Quark Wooden Pegboard Wall Shelf Installation Guide
- June 3, 2024
- Quark
Table of Contents
Quark Wooden Pegboard Wall Shelf Installation Guide
Insert screws
Insert the screws into the holes located at the four corners of the board.
Use the Torx 10 key provided.
Place the board
Place the board on the wall in the desired location.
Use a level to ensure verticality or horizontality.
Mark
The board held on the wall in the desired position.
Hit each screw head with a hammer to mark the wall the final position of
the screws.
Drill
Place the board on the ground, then drill each marked point with a Ø 6 mm. drill.
Then insert the nylon plugs into the holes using a hammer.
Set
Then screw the board to the wall.
The final assembly can be facilitated by pressing the screws as far as
possible before placing them in front of the dowels.
No need to over tighten.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>