DORAGYM S10 Charging Lamp User Manual
- June 3, 2024
- DORAGYM
Table of Contents
DORAGYM S10 Charging Lamp User Manual
Model: S10
Our products are insured by the Pacific insurance company
In case of emergency or major property loss, please call the insurance number
within 48 hours, and keep the site for the insurance company to investigate.
Insurance phone: +86 95500
PACKING LIST
- Main body
- DC Adapter
- Instructions
PARTS INSTRUCTION
- infrared induction
- Power indicator light
- IOS seconds timing button
- 30S seconds timiing button
- 60S seconds timiing button
- 60S high temperature mode
- 99S low temperature mode
- Power indicator light
- Charger connection switch
- Switch
PRODUCT INSTRUCTION
- Designed for professional nail experts.
Cure UV gel/Builder gel/LED gel perfectly.
CHARGING INSTRUCTIONS
-
Connect the charger to the power supply and the
machine starts charging. -
When the charging indicator is red, the indicator is on, and the four blue indicators are power indicator. When charging for 2 hours, the blue indicator light IS on and not blinking, Indicating that the battery is fully
-
Charging time 2 hours, sustainable use for 2 hours.(Can be used while charging)
-
Built-in lithium-ion battery, rechargeable cycle using 800-1000 times.
OPERATION INSTRUCTION
- Turn on the switch and the lamp begin to wait for work.
- Automatic sensor mode: hand into the lamp, nail lamp began to work. Hand out, the lamp stop working. Maximum working hours 99S.
- Manual mode: press the time you need, set the button for the IOS / 30S / 60S (normal mode) countdown to work. Press button 99S (low temperature mode) to staff working clockwise. In the absence of your set time, the hand will not stop working until the time is complete. If you need to stop working halfway, press the time key to stop.
- Intelligent double power output. Press the 60S (high temperature mode) button, the countdown to work. Used to dry is not easy to dry the nail polish, I-JV glue.
- When the charging lamp is stopped for 10 minutes, the lamp automatically sleeps. At this time, it is in the state of power protection.state. The display stops showing the time, and it will wake up by pressing the 99 second key when it is used again.
TECHNICAL INSTRUCTION
- Power: 48 w
- Charger output: 12.6VIA
- Size: 210 200 x 95mm
- Wave length: 365+405+61 C)nm
CAUTIONS
- Please read the instruction careful before use the lamp.
- Please use the correct voltage.
- Avoid liquid enter the machine to avoid malfunction.
- Please don’t use the machine when the timing button is fault.
- Unplug the adapter if don’t use the machine for long time.
- Don’t use the machine when the adapter is fault to avoid any potential risk.
- Please don’t keep the machine lighting exceed 600 minutes continuously.
- Please wear protective glasses and radiation protection suits when using.
Unique design for protecting the back of the hand please rest assured that extends Into the whole hand use,gel curing effect more perfect
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>