HUASHENG SM-2112 2.0 CH Soundbar Speaker User Manual

HUASHENG SM-2112 2.0 CH Soundbar Speaker

TV Bottom

HDMI (ARC)

The Soundbar can be connected to your TV or receiver via an ARC enabled HDMI port. ARC stands for “Audio Return Channel” and has been available on most TV’s, receivers, and soundbars since the HDMI 1.4 standard was introduced in 2009. The ARC protocol offers two-way communication between devices over a single HDMI connection. Simply put, this means that you can use the HDMI ARC port (if available) as an input and an audio output. Check your specific device’s manual to see if features an HDMIARC port.

1. Power-on the Soundbar by connecting it to an AC power source. Press the Power/Standby button on the side of the Soundbar and continue to press it until the LÉD display shows the letters “HDHI”. You can also press the “M” button on the remote control to reach HDMI mode.
2. Connect a standard HDMI cable to your sound bar and connect the other end to your TV’s HDMIARC port. Most TV’s feature ARC output over only one HDMI port. This port should be labeled as HDMI ARC. If the HDMl ports aren’t clearly labeled, you can check the TV manual, which should indicate which HDMI port to use and if the ARC feature needs to be manually activated.
   Please note: the Soundbar must be plugged into an ARC enabled HDMI port. It will not work with a standard HDMI port. Check your specific device’s manual to see if it features an HDMI ARC port.

Optical

1. Connect unit to audio device via optical cable(please remove the protect cap on the top of optical cable before use)
2. Select the unit optical mode via unit button or remote control
3. Operate the audio device directly for playback features.

Noted:
If there no sound is coming out of the unit, please check and make sure the audio setting of your source player(e.g.DVD Player, Game player,TV) is set to PCM With optical output.

USB

1. Power-on the Soundbar by connecting it to an AC power source and ressing the Power/Standby button.
2. Plug in your USB flash drive. The unit will automatically read the files and begin playing music.
3. You can control playback from the Soundbar (volume) or the remote control (volume, tracks, play/pause, stop).
4. To exit USB mode you can remove your USB flash drive or press the Power/Standby button on the side of the Soundbar to select another mode. To return to USB mode plug in a USB flash drive or press the Power/Stand-by button until the LED display shows the letters “USB”. You can also press the “M” button on the remote control to exit from or return to USB mode.
   Please note: the Soundbar supports USB drives up to 32Gb and the MP3 file format. The USB port does not support charging.

AUX

1. Connect your audio device to the unit via the audio cable
2. Press model button repeatedly on the unit or remote control to select the “AUX” Model
3. Operate the audio device directly for playback features.

Bluetooth
You can listen to tracks from a media device if connected to the unit via Bluetooth wireless technology

1. During on mode, press “M button repeatedly on the unit or the remote control to select Bluetooth mode.
2. Activate your Bluetooth enabled device and select the search mode: “BT-SOUNĎBAR” will appear on your Bluetooth device list.
3. Select “BT-SOUNDBAR” from the pairing list and connect it, if need password, please enter”0000″

Botton on Soundbar

Long Press for power on and power off, short press for difference mode
: Press for play of pause the music. at Bluetooth mode, long time to disconnect Bluetooth.
Long Press for volume+ short press for next song.
Long press for volume short press for previous song.

Remote Control

:Press for power on/off.
:Short press for difference mode long press for mute.
Press for play or pause music.(at Bluetooth and USB/TF Mode).
:Press for next song at Bluetooth and USB/TF Mode).
:Press for previous song (at Bluetooth and USB/TF Mode).
:Press for volume up.
:Press for volume down.
: Press for Bass up.
: Press for Bass down.
: Press for treble up.
:Press for treble down.
: Press for difference EQ. The

6 EQ modes are displaved on the LED display as: “CUT” Country music, “POP” Pop, “ROC” Rock, “CLA” Classical, “JAZ” Jazz, “NOR” Normal

Warranty

Thanks for using LINKFOR product, all LINKFOR product comes with warranty of 18 months from the day of purchase, if you need any support, please feel free to contact us

Contact:

Email: [email protected]

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
   This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operationof the device
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>