ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless Sensing User Guide

June 3, 2024
Analog Devices

ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless

Sensing

POWER SOLUTIONS FOR PRECISION TECHNOLOGY SIGNAL CHAINS

PRECISION CURRENT SENSING
Generic Signal Chains for Current Measurement Contactless Sensing – Hall 5V Output

PRECISION CURRENT SENSING CATALOG

GENERIC SIGNAL CHAINS FOR

CURRENT MEASUREMENT

| ****

Input Voltage

| 5V
---|---|---
12V
24V
APPENDIX| Parts Guide
---|---
Power Requirements

USER GUIDE

This document is interactive. You can click on any underlined text to navigate through the document.

For the table of contents and resources

ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless
Sensing-FIG4

For the individual pages

APPENDIX

ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless
Sensing-FIG6 ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless
Sensing-FIG7 ANALOG DEVICES Generic Signal Chains for Current Measurement Contactless
Sensing-FIG8

PART # DESCRIPTION
ADP7118 20 V, 200

mA, Low Noise, CMOS LDO Linear Regulator
ADP225| Dual, 300 mA Output, Low Noise, High PSRR Voltage Regulators, Adj. Output: 0.5 V to 5 V
LT3023| Dual 100mA, Low Dropout, Low Noise, Micropower Regulator
LT8338| 40V, 1.2A Micropower Synchronous Boost Converter with Pass-Thru
LT8604| High Efficiency 42V/120mA Synchronous Buck

POWER REQUIREMENTS


PARAMETER

| STAGES| Amplifier| Filter| ADC| Reference
---|---|---|---|---|---
Part #| ADA4807-1| –| AD4000| ADR4550
Pin| +VS| -VS| | VDD| VIO| IN
Supply Voltage| V| 5| 0| –| 1.8| 3.3| 7 (or 12)
Supply Current| mA| 0.95| 0.95| –| 5.42| 0.16| 0.95
PSRR| dB| 72 (1MHz)| 47 (1MHz)| –| 75 (200kHz)| 60 (1MHz)

  • Note 1: The supply currents indicated are the maximum quiescent current of the supply rails. For overall full load or short circuit current specifications, refer to the datasheets of the signal chain components.
  • Note 2: The supply voltages indicated are the values for typical applications.
  • Note 3: Consult the corresponding datasheets for details on: (1) power supply rejection ratio (PSRR) and (2) power dissipation.
  • Note 4: The actual supply current requirement shall be multiplied depending on the number of channels on the signal chain.

©2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Analog Devices User Manuals

Related Manuals