YBS Insulation Airtec 2 in 1 Reflective Bubble Insulation Instructions
- June 3, 2024
- YBS Insulation
Table of Contents
YBS Insulation Airtec 2 in 1 Reflective Bubble
Airtec is a CE Marked, thin, flexible, easy-to-install reflective aluminium foil bubble insulation membrane, suitable for almost any application including roofs, walls, floors, motor homes, boats, and cellars, the opportunities are massive.
Available in 3 variations Airtec Single, Airtec Double, and Airtec Double
Bubble offer a cost-effective solution, helping to reduce energy usage and
save you money. The core bubble profile of the product offers thermal
benefits, this is achieved by trapping air within its bubble structure while
creating low emissivity air spaces from its foil-faced outer layers, enhancing
its overall thermal capabilities.
-
Thermally Efficient
Total R-Value up to 1.53 m²K/W, equivalent to 70mm of Mineral Wool. -
Quick & Easy
Thin, flexible, and easy to install saving time and money on project completion time. -
Cost Effective
Up to 66% heat loss reduction, saving money on your energy bills. -
Certified
CE Marked and Building Control Compliant.
Instructions
- R-Value up to 1.53 m²K/W, equivalent to 70mm of Mineral Wool Insulation.
- Built-in airtight vapour control layer to prevent the passage of moisture, reducing the risk of condensation.
- Reduces energy usage, saving you money.
- Effective radiant barrier – warmer in the winter and cooler in the summer.
- Available in 3 variations.
- Up to 68% reduction in heat loss, saving you money on your energy bills.
- Suitable for Roofs, Walls, Floors, and many more applications.
- Zero fibers remove the need for PPE.
- CE marked to industry standards.
- Manufactured in Britain.
Installation
- Measure the application and calculate the required amount of insulation needed to complete your project.
- Cut the insulation to the required length, using a suitable pair of scissors or craft knife.
- Staple the insulation at minimum 300mm intervals, maintaining a 50mm overlap between layers.
- Tape and seal the perimeter and overlaps using YBS Aluminium Foil Tape, creating an airtight vapour control barrier.
Technical Properties
| Thermal Attribute | Single | Double | Double Bubble |
|---|---|---|---|
| Core R-Value | 0.125m2K/W | 0.140m2K/W | 0.200m2K/W |
| Roof R-Value (including cavities) | 0.575m2K/W | 1.04m2K/W | 1.1m2K/W |
| Wall R-Value (including cavities) | 0.79m2K/W | 1.47m2K/W | 1.53m2K/W |
| Emission coefficients of surfaces | 0.05 | 0.05 | 0.05 |
| Attribute | Single | Double | Double Bubble |
| Flammability | Class F | Class F | Class F |
| Water vapour resistance | >600MNs/g | >600MNs/g | >600MNs/g |
| Attribute | Single | Double | Double Bubble |
| --- | --- | --- | --- |
| Layers | 3 | 3 | 5 |
| Thickness | 3.5mm | 3.5mm | 7mm |
| Weight | 140g/m2 | 140g/m2 | 307g/m2 |
| Dimension | Roll Sizes (other sizes available) | ||
| Width | 1.2m | 1.5m | 1.5m |
| Length | 25m | 25m | 50m |
| Area (m2) | 30m2 | 37.5m2 | 75m2 |
For detailed technical information please visit our website www.ybsinsulation.com. Or contact a member of the technical team on 01909 726 025 or [email protected].
01909 726 025 |
[email protected]
01909 721 662 | [email protected] |
www.ybsinsulation.com.