SERV IT Suspension, Pass Through Strip Heat Lamps User Manual
- June 3, 2024
- SERV IT
Table of Contents
USER MANUAL
Suspension/Pass-Through
Strip Heat Lamps
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
UNIT MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES.
Models: 423BLS2, 423BLS3, 423BLS4, 423BLS5, 423BLS6, 423BLS7, 423BLS8,
423BLPT2, 423BLPT3, 423BLPT4, 423BLPT5, 423BLPT6, 423BLPT7, 423BLPT8
Owner’s Information
Please complete this information and retain this manual for the life of the
equipment. For warranty purposes, please fill out and retain this information.
An example of the serial plate(s) for these units are included below for
reference.
Model No.____
Serial No._____
Date of Purchase:___
Serial Plate Example:
ITEM #: 423BLS2
MANUFACTURER MODEL #: BLS2
DESCRIPTION: SUSPENSION HEAT LAMP, 2 BULB
VOLTAGE: 120V
WATTAGE: 500W
SERIAL #:
MADE IN CHINA
ServIt Suspension & Pass-Through Strip Heat Lamps are designed to keep foods
at optimum serving temperatures without affecting quality. They are built for
tough kitchen duty while constructed of aluminum for easy installation and
cleaning. Suspension & Pass-Through Strip Heat Lamps keep plated meals and
portions of food hot and flavorfresh until served.
ServIt lamps come in a standard attractive silver finish, perfect for front-
of-house installation or use in a variety of portable applications. Each pair
of bulbs includes a dedicated yet simple on/off switch for easy operation of
select bulbs. The shatterproof 250W bulbs are easy to swap out for different
colored bulbs to accommodate different foods on display.
Suspension units are easily hung with included chains and standard cord and
plugs which can be stripped down for hardwire installation. Pass-through units
come with T-legs that are perfect for portable/mobile applications, or where
suspending the unit is inconvenient.
This manual provides the installation, safety, and operating instructions for
Suspension & Pass-Through Strip Heat Lamps. ServIt recommends all
installation, operating, and safety instructions appearing in this manual to
be read prior to installation or operation of the unit.
SAFETY WARNINGS
ServIt Suspension & Pass-Through Strip Heat Lamps are designed, built, and
sold for commercial use and should be operated by trained personnel only.
Clearly post all CAUTIONS, WARNINGS, and OPERATING INSTRUCTIONS near each unit
to ensure proper operation and to reduce the chance of personal injury and/or
equipment damage.
WARNING: Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance. Keep the area free and
clear of combustible materials.
WARNING: Improper installation, adjustment, alteration, service, or
maintenance can cause property damage, injury, or death. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing or servicing this equipment.
CAUTION: These models are designed, built, and sold for commercial use
only. If these models are positioned so the general public can use the
equipment, make sure all cautions, warnings, and operating instructions are
clearly posted near each unit so that anyone using the equipment can use it
correctly and not injure themselves or the equipment.
CAUTION: Make sure food product has been heated to the proper food-safe
temperature before placing in unit. Failure to heat food product properly may
result in serious health risks. This unit is for holding preheated food
product only.
ELECTRIC SHOCK HAZARD:
- Wire unit into properly grounded electrical panel of the correct voltage, size, and configuration.
- Suspension & pass-through strip heat lamps must be installed by a qualified electrician. Installation must conform to all local electrical codes. Installation by unqualified personnel will void unit warranty and may lead to electric shock or burn, as well as damage to unit and/or its surroundings.
- Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow unit to cool before performing any cleaning, adjustments, or maintenance.
- DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or saturated with water.
- Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C).
- Do not clean unit when it is energized or hot.
- Do not steam clean or use excessive water on the unit.
- This unit is not “jet-proof” construction. Do not use jetclean spray to clean this unit.
- Do not pull unit by power cord.
- Discontinue use if power cord is frayed or worn.
- Do not allow liquids to spill into the unit.
- This unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.
FIRE HAZARD:
- Locate heat lamp shade a minimum of 1″ (25 mm) from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur.
- Do not use harsh chemicals such as bleach (or cleaners containing bleach), oven cleaners, or flammable cleaning solutions to clean this unit.
BURN HAZARD:
- Some exterior surfaces on unit will get hot. Use caution when touching these areas.
SPECIFICATIONS
-
Cordset Configuration: 250W per bulb, 120V, 3 wire grounded cord with plug.
NOTE: 2/3/4 bulb units include a single cord and plug, while 5/6/7/8 bulb units include 2 cords and plugs. -
If the supply cord is damaged, the manufacturer or an authorized service agent or a similarly qualified person must replace it to avoid a hazard or voiding the warranty.
Item #| # of Bulbs| Voltage| Wattage| # of Cords and
Plugs
---|---|---|---|---
Suspension Cord
423BLS2| 2| 120V| 500W| 1
423BLS3| 3| 120V| 750W| 1
423BLS4| 4| 120V| 1000W| 1
423BLS5| 5| 120V| 1250W| 2
423BLS6| 6| 120V| 1500W| 2
423BLS7| 7| 120V| 1750W| 2
423BLS8| 8| 120V| 2000W| 2
Item #| # of Bulbs| Voltage| Wattage| # of Cords and
Plugs
---|---|---|---|---
Countertop T-Leg
423BLPT2 2| | 120V| 500W| 1
423BLPT3| 3| 120V| 750W| 1
423BLPT4| 4| 120V| 1000W| 1
423BLPT5| 5| 120V| 1250W| 2
423BLPT6| 6| 120V| 1500W| 2
423BLPT7| 7| 120V| 1750W| 2
423BLPT8| 8| 120V| 2000W| 2
PARTS LIST
# Description
1 Upper Frame
2 Lamp Shade
3 Leg Components (Countertop Models Only)
3a Frame
3b Base
3c Plastic Cap
3d Plastic Feet
4 Insulation Pad| 5 Fixed Block
6 Switch Plate
7 Connector (Used on 5/6/7/8 Bulb Units)
8 On/Off Switch
9 Cord Grip
10 NEMA 5-15P Power Cord
11 M5 Screw
12 Lamp Socket
13 Hanging Chains (Not Pictured)
---|---
ASSEMBLY & INSTALLATION INSTRUCTIONS
Serv It Suspension and Pass-Through Heat Lamps come partially assembled out of the box. All units in pass-through configuration with T-Legs require installation of legs. All suspension and pass-through 5, 6, 7, 8 bulb units come disassembled for easier transportation. The two sections of bulbs must be secured together using the included connector (423BLSCON) and applying red thread locker to the bolts. 2, 3, 4 bulb units only operated in suspension fashion do not have assembly instructions
- Unpack units and dispose of all packaging except documentation.
- Set one section of the heat lamp on a flat, level surface with the cord and plug facing left.
- Unscrew the attached bolt on the heat lamp section opposite to the cord and plug side.
- Insert the connector and tighten down with bolt that has red thread locker applied.
- Place the second section of the heat lamp on the same surface with the cord and plug facing right.
- Unscrew the attached bolt on the heat lamp section opposite to the cord and plug side.
- Slide the connector into the section of heat lamp and tighten down bolt with red thread locker applied.
For Suspension Units:
- Unscrew the attached bolts on the ends of the heat lamp (next to the cord and plug).
- Using the included chain, loop one hook through the bolt hole on the heat lamps.
- Loop the hook on the opposite end of the chain onto the mounting ceiling or over shelf.
- Repeat on the opposite side of the heat lamp with the other chain.
For Pass-Through Units:
- Unscrew the attached bolts on the ends of the heat lamps (next to the cord and plug)
- Insert one t-leg into the exposed opening of the heat lamp and tighten down with bolt that has red thread locker applied
- Repeat on the opposite side of the lamp with the other leg
OPERATING INSTRUCTIONS
General Information:
- Always clean equipment thoroughly before first use.
- Check rating label for your model designation and electrical rating.
- Ensure unit is installed properly by a qualified electrician.
WARNING: ELECTRICAL SHOCK HAZARD.
FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL COULD RESULT IN SERIOUS
INJURY OR DEATH. Do not modify the power supply cord plug. If it does not fit
into the outlet, have the proper outlet installed by a qualified electrician.
Do not use an extension cord with this appliance. Check with a qualified
electrician if you are unsure as to whether the appliance is properly
grounded.
General Operating Instructions:
- All foodservice equipment should be operated by trained personnel.
- Do not place arms, hands, or other objects not desired to be heated under the heat lamp.
- Never hold perishable food below 150°F (66°C).
- To turn the unit ON, flip the lamp switch to the “on” position.
- To turn the unit OFF, flip the lamp switch to the “off” position.
- Never leave the unit on unsupervised, overnight, or during service down-times.
General Cleaning Instructions:
- NEVER clean any electrical unit by immersing it in water. Turn off before surface cleaning.
- Always clean equipment thoroughly before first use. Clean unit daily.
- Turn off electrical units before cleaning or servicing.
- Do not use abrasive pads or scrubbers as it may damage the finish of the lamp shade.
TROUBLESHOOTING
| Issue | Solution |
|---|---|
| Light(s) Not Working | Check if the unit is properly connected and the power |
switch is in the “on” position.
Check hardwire power line for volts.
Check if the bulb has blown.
Loose Socket| Turn off power and check if socket is loose or broken. Remove
the bulb and tighten the socket screws.
Loose Shade| Turn off power and check if socket is loose or broken. Remove the
bulb and tighten the shade screws.
Unit Blows Fuse or Circuit Breaker| Check to make sure circuit is not
overloaded and all electrical connections are properly secured.