EXPO BORSE 613-400751 2-in-1 Battery-Powered Vacuum Cleaner Instruction Manual
- June 3, 2024
- EXPO BORSE
Table of Contents
INSTRUCTION MANUAL 613-400751
2-in-1 Battery-Powered
Vacuum Cleaner
Instruction Manual
Read these instructions carefully before switching on the appliance and keep them for future reference. Failure to follow and observe these instructions could lead to an accident.
DESCRIPTION
A. Ergonomic handgrip
B. Stick vacuum cleaner ON/OFF button (2 speed ECO/TURBO)
C. Battery indicator
D. Handle
E. Main body
F. Hand-held vacuum cleaner
G. Folding handle button
H. Hand-held vacuum extraction button
I. Hand-held vacuum ON/OFF button (2 speed ECO/TURBO)
J. Deposit extraction button
K. Motor filter
L. Motorized Turbobrush
M. Rotating brush
N. Wheels
O. Wall mounting
P. Charger
Q. Accessory: Lance and upholstery brush
R. Accessory holder
SAFETY ADVICE AND WARNINGS
– This appliance can be used by children aged 8 and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they are supervised or given instructions concerning use of the
appliance in a safe way and understand the hazards involved.
– Cleaning and user maintenance must not be carried out by children unless
they are supervised
– This appliance is not a toy.
Children should be supervised to ensure that they do not play with the
appliance.
– Disconnect the battery charger from the mains when not in use and before
undertaking any cleaning task.
– Only use the appliance with the specific electric base/connector supplied
with the appliance.
– If the mains connection is damaged, it must be replaced. Take the appliance
to an authorised Technical Assistance Service in order to prevent any danger.
Do not attempt to dismantle or repair it yourself.
– Before disposing of the appliance, remove the battery.
– Disconnect the appliance from the mains supply before removing the battery.
– The battery must be disposed of safely.
– Ensure that the voltage indicated on the charger rating label matches the
mains voltage before plugging in the charger.
– The plug on the battery charger must fit into the power outlet socket
properly.
Do not modify the plug. Do not use plug adaptors.
– Do not force the power cord.
Never use the power cord to lift up, carry or unplug the battery charger.
– Do not touch the plug with wet hands.
– Do not use the appliance if the cable or plug is damaged.
– If any of the appliance casings break, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
– Do not use the appliance if it has fallen on the floor, if there are visible
signs of damage or if it has a leak.
– Avoid all contact with the liquid that could be released from the battery.
In case of contact with eyes, wash them thoroughly and seek medical advice.
The liquid spilled from the battery may cause irritation or burns.
USE AND CARE
– Do not use the appliance if its filter(s) are not correctly in place.
– Do not use the appliance to vacuum up water or any other type of liquid.
– Respect the MAX level indicator.
– This appliance is for household use only, not professional or industrial
use.
– This appliance should be stored out of reach of children and/or those with
reduced physical, sensory or mental abilities or those unfamiliar with its
use.
– Use the appliance, its accessories and tools in accordance with these
instructions.
Take working conditions and the job to be carried out into consideration.
Using the appliance for anything other than its intended use can create
hazards.
– Do not operate on areas which contain metal objects such as nails and/or
screws.
– Never vacuum hot or sharp objects (cigarette butts, ash, nails, etc.).
– Do not open the battery(s) under any circumstances whatsoever.
– Do not use the appliance with pets or animals.
– Recharge the battery(s) only with the charger supplied by the manufacturer.
A charger that is suitable for one type of battery may cause explosion or fire
hazard when used with other battery.
– Use the device only with the battery(s) for which it has been specifically
designed. The use of any other battery(s) may cause an explosion or fire
hazard.
SERVICE
– Make sure that the appliance is serviced only by specialist personnel, and
that only original spare parts or accessories are used to replace existing
parts/ accessories.
– Any misuse or failure to follow the instructions for use may be dangerous,
rendering the guarantee and the manufacturer’s liability null and void.
INSTALLATION
– Be sure to remove all packaging material from inside the appliance.
ASSEMBLING THE CHARGER STATION
– The appliance has a wall mounting (O) which should be fix to a wall.
– Fix the wall bracket as you think appropriate, using plugs, screws, and
adhesive.
– Make sure that the bracket is firmly fixed; it should be able to support
twice the weight of the appliance.
– Fit the appliance into its wall mounting.
CHARGING THE BATTERY
– Caution: The new battery does not come completely charged and must be
charged up to the maximum before using the appliance for the first time.
– Charge the battery at room temperature between 4 and 40 °C.
– Plug the charger (P) into the mains and connect the charger to the jack
using the socket on the appliance. The socket is located at the back of the
hand-held vacuum cleaner. (Fig. 1)
– Approximately 3 to 4 hours are needed for a complete charge of the battery.
Never attempt to over-charge the battery (although it is recommended that the
first charge of the battery be of 5 hours in duration).
– While the battery is charging, the pilot light will flash, indicating that
the charger is charging the battery. (C)
– At the end of the time period specified above, remove the battery from the
charger.
– Once the battery is charged, disconnect the charger from the mains supply.
– NB: Do not use the appliance while it is connected to the charger.
INSTRUCTIONS FOR USE
USE
– Turn the appliance on using the on/off switch. (B)
– The ON indicator will light up. (C )
– Select the desired power.
– Press once for ECO speed/twice for TURBO speed.
To use the hand-held vacuum:
– Press the hand-held vacuum extraction button (H) on the brush vacuum’s main
body (E). (Fig. 2)
– Turn the appliance on using the on/off switch. (I)
FITTING AN ACCESSORY TO THE HAND-HELD VACUUM
– Press the hand-held vacuum extraction button (H) on the brush vacuum’s main
body (E). (Fig. 2)
– The hand-held vacuum is designed in such a way that it allows the following
accessories to be fitted: (use the combination that best meets your
requirements). (Fig.3)
– Furniture brush: Equipped with a brush at the end, which brushes the surface
as it is used.
– Crevice nozzle: Specially designed for getting into cracks and difficult
corners.
PARKING POSITION
– This appliance has one parking position for comfortable and straightforward
storage.
FOLDING HANDLE
– This appliance has a folded handle position for easy storage.(Fig.4)
CLEANING
– Disconnect the charger from the mains and let it cool before undertaking any
cleaning task.
– Clean the appliance using a damp cloth with a few drops of detergent and
then dry it.
– Do not use solvents, products with an acid or base pH such as bleach, or
abrasive products to clean the appliance.
– Do not submerge the appliance in water or any other liquid, or place it
under a running tap.
EMPTYING THE DUST BOX
– Empty the dust box when dust is visible though the transparent walls, when
it is full, or when the vacuum cleaner does not work to its full potential.
– Press the hand-held vacuum extraction button (H) on the brush vacuum’s main
body (E). (Fig. 2)
– Disconnect the dust box from the appliance. (Fig. 5)
– Remove the cloth filter and its protector. (Fig. 6)
– Empty the contents into a suitable rubbish container.
– Clean the dust box filter.
– Attach the dust box to the appliance.
– To reassemble, follow the above instructions but in reverse.
CHANGING THE FILTERS
TO REMOVE FILTERS
– Press the hand-held vacuum extraction button (H) on the brush vacuum’s main
body (E). (Fig. 2)
– Disconnect the dust box from the appliance. (Fig 5)
– Remove the cloth filter and its protector. (Fig. 6)
– To reassemble the filter, proceed with the above instructions, in reverse
order.
CLEANING THE ROTARY BRUSH
TO REMOVE THE BRUSH
– Press the button on the bottom of the fitting to the left in order to
release the brush. (Fig. 7)
– Remove the brush and clean.
– To reassemble, follow the above instructions but in reverse.
ANOMALIES AND REPAIR
– Take the appliance to an authorised technical support service if problems
arise.
Do not try to dismantle or repair without assistance, as this may be
dangerous.
ECOLOGY AND RECYCLABILITY OF THE PRODUCT
– The materials of which the packaging of this appliance consists are included
in a collection, classification and recycling system.
Should you wish to dispose of them, use the appropriate public containers for
each type of material.
– The product does not contain concentrations of substances that could be
considered harmful to the environment.
HOW TO REMOVE THE BATTERIES FROM THE INTERIOR OF THE DEVICE
– Caution: It is important that the batteries are fully discharged prior to
removal from the appliance.
– Caution: the appliance must be disconnected from the mains when removing the
batteries.
TO REMOVE THE BATTERIES AT THE END OF THE LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
– Open the top shell of the appliance, after removing the fixing screws with
the help of a screwdriver. (Fig 8)
– Identify the battery wires and cut them. To prevent the risk of short-
circuiting from possible residual power in the battery after cutting each
wire, use insulation tape to protect the tip. (Fig 8)
– Safely remove the battery from its housing.
TECHNICAL DATA
Output: DC 14.8V 1500mAh
Guarantee and service
Our products undergo a strict quality-control process before delivery. If the product has unexpectedly been damaged or developed a defect during production or transport, please return it to the retailer. You can legally make a claim under the guarantee in the following circumstances:
The product is covered by a 2-year guarantee from the date of purchase. During this period, we will repair or replace the product if it is found to be defective due to material or production faults.
Faults caused by incorrect use or handling, faults caused by unauthorised
intervention or repairs, and faults caused by use of non-original parts are
not covered by the guarantee.
Our products undergo a strict quality-control process before delivery. If the
product has unexpectedly been damaged or developed a defect during production
or transport, please return it to the retailer. You can legally make a claim
under the guarantee in the following circumstances:
The product is covered by a 2-year guarantee from the date of purchase. During
this period, we will repair or replace the product if it is found to be
defective due to material or production faults.
Faults caused by incorrect use or handling, faults caused by unauthorised
intervention or repairs, and faults caused by use of non-original parts are
not covered by the guarantee.
Correct disposal
WEEE: DE 18770614
The symbol above and on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other
household or commercial waste at the end of its useful life. The Waste of
Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has been put
in place to recycle products using best available recovery and recycling
techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill. Contact local authorities for
information on the correct disposal of Electrical or Electronic equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>