YBS Insulation ThermaWrap Self Adhesive Pet House Insulation Instructions
- June 3, 2024
- YBS Insulation
Table of Contents
YBS Insulation ThermaWrap Self Adhesive Pet House
REFLECTIVE ALUMINIUM FOIL INSULATING LAYER FOR INSULATING YOUR PET’S LIVING SPACE. KEEPS YOUR PETS LIVING ENVIROMENT WARMER IN THE WINTER AND COOLER IN THE SUMMER.
INSTALLATION
General Fixing:
Firstly, measure your intended application and calculate the amount of
insulation required.
Before applying ThermaWrap self-adhesive pet insulation, ensure the surface of is clean and free from any debris or dirt (it is advised to clean the surface before installation).
- Step 1 Starting at the bottom, roll the insulation out across the area, once in position peel the easy peel backing from the self-adhesive tape and apply pressure to the surface (this will ensure the tape bonds to the surface), once in position cut the material at the end. Any window handles, doors, etc should be cut around to ensure access.
- Step 2 Apply the next layer of insulation following the instructions shown in step 1, however, this time ensure there is an overlap of 50mm.
Cutting:
Thermawrap can be cut using a craft knife or sharp pair of scissors.
Tape Fixing:
Clean the surface of all loose debris, position the insulation, remove the
easy peel backing and apply pressure to the back of the insulation.
Disclaimer
Thermawrap (a brand of Yorkshire Building Services (Whitwell) Ltd) does not accept any liability for damage caused to any animal through the digestion of this product.
- With built-in self-adhesive tape.
- Thermawrap product range.
For more information about our full range visit: ybsinsulation.com/diy.
For technical support give us a call or send us an email. 01909 726 025 | Technical@ybsinsulation.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>