Lenco CR-650BK DAB+FM Clock Radio with Bluetooth and Wireless Charging User Manual

CR-650BK DAB+FM Clock Radio with Bluetooth and Wireless Charging
User Manual

User manual – DAB+/FM clock radio with Bluetooth and wireless charging

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in  moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings.
   High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or  liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit  and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all  electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause  interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other  warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:
    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can  lead to death.
    Keep new and used batteries away from children.
    If the battery compartment does not close securely, stop using the product and keep it away from children.
    If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Power supply adaptor
Use only the power supply listed in the user instructions

Manufacture: DongguanDongsong Electronic Co., Ltd. Address: No.19, Xintian Street, BaizhoubianVillage,
East District, Dongguan, Guangdong, P.R. China
Value and precision
Model Identifier| DYS818-050200W-K
Input voltage| 100-240V
Input AC frequency| 50/60 Hz
Output voltage| 5.0 V
Output current| 2.0 A
Output power| 10.0 W
Average active efficiency| 81.%
Efficiency at low load (10%)| —
No load Power consumption| 0.06W

WARNING: When participating in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Controls and Indicator

Product Front

Product Top

23: Power ON/OFF button and Play mode

Listening to DAB Radio

1. Plug the mains power and then press and hold the button to power on the unit. The unit will automatically enter into the DAB mode.
2. Press the button to choose the DAB mode and perform auto scan function.
3. During the scan the display will show “Scanning ………” together with a slide bar that indicates the progress of the scan and the number stations that have been found  so far.
4. Once the scan has finished, the unit will select the first alphanumerically found station.
5. Press the /button to enter station list.
6. When you find a station that you would like to listen to, press the enter button to confirm.

NOTE: If no stations are found after auto scan, Press the enter button to enter into “Station Scan”, press the to select “Full Scan” or “Manual Scan” modes for stations.

DAB Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has finished, the first alphanumerically found station will be automatically selected.

1. To activate full scan, Hold the button to enter into the station scan, then Press the/button to select “Full Scan”, and press the enter button to confirm. the display will  show “Scanning / together with a slide bar that indicates the progress of the scan and the number stations that have been found so far.
2. All the stations that have been found will be stored automatically. Press the /button to choose the station you prefer and Press the enter button to confirm.

DAB Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has finished, the first alphanumerically found station will be automatically selected.

1. To activate full scan, Hold the button to enter into the station scan, then Press the / button to select “Full Scan”, and press the enter button to confirm. the display will  show “Scanning ………” together with a slide bar that indicates the progress of the scan and the number stations that have been found so far.
2. All the stations that have been found will be stored automatically. Press the / button to choose the station you prefer and Press the enter button to confirm.

DAB Manual Tune
As well as the full scan function, you can manually tune the radio. This can help if you know your radio has missed stations. You will need to know which multiples the  missing radio station is in.

1. Press and hold the button and enter into “Station Scan”, Press the /button to select the Manual mode, press the enter button to confirm.
2. Press the / button to cycle through the DAB channels, which are number from 5A to13F.
3. After your desired channel number is selected, press the enter button to enter the current multiplex, it will now display the multiplex and below you will see the signal strength.
4. You will not see any new radio stations or hearing anything while in manual tune. To find the newly tuned in stations search through the station list.

Preset/Memory Setting

Store the current radio station as a preset

1. Hold the to enter the station memory function
2. Press the / button to select the preset number of your choice and press the enter button to store the station.
   You can also do a quick save the current station to one of the 5 top preset buttons by longpressing one of the preset buttons.

Note: “This product has a bluetooth reception function, you can’t transmit any bluetooth sound with it: this means that you can only receive wirelessly a bluetooth sound  signal from an external source like a smartphone.”

Listening to USB music

1. Plug a (FAT-32 formatted) USB memory stick at the back of the unit.
2. Hold the to power on the unit, press the to choose the USB mode.
3. Press the to adjust the volume.
4. Press the to play/pause.
5. Press the / button to choose the previous song/next song.

Listening to Micro SD Card music

1. Plug the Micro SD Card (FAT-32 formatted) into the TF/microSD slot at the back
2. Hold the  to power on the unit, press the to choose the Micro SD card mode
3. Press the to adjust the volume
4. Press the to play/pause
5. Press the / button to choose the previous song/next song

Note: Please turn up the volume of your connected Bluetooth device and CR-650

Listening to Micro SD Card music

1. Plug the Micro SD Card (FAT-32 formatted) into the TF/microSD slot at the back
2. Hold the to power on the unit, press the to choose the Micro SD card mode
3. Press the to adjust the volume
4. Press the to play/pause
5. Press the / button to choose the previous song/next song

SLEEP Setting

1. When powered on, press the button to activate the SLEEP function
2. Press the button to choose the SLEEP time 15/30/45/60/75/90 and press enter Or wait a few seconds to use the selected sleep time.
   The unit will power off, when the selected sleep time is over

Note:

1. If you want to check the remaining sleep time, short press the Sleep button once when the sleep timer is active
2. If you want to reset the Sleep timer, press the Sleep button twice when the sleep timer is active

NAP Setting

1. When the device is powered off, press the button to active the NAP function
2. Press the button to choose the nap time 15/30/45/60/75/90 and press enter or wait a few seconds to use the selected nap time.
3. The unit will power off when the chosen nap time is over.

Note:

1. If you want to check the remaining nap time, short press the nap button once when the nap time is active
2. If you want to reset the nap timer, press the nap button twice when the nap timer is active.

Preset/Memory Setting

1. In FM/DAB mode, hold the to enter the station memory function
2. Press the /button to choose the station number and press the enter button to store the station.
3. In FM/DAB mode, press the to enter the memory station list
4. Press the /button to choose the station you like.

Backlight Setting

1. Set the backlight in the menu or press the SNOOZE/DIMMER button setting the backlight level of the display

Inserting/replacing batteries:

1. Remove the battery compartment cover located at the bottom of the device.
2. Insert 4 new AA/LR6 batteries (not included) into the battery compartment and ensure that the polarity of each battery corresponds to the symbols (+ and -) in the  battery compartment.
3. Close the battery compartment again.

Please note:

• Inserting batteries into the device is optional. The batteries are only for memorizing time and the date settings when the event of a power failure.
• Without the batteries, the date and time will be reset to the factory default values in the case of a power failure.
• The other settings including the alarm settings and the Radio preset stations will always be memorized in the event of a power failure.

Trouble shooting guide

the device’s AC adapter into an electrical outlet.
| The electrical outlet is not supplied with electricity.| Plug another device into the same electrical outlet to perform a cross test
No sound| The volume is set to the minimum| Adjust the volume by pressing the volume button.
Bad FM reception| The antenna is not fully extended.| Fully extend the antenna.
| There is interference from nearby electrical devices (microwave oven, TV, etc.)| Move your clock radio further away from possible sources of interference.
Bad DAB reception| The antenna is not fully extended| Fully extend the antenna.
| Your area is not covered by DAB.| Check the DAB coverage in your area.
| No playback from a USB drive or microSD card| The audio format is not supported by your clock radio| Ensure that your audio has been correctly saved in the removable medium in MP3 format.
---|---|---|---
| | | Ensure that the USB drive or microSD card is correctly connected to or inserted into the USB port or the microSD card slot on the back of your clock radio.
| A Bluetooth connection with another device
cannot be established.| Your Bluetooth playback device is not in pairing mode.| Consult the user manual for your Bluetooth playback device and try again.
| | | Make sure your clock radio and your
Bluetooth playback device are less than 8 metres apart and no walls or other electronic devices are blocking or interfering with the Bluetooth transmission.
| No sound when playing from Bluetooth
connected device| | Turn up the volume from the clock and the Bluetooth device.
| The phone placed on the wireless charging pad is not charging.| | – Ensure your clock radio is powered by the AC adapter.
– Make sure your phone is Qi enabled (equipped with the Qi* wireless charging technology).
– Remove the case/protective cover from your phone.
– Restart your phone.
– Ensure you have enabled wireless charging in
your phone settings, if this option is there. – Update your phone’s system software.
– Contact your phone’s manufacturer for
advice.
Technical Specifications|
---|---
Input power (power adapter)| AC 100-240V ~ 50/60Hz
Music output power| 2 x 5 W RMS + passive
DAB Frequency range| 174.928 – 239.200 MHz
FM Frequency range| 87.5 – 108 MHz
Bluetooth Frequency range:| 2402 – 2480MHz
Bluetooth Version:| V5.0
Power consumption| Max 13W
Power consumption (standby)| < 1W
Operating Temperature| 0°C-35°C
Operating position| Horizontal
Dimensions of the unit| 170x 170 x 74mm
Weight| 0,9KG (without batteries)

This product is suited for this purpose within all EU Countries.
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your  local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non- official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ  slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements  may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of  the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you  will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Commaxx B.V. Wiebachstraat 37, 6466NG Kerkrade, The Netherlands, declares that this
product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466NG Kerkrade, The Netherlands

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>