ITC 69728SS Docking Light Installation Guide

June 3, 2024
ITC

ITC 69728SS Docking Light

PARTS/TOOLS NEEDED

ITC-69728SS-Docking-Light-FIG-1

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL IN-STRUCTIONS.

  • Disconnect power before installing, adding or changing any component.
  • To avoid a hazard to children, account for all parts and destroy all packing materials.
  • It is recommended that fuse protection be added to the positive(+) input.
  • Technical Specs:
    Voltage: 10 – 14V DC | Current: 0.12A | Wattage: 1.6W

INSTALLATION INSTRUCTIONS

  1. Determine the installation location and drill a 1/2” hole for the wire. Drill two mounting holes at 1.4” on center.
  2. Using the wiring diagrams below, wire the light to the incoming 12V DC power. Test the light.ITC-69728SS-Docking-Light-FIG-3
  3. Feed the wires back through the hole and push the light into the mounting holes. Use application specific sealant around the light to prevent any ingress of water. Tighten the nuts on back to hold it in place.

For warranty information please visit www.itc-us.com/warranty-return- policy

3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355
itc-us.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals