Sig Sauer ECHOMQ25 Thermal Imaging Monocular Instruction Manual
- September 20, 2024
- SIG SAUER
Table of Contents
ECHOMQ25 Thermal Imaging Monocular
Product Information
Specifications:
-
Model: [Insert Model Number]
-
Size: [Insert Dimensions]
-
Weight: [Insert Weight]
-
Power Source: [Insert Power Source
Information] -
RF Exposure Compliance: General RF exposure
requirement met
Product Usage Instructions
1. Safety Precautions:
Before using the device, carefully read and follow all safety
instructions provided in the user manual.
2. Powering On:
To power on the device, locate the power button and press it for
a few seconds until the indicator lights up.
3. Functionality:
Explore the various functions of the device by referring to the
user manual. Familiarize yourself with the settings and features
available.
4. Maintenance:
Regularly clean the device using a soft, dry cloth. Avoid using
harsh chemicals or solvents that may damage the product.
5. Troubleshooting:
If you encounter any issues with the device, refer to the
troubleshooting section of the user manual for guidance on common
problems and solutions.
Frequently Asked Questions (FAQ):
Q: Is the device FCC compliant?
A: Yes, the device has been evaluated to meet general RF
exposure requirements as per FCC regulations.
Q: How do I reset the device?
A: To reset the device, locate the reset button or follow the
reset instructions provided in the user manual.
Q: Can I use the device while charging?
A: It is recommended to refer to the user manual to determine if
it is safe to use the device while charging.
FCC Caution.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
§ 15.21 Information to user. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
§ 15.105 Information to the user. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between
the equipment and receiver. -Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. -Consult the dealer or
an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.