TRIO R62263131 LED Ceiling or wall Lamp Cloudy 1x29W Instructions
- June 3, 2024
- Trio
Table of Contents
TRIO R62263131 LED Ceiling or wall Lamp Cloudy 1x29W
WARNING
Before assembling, please read carefully the safety instructions
INSTALLATION INSTRUCTIONS
REMOTE DESCRIPTIONS
Description of how the light works without the remote control unit
When the light is switched on from the main/wall switch, the lighting scenario
most recently set in memory will be used. There is no RGB colour memorisation.
Description of how the light works with the remote control unit
The most recently configured light setting is always displayed (memory effect)
To reset the memory settings, press the OFF button twice. The synchronous
control of several lights is not foreseen.
Operation of the remote control
- Mode: RGB
- Step: red light
- Step: green light
- Step: blue light
- Step: Slow RGB colour change
- Night light Brightness 5% 3000K
- Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages.
- Pressing the button permanently results in the maximum or minimum brightness being reached.
- On
- Off
Set up remote control
Press and hold key 5 and switch on light using wall switch. After 5 seconds the light will flash once, signallising successful coding
Reset
Switch on lamp via mail/wall switch,Within 3 seconds, press the “ON” key (5) five times, the lamps flash six times.
Declaration of Conformity
Hereby, Reality Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.trio-leuchten.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>