IMFsoft IMF-EV03 Charging Cable User Manual
- June 3, 2024
- IMFsoft
Table of Contents
IMFsoft IMF-EV03 Charging Cable
Specification
| IMF – EV03 (A/T) | IMF – EV04 (A/T) | IMF – EV0S (A/T) | |
|---|---|---|---|
| EV plug | Type 2 (IEC 62196) | Type 2 (IEC 62196) | Type 2 (IEC 62196) |
| Grid plug | Schuko E/F (3p) | CEE 3x32A (5p) | CEE 3x32A (5p) |
| Rated voltage | 230V (1F) | 230V (1F) | 400V (3F) |
| Current option | 6-8-10-13-16 A | 6-8-10-13-16-20-25-32 A | 6-8-10-13-16 A |
| Power | 3.7 kW | 7.4 kW | 11 kW |
| Cable length | 5 m [3, 5, 7]* | 5 m [3, 5, 7]* | 5 m [3, 5, 7]* |
| Variant | A (Basic)/T (Tesla)* | A (Basic)/T (Tesla)* | A (Basic)/T (Tesla)* |
| Circuit breaker | Typ A (AC), 30mA | Typ B (AC/DC), 30mA | Typ B (AC/DC) , 30mA |
| Voltage range | 90-270V[5 -60Hz] | 90-270V[50-60Hz] | 160-470V[50-60Hz] |
| Temper. range | -30 to +50°C | -30 to +50°C | -30 to +50°C |
| IP cover | IP 54 | IP 54 | I 54 |
| UV resistance | YES | YES | YES |
| Weight | 1.6 kg/ 5 m | 2.3 kg/ 5 m | 1.9 kg/ 5 m |
- In stock is a cable length of 5 m, other variants are to order within 14 days.
- The T-Tesla variant includes a remote control for the charging socket cover.
IMF charging cables EV03, EV04 and EV05 are designed for charging electric vehicles equipped with Mennekes Type 2 connectors from a standard Schuko or CEE 3x32A socket.
The key advantage of this design is the integration of the control and monitoring elements directly into the connectors, so there is no longer a large and heavy housing on the cable. Easy handling, small dimensions, and low weight allow the cable to be used not only at home, in a company or in a hotel car park, but also on the road. The investment in an expensive Wallbox device is thus completely unnecessary.
GET STARTED
GET STARTED
I.|
Plug in the cable into an electrical plug.
II.| When inserted into an electrical plug, the blue LED will inform you of the value of the set current according to the number of flashes.
A steady blue LED indicates readiness for charging.
III.| By the button, it is possible to change the charging current.
Immediately after pressing the button, the blue LED goes out and after 5 s it will gradually inform you about the new value of the charging current. The button is not released until the desired current value is displayed and stored in memory.
IV.|
After connecting to the car, the blue LED flashes to indicate that charging is in progress.
A steady blue LED indicates that the vehicle battery is fully charged.
X.| The charging cable is equipped with an integrated RCD.
The protector is used to protect people and equipment when an electrical circuit is disconnected when a power leak is detected.
The red LED indicates that charging has been disconnected to detect a leakage current through the RCD.
Charging Options
| Charging option|
Current [A]
| |
Power [kW]
---|---|---|---|---
LED| Current| 1F| 2F| 3F
1| 6 A| 1.4 kW| 2.8 kW| 4.1 kW
2| 8 A| 1.8 kW| 3.7 kW| 5.5 kW
3| 10 A| 2.3 kW| 4.6 kW| 6.9 kW
4| 13 A| 3.0 kW| 6.0 kW| 9.0 kW
S| 16 A| 3.7 kW| 7.4 kW| 11.0 kW
6| 20 A| 4.6 kW| 9.2 kW| 13.8 kW
7| 25 A| 5.8 kW| 11.5 kW| 17.3 kW
8| 32 A| 7.4 kW| 14.7 kW| 22.0 kW
LIMITED WARRANTY
Warranty valid for 24 months The Warranty does not cover mechanical damage, unauthorized modifications, improper use, flooding, lightning or other natural phenomena.
www.imf.cz
info@imf.cz
+420 596 611 977.