IOIO OC 500YA IP Camera Instructions
- June 3, 2024
- IOIO
Table of Contents
IOIO OC 500YA IP Camera
Read the operating manual thoroughly and observe all the information contained when using the device. Keep the operating manual close by for future reference.
Intended Use
The OC 500YA IP camera, subsequently referred to simply as the camera, is
designed to perform video surveillance (CCTV) of indoor and outdoor areas by
day and night.
When installing and selecting the area of application of the camera, pay
attention to the personal rights of third-parties and that the respective,
applicable local laws and regulations are not violated. A condition for
complying with the intended use is that the equipment is installed correctly
and the information in the manual is observed and maintained. Any use other
than that described in the Section “Intended Use” is considered unintended
use. The camera is not suitable for use in wet rooms or potentially explosive
areas.
Monitoring of third-parties is not permitted without having obtained the respective, explicit authorisation and could have legal consequences. Unauthorised modifications or reconstructions are not permitted. The camera is only intended for private use.
Safety Instructions
Avoid any personal injury by paying attention to the following information!
Warning! Risk of electric shock! Never open or attempt to repair the
device or its components. Never touch bare contacts with metallic objects.
Never plug-in or unplug the power adapter when your hands are wet.
Warning! Risk of suffocation! Children can swallow small parts, packaging
and protective foils. Keep the product and packaging out of reach of children!
Warning! Risk of fatal or personal injury! When monitoring babies or
small children, ensure that the device and cable are out of reach of the
child.
Important! Protect the device from damp, dust, liquids, chemicals,
vapours, heat and direct sunlight. The device is not waterproof so keep it
dry.
Important! Only use original accessories. Only connect accessories
approved by the manufacturer to the device.
Package Contents
Check the package contents of the camera carefully before putting the camera into operation. If anything is missing or damaged, please contact our Service Department.
- IP camera OC 500YA
- Antenna
- Power adapter
- Assembly material: screws, dowels, mounting adapter, hex key
- Operating manual
System Requirements
You need a web-capable smartphone which has the Android (from 4.1) or iOS
(from 8) operating system and the latest version of the Tuya Smart app.
To put the camera into operation for the first time it must be connected to
the Tuya Smart app and the wifi of your router. The camera and
smartphone/tablet PC must be registered on the same wifi system. Observe the
following points when selecting the assembly location.
- The camera must be within the range of the wireless home network (wifi).
- It is essential to observe local laws and regulations!
Features
The camera’s ability to compile pictures and sound means it has many areas of application in the fields of surveillance and communication. All the functions can also be controlled via remote access using the Tuya Smart app on your smartphone/tablet PC.
-
Motion detection
The camera detects movements automatically. On detecting a movement , you receive a push notification on your smartphone/tablet PC and the camera automatically takes a photo. This function can be switched on/off in the Tuya Smart app. -
Remote access
You can enjoy remote access to the camera via the Tuya Smart app. You can then watch live pictures or a video recording and control other functions. -
Intercom function
You can use the Tuya Smart app to listen or speak directly into the room being monitored. -
Shared access
You can use the Tuya Smart app to share access to your camera and allow trusted persons to watch the live images from the camera and control functions.
General View
The figures illustrate the camera in detail.
- Infrared sensor
- Camera lens
- Wifi antenna
- Device mounting bracket
- Connection cable
- Reset button
- Socket (wifi)
- Power adapter connection
- MicroSD card slot
- Cover / Loudspeaker
- Screws (cover)
Inserting a MicroSD Memory Card (Option)
If you want to save photos or videos locally on the camera, you can insert a microSD memory card (not contained in the package supplied) with up to 64 GB memory space in the camera.
- Loosen the two screws 11 in the cover 10 using an appropriate screwdriver.
- Remove the cover.
- Insert the microSD memory card in the microSD card slot 9 . Pay attention that the microSD memory card is aligned correctly. The microSD card slot 9 ensures correct alignment.
- The microSD memory card latches audibly in place.
Connecting the Camera
The camera only works when the power adapter is connected.
- Connect the power adapter to the power adapter connection 8 on the camera.
- Connect the power adapter to a properly installed power socket. The camera is switched on automatically and is ready to connect as soon as the corresponding announcement is issued from the loudspeaker 10 in the camera.
- Set the camera down on a flat, level surface.
- Use the hex key to align the camera properly. If you will not be using the camera for a longer period, disconnect it from the power supply.
Connecting the Camera – Wireless (Wifi)
The camera can be connected to the home network (wifi system) in wireless
form. In this case, you need the wifi antenna supplied.
Pay attention that the camera is within range of the home network (wifi
system).
-
Screw the wifi antenna 3 supplied to the camera.
Connecting the Camera – Cable Connection (LAN) -
The camera can be connected to the home network (LAN) by a cable. In this case, you need a network cable.
-
Connect an appropriate network cable (not contained in the package supplied) to the socket (LAN) 7 on the connection cable 5 on the camera.
Installing the Tuya Smart App
To define further settings on the camera and a connection to your home network (wifi or LAN), follow the instructions provided by the Tuya Smart app.
-
Download the Tuya Smart app from the App Store or Google Play Store or scan this QR code.
Pay attention that the camera and your smartphone/tablet PC are within range of the same home network (wifi). -
Open the Tuya Smart app on the smartphone/tablet PC and add a new device.
-
Use the Video surveillance area to select the Surveillance camera device type.
-
Follow the subsequent instructions provided by the app. When a connection has been established, you hear an audible confirmation from the loudspeaker 10 in the camera.
-
Use the hex key to align the camera properly. In the case of queries and problems related to the Tuya Smart app, please contact www.go-europe.com.
Installing the Camera
If so required, you can use the device base 4 to assemble the camera on a wall or ceiling. Disconnect all the cable connections before beginning with the installation work. Ensure that there is a free and easily accessible power socket at the installation location.
-
Unplug the power adapter from the network connection 8 on the connection cable 5 on the camera.
-
Unplug the network cable from the socket (LAN) 7 on the connection cable 5 of the camera. When using the wireless option, pay attention that the installation location of the camera is within the operating range of the home network (wifi system).
-
Ensure that there are no electric cables, gas or water pipes near the installation location.
Warning! Risk of fatal injury from electric shock or gas explosion! During installation, pay attention to the possibility of electrical cables and gas pipes running in the walls. Pay attention that you do not damage electric cables or gas pipes. If in doubt, contact a specialist! -
Measure the distance between the drill holes in the device base 4 .
-
Mark the drill holes at the distance measured on the wall at the installation location.
-
Drill the three holes.
-
Insert the appropriate dowels contained in the assembly material supplied. We recommend the use of special dowels according to the properties of the mounting surface.
-
Feed the connection cable 5 through the cable duct on the device base 4 .
-
Fix the camera in place with three screws.
-
Align the camera optimally using the Tuya Smart app.
Resetting the Camera
You can reset the camera settings. As a result, the connection to the home
network and Tuya Smart app are disconnected.
- Press and hold the Reset 6 button for approx. 5 seconds.
- A corresponding announcement is issued from the loudspeaker in the camera. After resetting, the camera is switched on automatically and is ready to connect as soon as the corresponding announcement is issued from the loudspeaker 10 in the camera.
Cleaning and Maintenance
- Unplug the power adapter from the power adapter connection 8 on the camera.
- Clean the surface with a dry or slightly moistened cloth. The device does not require any special maintenance. Repairs to the device may only be completed by technical specialists.
Disposal
The adjacent symbol indicates that electrical and electronic apparatus and
batteries no longer required must be disposed of separate from domestic waste
in accordance with legal directives. Dispose of the device at a collection
point provided by your local waste authorities. Packaging materials must be
disposed of according to local regulations. The device and packaging materials
can be recycled; sort them for disposal to simplify waste management. The
Triman logo is only relevant for France.
The device and the packaging material can be recycled, so sort them prior to disposal for better waste management. Contact your local authorities for information on the various options available to ensure correct disposal. Observe the following identifications of the packaging materials: (a) numbers, (b) abbreviations and (c) materials which have the following significance: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials and (d) type of packaging. The logo is only applicable to Italy.
Warranty
Dear Customer,
We are delighted that you have decided to purchase this product. If it does
not work as you expect it to or it is defective, please contact
the sales outlet from which you purchased the product. Simplified EU
Declaration of Conformity We, GO Europe GmbH, Zum Kraftwerk 1, 45527
Hattingen,
DEUTSCHLAND, declare in sole responsibility, that the product complies with
the EU Directives: 2014/53/EU and 2011/65/EU. The full EU Declaration of
Conformity is available online at the following website or by scanning the QR
code: http://productip.com/?f=128407
Technical Data
- Weight Approx. 353 g
- Dimensions (L × W × H) 59 × 195 × 59 mm
- Camera angle 110°
- Permissible ambient conditions -10 °C to +50 °C at 10% – 80% rel. humidity
- Transmission frequency 2.4 GHz (wifi)
- Transmission power 15.63 dBm
- Wifi IEEE 802.11 b/g/n
- Encryption WEP, WPA, WPA2
- LAN Ethernet (RJ45), 10/100 MBit/s
- Power supply Input voltage: 100 – 240 VAC, 50/60 Hz, 0.65 A
- Output voltage: 12 VDC, 2 A
- Camera resolution 1080 p (Full HD)
- Infrared sensor Yes, with IR Cut Filter
- Memory card MicroSD up to 64 GB
- Ports MicroUSB port
- Microphone Yes
- Loudspeaker Yes
- Audio and video Intercom function
- App (iOS/Android) Tuya Smart
- Protection class IP65 + dustproof/splashproof
Manufacturer
GO Europe GmbH
Zum Kraftwerk 1, 45527 Hattingen
Germany
www.go-europe.com
Documents / Resources
| IOIO
OC 500YA IP
Camera
[pdf] Instructions
OC 500YA IP Camera, OC 500YA, OC 500YA Camera, IP Camera, Camera
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>