Elibrary BAYACCDOR1 Access Door Installation Guide
- September 21, 2024
- elibrary
Table of Contents
Elibrary BAYACCDOR1 Access Door
Product Usage Instructions
General Information:
This access door is designed for single packaged units as described in the
“Used With” section above.
Installation Steps:
- Check for any shipping damage and report it immediately.
- Remove the access panel labeled COIL ACCESS and retain screws.
- Use the screws removed in Step 2 to attach the right side of the door.
- Open the door using the two knobs on the left side.
- Use additional screws removed in Step 2 to attach the left side of the door.
- Use the remaining screws removed in Step 2 to attach the door to the indoor coil flashing.
- Shut the door and turn the knobs to secure.
FAQ
Q: Are the doors backward compatible with BAYFLTR101 or BAYFLTR201?
A: No, the doors are not backward compatible with BAYFLTR101 or BAYFLTR201.
Specifications
- Model: BAYACCDOR1 (for units DC, TC, WC, YC, A5PA, A5PG, A5PH*018-036)
- Used With: BAYFLTR101B
NOTE: indicates an alphanumeric character
WARNING: HAZARDOUS VOLTAGE – DISCONNECT POWER BEFORE SERVICING ALL phases of this installation must comply with NATIONAL, STATE, AND LOCAL CODES
IMPORTANT: This Document is customer property and is to remain with this unit. Please return to the service information pack upon completion of work.
TYPICAL ACCESS DOOR INSTALLATION
General
Follow these instructions to install the BAYACCDOR1 or BAYACCDOR2 (DOOR1 or DOOR2) in single packaged units described in the Used With a section at the top.
- Check for any shipping damage, and if any, report it to the carrier immediately.
- Remove the access panel labeled COIL ACCESS and retain screws.
- Use the screws removed in Step 2 to attach the right side and top of DOOR1/2.
- Open the door using two knobs on the left side of the door.
- Use additional screws removed in Step 2 to attach the left side of DOOR1/2.
- Use the remaining screws removed in Step 2 to attach DOOR1/2 to the indoor coil flashing.
- Shut the door and turn the knobs to secure.
Note: Doors are not backward compatible with BAYFLTR101 or BAYFLTR201.
About Trane and American Standard Heating and Air Conditioning Trane and American Standard create comfortable, energy-efficient indoor environments for residential applications.
For more information, please visit www.trane.com or www.americanstandardair.com
The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices. © 2024 18-HE82D1-2B-EN 31 May 2024 Supersedes 18-HE82D1-2A-EN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>