think TANK V2.0 Pro StreetWalker Camera Backpack Instructions
- June 3, 2024
- think tank
Table of Contents
StreetWalker ® Backpack V2.0 Instructions
For more information please visit:
www.thinktankphoto.com
V2.0 Pro StreetWalker Camera Backpack
ADJUSTABLE STERNUM STRAP
The sternum strap adjusts up and down along the blue rails on the backpack straps.
REMOVABLE WAISTBELT
The included waistbelt is removable by unthreading the webbing through the buckle.
ATTACH A MODULAR BELT
Remove the StreetWalker waistbelt. Pass a Think Tank Photo Pro Speed Belt™ or Thin Skin™ Belt (sold separately) into place for additional comfort or to be used with the Think Tank Modular Belt system. *Belt pass through available on the StreetWalker HD and StreetWalker Pro only.
TRIPOD OR MONOPOD ATTACHMENT
Step 1 : Locate the two adjustable tripod straps provided with the
StreetWalker. Step 2: To open the Double Gatekeeper buckle, press the gate
inwards then depress the top plastic bar in order to release the gate. Step
3: Slide the opened Double Gatekeeper buckle through the webbing loop and
close it by depressing the top plastic bar and securing the gate.
Step 4: Attach the tripod straps to the webbing loops at the top and near the bottom of the StreetWalker.
CARRYING A TRIPOD
Step1: Insert two tripod legs into the outside lower pocket.
Step 2: Unlock the adjustable strap, then pull the strap tight around the top of the tripod. Tighten the lower strap around the exposed leg for additional stability.
USING THE TRIPOD CUP
Step 1: Locate the blue tab with the tripod icon near the bottom of the
StreetWalker Pro and StreetWalker HardDrive.
Step 2: Pull tab downward to deploy the tripod cup. Use the included tripod straps to secure the tripod onto the backpack.
1105 N. Dutton Avenue, Suite C, Santa Rosa, CA 95401 USA
Phone #: 1.707.527.0101 F
FAX #: 1.707.527.0808
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>