WX1000HH 100 Channel UHF Wireless Handheld Microphone System User Guide
- June 3, 2024
- Wireless
Table of Contents
100 Channel UHF Wireless
Handheld Microphone
System User Guide
WX1000HH 100 Channel UHF Wireless Handheld Microphone System
Introduction
Enjoy the easy and exciting performance that the WX1000HH provides for your
next performance. CAD Audio has been creating valued product since 1931 and
prides itself on developing and supporting the live performer. Our concept was
straightforward – develop a high value wireless microphone system that can
cope with today’s challenging RF environment that is both easy to operate and
exciting to use.
The WX1000HH is a Frequency Agile UHF Wireless Handheld System which operates
in the 510 – 570MHz frequency band and features 100 channels for optimum
clarity of signal. Auto-scan and IR sync functions make set up and channel-
changing a breeze. Enjoy up to 12 hours of run time using two AA batteries,
with a battery level indicator on both the transmitter and receiver, so you’ll
know when you need to replace them. All metal construction and included rack
mounting hardware help ensure your quipment will stand up to even the
toughest conditions.
The WX1000HH includes the following features:
- Frequency Agile Design (100 switchable frequencies)
- Use up to 20 systems at the same time
- Up to 295′ (90m) range between transmitter and receiver
- Rugged, all metal construction
- Auto scan finds the optimal frequency setting
- IR sync wirelessly matches transmitter and receiver frequencies
- Transmitter features battery life indicator
- Transmitter utilizes 2 AA Batteries with >12 Hrs of operation
- Rack mounting hardware and antenna relocation kit included
- 2 Year Warranty.
Operating Instructions
-
Power on/off
-
Volume Up: short press ( ****)
-
Volume Down: short press ( ****)
-
Synchronizing: short press the middle “SET” button, the system will enter into its pairing mode Bring the transmitter 2″ (5cm) close to the “IR indicator” on the
left of the front panel, and the receiver and transmitter will be synchronized -
Frequency Setting Manually: Long press ( ) to enter the manual setting mode. Press ( ) and ( ****) to select channel 0 – 99
-
Frequency Automatic Scanning Feature: Long press ( ****) to enter auto-scanning mode, and the system will scan for the best possible frequency to eliminate radio interference
-
Lock/unlock Setting: press ( )( ) at the same time, the “LOCK SIGN” on the LCD screen will display or conceal
Receiver RX1000 (Front)
- Antenna
- IR node
- RF peak indicator
- AF peak indicator
- Channel display
- Frequency display
- Mute indicator
- Set Frequency Channel up/down
- Power on/off
Receiver RX1000 (Rear)
- Antenna jack
- XLR- type balanced output
- 1/4″ unbalanced output
- DC power jack (use included supply)
Specifications WX1000
Frequency Response …………… 30Hz – 18KHz
Frequency Range ……………… 510MHz – 570MHz
Frequency Mode ……………………….. FM
Channels ……………………………….. 100
Receiver Sensitivity …………………………. <108dBm
Signal-to-Noise Ratio ……………………………..>85dB
Harmonic Distortion ………………………………..<0.5%
Dynamic Range …………………………………… >100dB
Delay ………………………………………………………<3ms
Operating Range ………….. 278′ (85m) in open area, 196′ (60m) indoors
Audio Output ……….. XLR balanced output, 1/4″ (6.3mm) unbalanced jack
Antenna Plug ……………………………….1x TNC, 50ohms
Power Requirements ………………………………..DC 12V, 1A
Dimensions ………………………. 16″ x 12.1″ x 2.8″ (40.5cm x 30.7cm x 7cm)
Weight ……………………………………….3.3Lbs (1.5kg)
Handheld TX1000 Transmitter
- Battery life indicator
- LCD display
- Power Switch
- Battery compartment
Specifications TX1000
Operating Principle …………………………… Dynamic
Polar Pattern ………………………………….Cardioid
Frequency Response ………………………. 30Hz – 18KHz
Max SPL ……………………………………………….129dB
Dynamic Range ……………………………. 60Hz – 17KHz
RF Output ……………………………………10mW
Power Requirements ……………………..2x AA batteries 1.5V
Battery Life …………………………..>12 hours
Individuals with cardiac pacemakers and other similar medical devices should
consult with their physician before using any RF devices. Though the output
level of this wireless system is below 50 milliwatts, the proximity of the
transmitter to the implant device could pose a threat.
As with any wireless product, environmental conditions can reduce or in some
cases prohibit a successful connection between the transmitter and the
receiver.
This device complies with Part 15 of the FCC Rules. Most users of CAD Audio
wireless products in the United States do not need a license for operation.
However, the rules for unlicensed operation state that this device must not
operate in excess of 50 milliwatts and it must not cause harmful interference
to other wireless devices, and must accept interference received from other
devices.
Wireless products meeting CAD factory standards adhere to these rules. The FCC
reserves the right to change these rules at any time. For more information
contact the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s
wireless microphone website at:
www.fcc.gov/cgb/wirelessmicrophones
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
CAD Audio
6573 Cochran Rd., Bldg. I Solon, OH 44139 U.S.A.
Tel: 440-349-4900
Fax: 440-248-4904
Sales: 800-762-9266
cadaudio.com
Distributed Worldwide by American Music and Sound
925 Broadbeck Drive, Suite 220
Newbury Park, CA 91320 U.S.A.
Tel: 800-431-2609
Fax: 800-431-3129
©2022 CAD Audio Rev00 0822
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>