ITC 69253 Radiance Surface Mount Light Instruction Manual
- June 3, 2024
- ITC
Table of Contents
Radiance™ Surface
Mount Light
Part#: 69253, 69353, and 69453
INSTALLATION INSTRUCTIONS
69253 Radiance Surface Mount Light
PARTS/TOOLS NEEDED:
| | |
Radiance Overhead Light| #8 Mounting Screws (Not Provided)| Butt Splice
Connectors (Not Provided)| Power Drill (Not Provided)
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
-
Determine the installation location and mark the location of the screw holes. Drill a hole and pull the units wiring though. Using the wiring diagram at the right to wire the light to the units power.
-
Feed the wired back through the hole and screw the light in using #8 screws (Not Provided). Install the les and test the light.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visitwww.itc-us.com/warranty-return-
policy
DOC #: 710-0007
Rev B
11/22/22
Documents / Resources
| ITC
69253 Radiance Surface Mount
Light
[pdf] Instruction Manual
69253, 69353, 69453, 69253 Radiance Surface Mount Light, 69253, Radiance
Surface Mount Light, Surface Mount Light, Mount Light, Light
---|---
| ITC
69253 Radiance Surface Mount
Light
[pdf] Instruction Manual
69253 Radiance Surface Mount Light, 69253, Radiance Surface Mount Light,
Surface Mount Light, Mount Light