ITC 69360 Oblong Courtesy Light Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 69360 Oblong Courtesy Light
PARTS NEEDED
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Light is rated for interior installation only, do not install in wet locations.
- Operating Voltage : 10 – 14V DC
- Do not install any luminaire assembly closer than 6” from any curtain or other combustible material
INSTALLATION INSTRUCTIONS
- Determine where your LED light fixture will be installed. Once determined, drill a hole for the wires.
- Use the wiring diagram below to wire the light to the units power. Test the light
- Mark location of screw holes and pre-drill. Screw in fixture and snap bezel onto the light.
3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc- us.com
For warranty information please visit www.itc-us.com/warranty-return- policy Rev B 04/07/20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>