TopAction B8, B10, B12 Series Cycle Computer User Manual

June 3, 2024
TOPACTION

B8, B10, B12 Series Cycle Computer
User Manual

All clear (initial)

TopAction B8 B10 B12 Series Cycle Computer - fig 15

Data setting (Auto quit after 20’S without any operating)

TopAction B8 B10 B12 Series Cycle Computer

Large display ( When large display , stop auto scan function )

TopAction B8 B10 B12 Series Cycle Computer - fig

Sensor Re – Pairing

TopAction B8 B10 B12 Series Cycle Computer - fig 1.

Speed stop status

TopAction B8 B10 B12 Series Cycle Computer - fig 2TopAction B8 B10 B12 Series Cycle Computer - fig
3

Speed stop status

TopAction B8 B10 B12 Series Cycle Computer - fig
4![TopAction B8 B10 B12 Series Cycle Computer

TopAction B8 B10 B12 Series Cycle Computer - fig 6 Low Battery indictor: Change battery immediately when the symbol appears, after changing battery,the symbol may keep displaying for 1 or 2 minutes,due t o there is a big capacitor inside the computer.“H Gk SE.
TopAction B8 B10 B12 Series Cycle Computer - fig 7 Enter data setting mode when under Speed stop status

Imperial

Turn on Back-light/optional

TopAction B8 B10 B12 Series Cycle Computer - fig 16

Power off

Wheel Circumference MeasurementTopAction B8 B10 B12 Series Cycle
Computer - fig 12

Tire size reference table

Tire Size| Cirumference Number| Tire Size| Cirumference Number| Tire Size| Cirumference Number| Tire Size| Cirumference Number
18 Inch| 1436 mm| 26×1.40| 1995 mm| 28 Inch| 2234 mm| 702,a„.,-| 2110 mm
20 Inch| 1596 mm| 26×1.50| 2030 mm| 28.6 Inch| 2281 mm| 700×200| 2092 mm
22 Inch| 1759 mm| 26×1.75| 2045 mm| 29×2.10| 2324 mm| 700×230| 2112 mm
24×1.75| 1888 mm| 26×1.95| 2099 mm| 29×2.20| 2333 mm| 700x25C| 2124 mm
24 Inch| 1916 mm| 26×2.10| 2133 mm| 29×2.35| 2354 mm| 700x28C| 2136 mm
24×1318| 1942 mm| 27.5 x1.95| 2167mm| | | 700x32C| 2155 mm
| | 27.5 x2.10| 2192mm| | | 700x35C| 2164 mm
| | 27.5 x 2.35| 2229mm| | | 700x38C| 2174 mm

Wireless Installation

TopAction B8 B10 B12 Series Cycle Computer - fig 13TopAction B8 B10 B12 Series Cycle Computer - fig
14

Key function description

TopAction B8 B10 B12 Series Cycle Computer - fig 11

  1. Mode KEY
    M : means hold Mode key for 1’s
    M : means hold Mode key for 3’s
    M : means digital flash
    All clear ( AC ) the computer :
    Press ( S )to All clear (initial) the cycle computer Hold 63’s to check and reset EEPROM (This operating for factory only )
    Press ( M ) for enter data setting mode

  2. Data setting mode :
    Press( M ) for increase setting digital
    Press(S) for change to next setting digital
    Hold(S) 1’S for change to next setting mode
    Hold (S)3’S for quit data setting mode

  3. General mode :
    Press(M) for change function display
    Hold (M) 3’S for reset trip data
    Hold (S) 3’S for enter data setting mode
    Press(L) for Lock/Unlock touch key

Warning / Caution

  1. Always pay attention to the road condition
  2. Before the first time you use the computer, and after you change the battery, please do ALL Clear
  3. Do not leave the computer under high temperature or direct sunlight for long
  4. Do not disassemble the computer
  5. Please check the position of magnet and sensor periodically
  6. Do not use alcohol, thinner or benzine to clean the computer and accessories

Trouble Shooting

Problem| Check Point| Solution
No display| 1.The battery power
2.The installation of battery| 1.Change battery
2.The positive pole (+) should face the battery cap
(No display of speed) or  (displaying wrong data)| 1.Computer is still in the setting mode
2.The distance between magnet and sensor
3.The position of sensor and computer
4.The setting of tire size
5.Check the battery of sensor
6.Interference nearby| 1.Finish the setting and leave the setting mode
2.3. Please refer to the setup manual
4.Please refer to the installation manual
5.Change the battery
6.Stay away from the interference
The computer does not work properly| | Do All Clear and then process the setting again
The screen turns black| The computer is under high temperature for long| Move the computer to cool place and it will work properly soon
The reaction of computer is slow| The temperature is below 0°C(32°F)| Put the computer above 0°C(32°F) for a while and it will work properly
Limited Warranty: (computer and sensor only)
One year from the date you purchase the computer

FUNCTION

Function| Specification| B8 / B8W| B10 / B1OW| B12 / B12W
---|---|---|---|---
Current Speed| 0.0-99.9 Kph / 0.0-62.0 mph| •| •| •
Average Speed| 0.0-99.9 Kph / 0.0-62.0 mph| •| •| •
Maximum Speed| 0.0-99.9 Kph / 0.0-62.0 mph| •| •| •
Trip Distance| 0-999.99 Km / 0-999.99 mile| •| •| •
Odometer| 0-999999 Km / 0-999999 mile| •| •| •
Riding Time| 0:00:00- 99:59:59| •| •| •
Total Riding Time| 0:00- 9999:59| | | •
Speed Pacer| Compare with Average Speed| | •| •
12/24 Hours Clock| 1:00- 12:59 / 0:00-23:59| •| •| •
Calory consumption| 0-9999.99 Kcal| | •| •
Total Calory consumption| 0-999999 Kcal| | | •
Temperature| -10-60°C/14-140°F| •| •| •

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals