think tank V3 Pixel Racing Harness Instructions
- June 4, 2024
- think tank
Table of Contents
think tank V3 Pixel Racing Harness
Instruction
Front Buckles
Connect the shoulder straps to both sides of the belt towards the front of the body.
ROTATE
Wrap the ends of the shoulder strap around the belt and secure the double-
gatekeeper buckle so the belt slides easily through the loop.
LOCK
Wrap the shoulder strap behind and under the belt, then insert the strap
through the horizontal webbing on the outside of the belt. Secure the double-
gatekeeper buckle. 
Open the double-gatekeeper buckle by (1) pressing the metal gate inwards then
(2) squeezing the top plastic bar to release the gate. To close, press the top
plastic bar down and flip the metal gate over the hook.
Rear Buckle
The rear strap runs down the middle of your back and attaches to the center of
the belt through the webbing loop marked by the Think Tank logo. Adjust the
ladder lock buckle to fit.
Wrap the center strap behind and under the belt, then insert it through the
horizontal webbing on the outside of the belt. Secure the double-gatekeeper
buckle to lock the strap in place.