excess moisture in the room.
  • If the issue persists, contact our customer support at [email protected].

Unpleasant Smell When the Dehumidifier is Running
If the dehumidifier emits an unpleasant smell, please try the following:

  • Inspect and clean the air filter.
  • Ensure that the room is well-ventilated.
  • If the issue persists, contact our customer support at  [email protected].

Humidity Discrepancy
If the humidity displayed by the dehumidifier differs from your test results, consider the following:

  • Allow the dehumidifier to run for at least 24 hours to stabilize.
  • Ensure that the dehumidifier is placed in an appropriate location away from direct sunlight or heat sources.
  • If the issue persists, contact our customer support at [email protected].

Additional Features
[Describe any additional features or functionalities of the product here.]

Frequently Asked Questions (FAQ)

  • Q: Why does this unit give off heat?
    A: The dehumidifier produces heat as a byproduct of its dehumidification process. This is normal and helps to maintain the desired humidity level.

  • Q: How can I change the humidity?
    A: To change the humidity level, use the humidity control buttons on the control panel. Increase or decrease the setting according to your preference.

  • Q: Does my unit have a warranty?
    A: Please refer to the warranty information provided with your product packaging or contact our customer support at [email protected] for warranty details.

  • Q: What if we receive a damaged or defective product?
    A: If you receive a damaged or defective product, please contact our customer support at [email protected] for assistance. Provide them with the necessary details and they will guide you
    through the next steps.

The dehumidifier does not start

  1. Make sure the dehumidifier’s plug is inserted completely into the outlet.
    If the plug and power cord are connected.please wait l O minutes before restarting (because the machine need take l O minutes to recover).  When the machine does not work, wait at least 3 minutes before restarting to avoid damage to the compressor.

  2. Check the house fuse/circuit breaker box.

  3. The dehumidifier has reached its preset level or the tank is full.

  4. Tank is not in the proper position.

  5. Auto-defrost is in progress. The unit can’t be started temporarily.

  6. Humidity is less than 30%, Or it has already reached the set humidity.

  7. When receiving the package, the dehumidifier was placed inverted or sideways. Please leave it in the upright position for more than a day before turning it on. If  the startup is abnormal, please contact customer service.

The dehumidifier does not work as it should

  1. Did not allow enough time to remove the moisture.
  2. Make sure there are no curtains, blinds, or furniture blocking the front or back of the dehumidifier.
  3. The humidity selector may not be set low enough.
  4. Check that all doors, windows, and other openings are securely closed.
  5. Room temperature is too low or too high, below 41 °F (5°C)or above95°F (35°C).
  6. A kerosene heater or something is giving off water vapor in the room.
  7. Area to be dehumidified is too large. The capacity of your dehumidifier may not be adequate.
  8. Please place it as close to the moisture source as possible

The dehumidifier makes a loud noise when operating

  1. The swooshing sound of the flow of refrigerant is normal.
  2. Noise will rise if the compressor has just started. After a few minutes, the sound will decrease.
  3. The air filter or the air outlet is clogged. Clean the filter or contact the seller to obtain a new filter.
  4. The dehumidifier is tilted instead of the upright as it should be.
  5. The unit is placed on an uneven floor.

When the dehumidifier is running, water is leaking

  1. Please check the hose is installed correctly. Make sure it is connected tightly.
  2. Please make sure you don’t bend the hose. Also, the water outlet of the unit should be higher than the height of the water pipe placement position. Or it will cause the water flows back into the machine.
  3. lf you operate an extended drain hose, please check the connection of the drain hose for any damage.
  4. Please ensure that the machine is placed horizontally on the ground. If you want to use the dehumidifier in a higher place, you can use the foam in the package to elevate it.
  5. Would you please check the water tank is defective or not? If yes, please get in touch with the seller for a replacement.

The full indicator is on even though there is no water in the tank

  1. Please make sure the water tank is installed correctly; if not, the full indicator will be on.
  2. Please check the Water full sensor is stuck or not.

There is little or no effect in dehumidifying

  1. The room temperature is too low, or the environment humidity is less than 35%
  2. Humidity level may be improperly set.
  3. Auto-defrost is in progress. The unit can’t be started temporarily.

When the dehumidifier is running, it makes an unpleasant smell

  1. The smell may come from the wall, furniture, and other things.
  2. Disconnect the power if an unpleasant smell comes with smoke and contact  Customer Service for a solution.

The humidity I tested is different from the humidity displayed by the dehumidifier

  1. Normally, different brands of dehumidifiers or hygrometers use different sensor chips with certain errors.
  2. Please be sure to place the hygrometer probe at the position of the sensor of the dehumidifier (the corner of the air inlet inside the filter screen), so as to ensure the consistency of the detection position. If you do not know the location of the sensor, please contact customer service at:
  3. Please ensure that the dehumidifier operates stably for more than half an hour.

Why does this unit give off heat?
It is a normal situation. Humid air is pulled into the dehumidifier and passes over refrigerated cooling coils. Moisture from the air collects on these coils then drops into the drain tank. Your dehumidifier emits heat because it takes a lot of energy to keep the coils refrigerated and the fan operating.

How can I change the humidity?
If you have read the operation manual and still don’t know how to set the humidity, please contact your email: [email protected] We will send you an operation video.

Does my unit have a warranty?
All LUBAIR products come with warranty, please contact our professional customer service: [email protected]

What if we receive a damaged or defective product?

  • Our product has been checked carefully before packing and shipping, the product may be damaged due to violent transportation.
  • If you received a defective product, please contact [email protected]  for a free replacement or a full refund.

Contact Customer Support
If you have any questions, please contact the seller, your problems will be solved within 24 working hours. There are two methods to solve your issue effectively.  Please contact Ruwora professional customer  service: [email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LUBAIR User Manuals

Related Manuals