BetterMe Band 2 Ultimate Health and Fitness Tracker Instructions
- September 23, 2024
- BetterMe
Table of Contents
BetterMe Band 2 Ultimate Health and Fitness Tracker Instructions
Instruction
Device parameters
CPU: REALTEK8762D Series
Screen type : AMOLED 0.95 inch
Working temperature: 23°F–113°F (-5°C–45°C)
Water resistance: IP68
Operate way : Full touch
Charging method: Magnetic
Battery type: Polymer lithium ion battery
Data transfer: Bluetooth 5.1 sync
Device requirement: Android 9.0/above; iOS 15.0/above
Main features
This device detects and measures the following:
Daily steps and walking distance
Sleep
Heart rate
Heart Rate Variability
How to use
- Tap the screen to wake the band.
- Swipe the screen left or right to switch among features.
- Tap the touch button to go to a previous screen.
- Long press the touch button on the main screen to change the band face.
- Turning ON/OFF
- Turn ON: long press the touch button.
- Turn OFF: In Settings, tap Power Off, then confirm turning off the band.
Charging
- Remove the band from your wrist.
- Plug the charging cable into the USB С port on your computer, a USB C wall charger, or another charging device.
- Align the pins on the charging cable with the golden pins on the back of the BetterMeBand, and the cable will attach magnetically.
- When the band vibrates gently and displays the charging indicator, you’ll knowit’s charging.
WARNING: Use a charger with a rated output voltage of 5V, a rated output current of 1Aor above, or a computer USB С port. Do not use a charging cable that is not approved or supplied by BetterMe. Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the BetterMe Band or other property. Do not wear the BetterMe Band while charging it. Do not charge the device whileit is wet.
Connecting to a phone
Pair your BetterMe Band with a phone in just a few minutes:
- Download the BetterMe app by scanning the QR code on its box (iOS 15.0/above, Android 9.0/above).
- Create or log in to your account.
- Turn on Bluetooth on your phone.
- Bring your band close to the phone and follow the onscreen instructions to connect.
- Once connected, the band will start tracking your daily activities and sleep quality.
Basic functions
-
The device is equipped with a variety of sensors that monitor your condition during
workouts, rest, and sleep. You can measure heart rate and record data for further analysis. -
The device automatically monitors the number of steps and walking distance. Find thedataby swiping to the activity page.
-
There’s a detector monitoring your sleep at night. You can swipe to the sleep analysis pageto see the data. Temporarily, the device doesn’t support daytime naps and abnormal
nighttime behavior monitoring (work shifts, etc.). -
The band can measure your heart rate. Swipe to it on your band to start automatic
measurement. -
HRV, or heart rate variability, is a way to measure how your body adapts to life’s
challenges. Changing time intervals between your heartbeats help us understand your body’sresponses to stress. BetterMe Band automatically tracks your HRV throughout the day. Head to the BetterMeappto view your data. -
On the device display, you can see the basic data and measurements. Make sure to connect to the app every day to see the detailed statistics and progress. The metrics dashboard is available only with a paid subscription in the BetterMe app.
When measuring heart rate and Heart Rate Variability, make sure the photoelectric sensor onthe back of the device touches your wrist neatly. If it’s too tight or too loose, you may get falsereadings. Heart Rate measurement works best when you’re relaxed. The band will automatically monitor your heart rate at set intervals.
NOTES
-
When measuring heart rate, make sure the photoelectric sensor on the back of thedevice touches your wrist neatly. If it’s too tight or too loose, you may get false readings.
-
Heart Rate Indicator works best when you’re relaxed. The band will automatically
monitor your heart rate at set intervals. -
The band is not a medical device. The condition measurement data is given for
reference. -
The sleep detection technology is based on your movement. The data is presentedonly for reference and may be inconclusive. Quiet lying down may be detected as sleeping.
-
The device is made from PC+ABS and the straps are made from liquid silicon similar
to that used in many sports watches.
Water Resistance
- BetterMe Band is rated with IP68 Water Resistance, which means that it is splash-resistant and resistant to submersion up to a maximum depth of 1.5m underwater for up to 30 minutesin freshwater. We do not recommend using the band in salt or chlorinated water. Don’t usethe band while taking a hot shower/bath, sauna, diving, surfing, swimming in the pool, or during any other activities that involve interaction with high-temperature/moisture environments.
- The water resistance capabilities may get worse over time.
Important safety information:
read before use to reduce the risk of injury, discomfort, property damage,
including damageto BetterMe Band, any connected devices, and other potential
hazards.
Skin irritations: Prolonged contact may cause skin irritation or allergies in some users. Toreduce irritation, follow 4 simple wear and care tip
- Keep it clean.
- Keep it dry.
- Don’t wear it too tight.
- Give your wrist a rest by removing the band for an hour after extended wear. If younotice any skin irritation, remove your device.
Medical conditions: Consult your doctor before use if you have any preexisting conditions that might be affected by your use of the device. A small percentage of users may experienceheadaches, seizures, blackouts, eye strain, fatigue or dry eyes that are triggered by visual stimuli, such as flashing lights or bright patterns, or the use of electronics with displays. Those symptoms can be experienced by people who have never previously experienced such issues. If you have a history of seizures, blackouts, epilepsy, a medical condition, or experience discomfort that you believe could be affected by the BetterMe Band, consult witha doctor before using your device.
Stop using your BetterMe Band immediately and contact a doctor if you experience any symptoms that you believe could be caused or affected by your device (for example, headaches, blackouts, or seizures). If you feel soreness, tingling, numbness, burning or stiffness in your hands or wrists while or after wearing the device, please immediately discontinue use.
Interference with medical devices: BetterMe Band and some charging accessories containmagnets as well as components and/or radios that emit electromagnetic fields. These magnets and electromagnetic fields might interfere with medical devices. In case you haveapacemaker, implantable cardioverter defibrillator, or other implanted device, consult your healthcare provider or a manufacturer of the implanted device before using the BetterMeBand. Utilizing the band together with the implanted device may have an adverse effect onthe last and as a consequence – your health.
Not a medical device: BetterMe Band is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease. The accuracy of the products and services offered by BetterMe and its affiliates is not intended to be equivalent to medical devices or scientific measurement devices.
Choking hazard: BetterMe Band is not a toy. The device with accessories attaches somesmall parts, please keep the device away from the children to avoid children swallowingsmall parts which may cause an injury or create a choking hazard.
Distractions: Do not check calls or other notifications, GPS, or other applications on theBetterMe Band display while driving or in other situations where distractions could be hazardous. Always be aware of your surroundings when using BetterMe products and services.
Musculoskeletal disorders: Repetitive activities, such as tapping, or swiping on the screenof your BetterMe Band, may cause discomfort in your fingers, hands, wrists, arms, shoulders, or other parts of your body and may worsen preexisting conditions, such as carpal tunnel syndrome. If you experience any discomfort from such activities, stop using your BetterMeBand and consult with your doctor.
Radio frequency interference: Observe signs and notices that prohibit or restrict the useof electronic devices or wireless technology such as Bluetooth. BetterMe Band is designed, tested, and manufactured to comply with regulations governing radio frequency emissions, such emissions from the BetterMe Band can negatively affect the operation of other electronicequipment, causing them to malfunction. Turn off the band when use is prohibited, suchaswhile traveling in aircraft, or when asked to do so by authorities.
Battery and repairing: Polymer lithium ion battery is used in this
device. If these guidelinesarenot followed, batteries may experience a
shortened life span or may present a risk of damage to the device, fire,
chemical burn, electrolyte leak, or injury. Do not disassemble, modify,
remanufacture, puncture or damage the device or batteries. Donot remove or
attempt to remove the non-user-replaceable battery. Doing so will void
thewarranty and can result in a safety hazard. Do not use the BetterMe Band
with a damagedenclosure, a cracked display or some other form of physical
damage. Heat exposure and explosive conditions: Do not expose the device or
its battery to fire, explosion, extremely high or low temperatures or other
hazards. In particular do not useor
store the device or its accessories in dusty, smoky, damp, or dirty
environments, or near
magnetic fields. Keep it away from heat sources and out of direct sunlight. Do
not leave your BetterMe Band inside a vehicle, on a car dashboard, window
sill, near aheating vent, or behind glass exposed to direct sunlight or strong
ultraviolet light for extendedperiods. Remove your BetterMe Band immediately
if it feels warm or hot. Environmental hazard: Substances in the BetterMe Band
and its battery may harmthe
environment or cause injury if handled and disposed improperly. For proper
disposal andrecycling see the Disposal and Recycling Information section.
CLEANING AND CARE
Keep the BetterMe Band clean and dry. Regularly clean your band and wrist
—especiallyafter working out, sweating or washing your hands. Dry your
BetterMe Band thoroughly if it isexposed to fresh water.
Clean the band if it comes in contact with anything that may cause stains or
other damage, such as dirt or sand, makeup, ink, soap, detergent, acids or
acidic foods, or comes in contact with liquids other than freshwater,
including those that may lead to skin irritation such as sweat, salt water,
soapy water, pool water, perfume, insect repellent, lotions, sunscreen, oil,
adhesive remover, hair dye, or solvents. The BetterMe Band colors may vary or
fade over time.
How to clean BetterMe Band:
-
Remove the BetterMe Band and turn it off before cleaning
-
Wipe the band clean with a nonabrasive, lint-free cloth. If necessary, you can also lightlydampen the cloth with fresh water. Do not use hand soap, body soap, dish soap, hand
sanitizers, cleaning wipes, household cleaners or other similar cleaning products to cleantheband or device, as those are difficult to remove and could get trapped beneath the bandandirritate your skin. Instead, only use fresh water and a soap-free cleanser to clean the band. Furthermore, to minimize the potential for damage to your device and the chance for skinirritation, avoid any direct contact with sunscreen or insect repellent sprays. Always removeyour device while applying these types of creams or sprays. -
Dry BetterMe Band with a nonabrasive, lint-free cloth.
To avoid safety hazards or damage to the BetterMe Band, follow these guidelines:
- Do not clean BetterMe Band while it’s charging.
- Do not dry BetterMe Band using any external heat source (for example, a hair dryer).
- Do not use cleaning products, ultrasonic cleaners, or compressed air when cleaning your Better Me Band.
DISPOSAL AND RECYCLING INFORMATION
The symbol on the BetterMe Band or its packaging signifies that this device must be disposedseparately from ordinary household wastes at its end of life because it contains a battery andis electronic equipment.
For information about where to recycle your device, please contact your local waste management authority.
Do not dispose of your BetterMe Band with household waste. Disposal of the packagingandthe BetterMe Band should be done in accordance with local regulations. Batteries are not tobe disposed of in municipal waste streams and require separate collection.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may causeundesired operation.
Note: This device has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This devicegenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can bedetermined by turning the device off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver isconnected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’sauthority to operate the device. The device has been evaluated to meet general RF exposure requirements.
This device complies with FCC’s RF radiation exposure limits set forth for an uncontrolledenvironment. This device and its antenna(s) must not be co-located or conjunction with anyother antenna or transmitter.
LIMITED WARRANTY
For information on terms and period of the BetterMe Band limited warranty and
other
information related to the limited warranty, please visit
https://store.betterme.world/bandlimited-warranty
Model: BetterMe Band 2
Distributed by BetterMe affiliates. For more information please see
https://quiz.betterme.world/corporate-information.
© 2024 BetterMe Limited & its affiliates. All rights reserved.
Website: betterme.world
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>