ITC 21005 Digital Dimmer Instruction Manual
- June 3, 2024
- ITC
Table of Contents
INSTALLATION INSTRUCTIONS
Digital Dimmer
Part#: 21005
PARTS/TOOLS NEEDED:
|
---|---
Dimmer Switch| Bezel & Knob (optional)
|
Mounting Screws| Wire Nuts
Power Drill
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND
SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
-
Determine the installation location for your switch and cut a 1-1/2” x 2” hole using a drywall saw.
-
Using wire nuts attached the units’ power to the wires labeled input and attach the output side to your selected light fixture. (figure 1)
-
Feed wires back through the hole and screw the switch in place using the screws provided.
-
To attach the bezel, first remove the black knob. Slide bezel onto switch and install new knob.
Figure 1: Wire the switch based on the wiring diagram below.
3030 Corporate Grove DrHudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
DOC #: 710-00097 • Rev B •11/16/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>