DiamaPro SVX2-M Industrial Vacuum Owner’s Manual
- September 21, 2024
- DiamaPro
Table of Contents
- SVX2-M Industrial Vacuum
- Specifications
- Product Usage Instructions
- 1. Introduction
- 2. Warranty
- 3. Unintended Use
- 4. Machine Data
- 5. Performance Tolerances
- 6. Safety Provisions
- 7. Installation
- 8. Periodical Maintenance
- 9. Product Disposal
- 10. Description
- 11. Mounting of Parts
- 12. Using the Vacuum Cleaner
SVX2-M Industrial Vacuum
“`html
Specifications
- Model: SVX2-M
- Type: Industrial Vacuum
- Warranty: 1 or 2 years (depending on the component)
- Manufacturer: DiamaPro Systems
- Website: www.diamaprosystems.com
Product Usage Instructions
1. Introduction
It is necessary for authorized personnel and machine operators
to read and understand the manual before using the machine.
2. Warranty
DiamaPro SVX model vacuums are warranted to be free from
manufacturing defects for a period of one or two years. For
complete warranty information, call
800-622-2048.
3. Unintended Use
Avoid using improper length cords and be aware that
environmental factors can affect machine performance.
4. Machine Data
Check the technical data plate and safety devices before using
the machine. Register the machine within 30 days of purchase for
warranty coverage.
5. Performance Tolerances
To qualify for warranty coverage, register your DiamaPro SVX
vacuum online at www.DiamaProSystems.com. For warranty service,
send a written request to DiamaPro Systems P.O. Box 19946
Charlotte, NC, 28219.
6. Safety Provisions
Follow safety guidelines provided in the manual to ensure safe
operation of the vacuum.
7. Installation
Ensure proper delivery and handling of the vacuum. Check
electrical connections and use appropriate power sources.
8. Periodical Maintenance
Before turning on/off daily, verify the machine’s location
matches the technical data plate. Perform maintenance every 50
hours of operation as specified in the manual.
9. Product Disposal
Dispose of the machine and accessories according to
state/country legislation to protect the environment and health.
Separate and recycle components as needed.
10. Description
The vacuum includes features such as suction unit, on-off
switch, accessories connection, wheels with brake, filter cleaning
lever, bag holder, collection bag, strap locks bag, access to
primary filter, access to secondary filter.
11. Mounting of Parts
Follow instructions in the manual for proper mounting of parts
on the vacuum cleaner.
12. Using the Vacuum Cleaner
Connect the flexible hose to desired accessories using the
camlock mounted on the filter chamber. Refer to the accessories
sheet for detailed instructions.
FAQ
Q: How often should I perform maintenance on the vacuum?
A: Maintenance should be performed daily before turning on/off
and every 50 hours of operation as specified in the manual.
Q: What should I do if my machine is not working properly?
A: Check for any damages or shocks that may have occurred during
transport. Contact customer support for assistance if needed.
“`
OWNER’S MANUAL
SVX2-M
INDUSTRIAL VACUUM
USER & MAINTENANCE BOOK
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARRANTY REGISTRATION CARD
Form must be completed and submitted within 30 days from the date of purchase.
Customer Information First and Last Name
Company Name
Address
City
State Zip Code
Phone Number
Machine Information Machine Type Serial #
Machine Model Purchase Date (dd/mm/yy)
DiamaPro® Systems 3343 Peachtree Road NE
Suite 145 #24 Atlanta, GA 30326
470-977-2323 n www.diamaprosystems.com
n info@diamaprosystems.com
1. INTRODUCTION
4. MACHINE DATA
This user and maintenance manual will set out the guidelines and procedures
that must be followed by those operating this equipment in order to guarantee:
· Operators’ safety · Correct use of the machine · Optimum performance
IT IS NECESSARY THAT THE AUTHORIZED PERSONNEL AND MACHINE OPERATOR HAVE READ
AND UNDERSTOOD THE MANUAL BEFORE USING THE MACHINE.
Due to the importance of this information, we recommend that the operator: ·
Always keeps this manual close at hand for easy consultation · Keeps the
manual in a safe place in order to prevent loss or damage · Asks the
manufacturer/supplier for a replacement copy in case of loss or
damage · Supplies this manual and the manufacturer’s details together with the
machine if it is sold to a third party
The manufacturer reserves the right to update its products and manuals and is
not required to provide updated versions of the them.
2. WARRANTY
DiamaPro SVX model vacuums are warranted to be free from manufacturing defects
in normal service for a period of one or two years from the date of purchase
by the original consumer purchaser. Component manufacturers offer separate
warranty periods. Call 800-622-2048 for
complete information.
4.1 TECHNICAL DATA PLATE
Every DiamaPro machine carries a registration plate showing essential details
that are necessary when contacting the supplier/manufacturer for advice,
suggestions or information on spare parts. The following details are included
on the plate: · Manufacturer · Model · Supply voltage · Installed rated power
· CE symbol (built in compliance with Machinery Directive 2006/42/EEC)
4.2 SAFETY DEVICE
The vacuum cleaner has been manufactured in compliance with all legal
standards for the operator’s safety. · All metal components are grounded to
eliminate shock or electrostatic
discharge, including the flexible suction hose that is properly grounded. Also
in this regard the choice of a suitable flexible suction hose allows to
eliminate this risk on the hose length that goes from the use area to the
vacuum cleaner. · The brakes fitted onto the anterior pivoting casters safely
fix the machine in its place of use where there may be a risk of movement due
to uneven floor surfaces or other particular working conditions.
BEFORE USING THE MACHINE CHECK THAT THE MACHINE HAS NOT SUFFERED ANY SHOCKS OR
DAMAGES DURING THE TRANSPORT THAT CAN AFFECT THE OPERATION OF THE ABOVE
DEVICES
5. PERFORMANCE TOLERANCES
DiamaPro System’s obligation under this warranty is expressly limited to the
replacement of such part or parts as inspection shall disclose to have been
defective. This warranty does not apply to defects caused by damage,
unreasonable use, faulty repairs made by others or defects caused by failure
to provide reasonable maintenance. Further, the warranty is void if the
product, or any of its components, is altered or modified by the consumer or
if the product is used in an inappropriate manner or with equipment not
recommended by the manufacturer. Wear items are not covered under warranty:
examples include: belts, wheels, casters, bearings, cart wheels, filters, wear
pads, spark plugs, hoses, wands and squeegees, motors, etc.
To qualify for warranty coverage, DiamaPro SVX vacuums must be registered
within 30 days of purchase. Registration can be completed online at
www.DiamaProSystems.com
To request your warranty service you MUST send a written request to: DiamaPro
Systems P.O. Box 19946 Charlotte, NC, 28219
including the manufacturing details that can be found on a plate fitted inside
your machine together with a copy of the invoice.
The warranty is invalid under the following conditions: · Improper use of the
machine or total or partial failure to comply with the
contents of this manual · Any part of the vacuum cleaner is altered or
modified in any way · Incorrect electrical installation · If the laws in the
country of use are not respected · Inadequate maintenance · The machine has
not undergone routine maintenance as specified in this
manual · Use of spare parts that are not produced by DiamaPro or not
specifically
indicated for the model in use · Partial or total failure to comply with the
instructions given in this manual
3. UNINTENDED USE
· Do not use the machine for sucking up liquid material · Do not use the
machine or expose the machine to water, rain, or rain
like environments · Do not use the machine with improper extension cords or
extension
cords of improper length
The performance of the machine may vary based upon environmental factors such
as temperature, air pressure, humidity, etc.
6. SAFETY PROVISIONS
· Carefully read the instructions in this manual before starting, using,
servicing or operating the vacuum cleaner
· Check that the vacuum cleaner hasn’t been damaged in any way · Never turn on
the machine if it is faulty or if you suspect it is faulty · Check that the
switch isn’t worn or damaged · Do not approach the suction intake of the
machine with unfastened or
broken garments that could easily be sucked into the machine · Check that the
filters are present and efficient · Make sure that the filters are installed
correctly and in full working order,
always observing the regulations in force in the workplace · Do not carry out
repairs without the manufacturer’s authorization · Never use gasoline,
solvents or other flammable liquids for cleaning; only
proper detergents should be used for cleaning · Never move the machine by
pulling the power cable or flexible hose · Never direct the opening of the
machine or the flexible tube towards
people or animals · Protect the machine from the rain · Check that the machine
is connected to a power source with the correct
voltage indicated on the registration plate · Make sure that the power cable
has no wear or damage. If replacing
the cable, always replace it with another of the same specifications as the
original one: cables that are not approved or of inferior quality may overheat
and cause serious injury to the user · Make sure that the machine is connected
to an appropriate power source in full working order (check the presence of a
fully functional grounding socket) · Repairs must only be carried out by
authorized personnel and only when the machine is turned off and disconnected
from the power source · Never allow unauthorized personnel to use the machine
· Make sure that all safety devices are in full working order before turning
on the machine · Never cover the vacuum cleaner during use
3
7. INSTALLATION
10. DESCRIPTION
7.1 DELIVERY AND HANDLING
All machines are carefully tested and checked by DiamaPro before delivery. The
machine is transported inside a protective box or wrapped in a protective film
that allows the courier to see the item during transport and is securely fixed
to a pallet. If any part of the machine is not intact or has been damaged
during transport, file an immediate complaint with the courier. Parts that
have been damaged or broken due to incorrect transport or handling of the
machine will not be recognized by the manufacturer’s warranty. The machine
must be lifted and moved using a forklift truck in accordance with the
relevant safety regulations in force in the workplace
7.2 CHECK THE PROPER ELECTRICAL CONNECTION
Connect the industrial plug to the power cable and connect the plug to a
socket that has the same amp rating and is protected by a line-isolating
switch.
9
5
3 8
6
10 2 1
7
8. PERIODICAL MAINTENANCE
Maintenance and cleaning operations must ALWAYS be carried out when the vacuum
is turned off and disconnected from the power source. No particular measures
must be taken for the maintenance, cleaning or lubrication of the suction
unit. However, it is important to remember that correct use and servicing are
essential if the safety and efficiency of the vacuum are to be guaranteed. To
ensure regular and constant operation and to prevent the warranty from
becoming void, always use genuine DiamaPro spare parts when repairs are
needed.
8.1 BEFORE TURNING ON AND TURNING OFF EVERY DAY
· Visually check that the suction hose has not been damaged in any way (it
must not be damaged, torn, crushed)
· Check that the electrical switches are in full working order and are not
damaged in any way
· Check that the suction hose has not been damaged in any way · Check that the
motor head is correctly positioned on the filter chamber
and that the latter is correctly placed on the main barrel · If the vacuum
cleaner is moved, ensure that the power voltage of the play
in this new location corresponds to the one on the technical data plate
4
1. SUCTION UNIT 2. ON-OFF SWITCH 3. ACCESSORIES CONNECTION 4. WHEELS WITH
BRAKE 5. FILTER CLEANING LEVER 6. BAG HOLDER 7. COLLECTION BAG 8. STRAP LOCKS
BAG 9. ACCESS TO THE PRIMARY FILTER 10. ACCESS TO THE SECONDARY FILTER
11. MOUNTING OF PARTS
8.2 AT EVERY 50 HOURS OF OPERATION
· Check the condition of the primary filter: it must not have tears, holes or
other damage: in this case replace it (see 14.)
· Check that the technical data plate is legible and not damaged in any way:
contact the manufacturer for a replacement if necessary
9. PRODUCT DISPOSAL
Dispose of the machine and any accessories according to the legislation of the
state/country. To avoid affecting the environment or your health or the health
of others it is recommended to separate the machine from other
waste, and if necessary properly recycle it.
Connect one end of the flexible hose to the desired accessory and the other with the camlock mounted on the filter chamber. (See the accessories sheet)
4
12. USING THE VACUUM CLEANER
Before switching ON the vacuum be sure the container is empty
14. FILTER CLEANING DEVICE AND SUCTION MODE
To make cleaning effective the vacuum cleaner must be in operation
MANUAL FILTER CLEANING
Close the suction nozzle (A) and act on the lever (B) to clean the filter,
with a fast movement. If necessary, repeat the operation.
1
1
I
I
B
0
0
A
I – Motor switch ON O – Switch OFF
13. FILTER REPLACEMENT
PRIMARY FILTER REPLACEMENT
1. Disconnect and lift the head. (A)
2. Remove the filter (B)
3. Replace the filter with a proper one for
A
the vacuum cleaner in use
4. Insert the new filter
5. Hang up the head (A)
B
C
SECONDARY FILTER REPLACEMENT
D
1. Remove the rubber sleeve (C)
E 2. If necessary, close the filter with a cap (D)
3. Remove the three screws (E)
4. Remove the filter (F)
F
5. Replace the filter with a proper one for the
vacuum cleaner in use
6. Insert the new filter (F)
7. Fix the filter on the chamber with the 3 screws
8. Connect the sleeve
15. TROUBLESHOOTING
You can thus solve any problem that may occur.
Motors do not start. u No electrical voltage. u Check cables, plugs and
socket.
Suction capacity decreases slowly. u Filter, nozzle, suction hose or suction
pipe may be blocked.
u Check, clean accessories. Clean filter. Dust comes out during the vacuuming.
u Filter has not been fastened correctly or is defective. u Check to see if
filter is sitting properly; replace if required.
5
16. COLLECTION BAG USE
The dust and the particles are collected in a bag placed in the container
under the hopper.
The Infinity Bag system consists in a plastic tubular from which are obtained
20/30 bags of different weights and dimensions. Once finished or damaged, the
tubular must be replaced by a new refill. The operations below described must
be carried out when machine is turned off.
1 – Close the bag with two distanced bands.
2 – Cut the strip between the two bands.
17. BAG REPLACEMENT
3 – Pull the Infinity Bag end to make a new bag.
1- Remove the belt.
2- Remove the Infinity Bag container and any
waste.
3- Insert the new Infinity Bag 4- Cut and remove the Infinity with the inner
part facing Bag closing bands.
upwards.
5- Keep the inner part of the bag outside the container and pull it slightly.
6- Pull the outer part of the bag to create 7- Insert the container with the Infinity
the new one.
Bag, using the pins as reference.
8- Bring the inside of the bag up to the height of the belt positioning. Close the bag around the chamber with the belt.
9- Pull the bag and place at the edge the band to create a new one. If
necessary use two bands.
6
18. ELECTRIC DIAGRAM
7
19. PARTS BREAKDOWN
8
19. PARTS BREAKDOWN
No.
1
2 3
4 6 7
8 9
10 11
12 13
14 15
16 17
18 19
20 21 22 23 24 25 26 27 28 29 30 31
32 33
34 35
36 37
38 39
40 42 43 44 45 46 47 48 49 50 51
Part No. SVX-HOPPER-2M SVX-PREFILTER-2M SVX-FRAME-2M SVX-INLET
SVX-INFINITY-CONT-QB SVX-BOTTOMCOVER-2M SVX-DSR-FLAP-DISK
SVX-TOPFLAPPER SVX-TOPCOVER-2M SVX-MOTORHOUSING-2M SVX-MOTORHOUSING-COVER-2M
SVX-RFS-INFINITY
SVX-FLAP-M
SVX-TSTRAP SVX-BASEFRAME-2M SVX-AXLE SVX-AIRSEPARATOR-2M SVX-INLET-GASKET
SVX-KNOB
SVX-HOOK-SMALL
SVX-CASTER-M
SVX-RRING-A
SVX-TIRE SVX-M5X86 SVX-MOTOR-110V SVX-GASKET SVX-CABLEGLAND-PG16 SVX-
FILTERCHAMBER
SVX-M-HEPA
SVX-SWITCH-ON/OFF SVX-FLATGASKET2-M SVX-LOCKINGRING2-M SVX-HOSEELBOW-M
SVX-CUFF-TOPCOVER
SVX-HOSE-TOPCOVER SVX-CABLE-3GX6 SVX-CABLESTOPPER I-1376013 SVX-CAP-30X30 SVX-
FLAPGASKET
SVX-BLKHANDLE-M SVX-M5X40 SVX-FANPROTECTION-2M SVX-FOAM
SVX-MVH SVX-SW-135X109X4 SVX-VM-BY-PASS SVX-TERMINAL-110 SVX-TERMINALSUPPORT
Description
Qty.
HOPPER FOR SVX2M
1
PRE FILTER – (FOR SVX2M ONLY, 1 PER UNIT)
1
FRAME FOR SVX2M
1
INLET
1
INFINITY BAG CONTAINER QUICK BLACK
1
BOTTOM COVER FOR SVX2M
1
DOUBLE SPRING RETURN FLAP DISK
1
TOP FLAP AND PLUNGER
1
TOP COVER FOR SVX2M
1
MOTOR HOUSING FOR SVX2M
1
COVER FOR MOTOR HOUSING SVX2M
1
RUBBER FOAM STRIP FOR INFINITY BAG
1
FLAPPER FOR MANUAL MODELS
1
TIGHTENING STRAP 1,5 MT
1
BASE FRAME FOR SVX2M
1
AXLE
1
AIR SEPARATOR FOR SVX2M
1
INLET GASKET
1
TAPERED KNOB FOR PLUNGER
1
SMALL HOOKS
3
FRONT CASTER (FOR SVX3M & SVX2M ONLY, 2 PER UNIT)
2
RETAINING RING
2
REAR WHEEL (ALL SVX MODELS)
2
SPACER M5X86
12
MOTOR
2
GASKET L
4
CABLE GLAND
1
SECONDARY FILTER CHAMBER
2
HEPA FILTERS (FOR SVX3M & SVX2M ONLY, 1 PER UNIT)
2
16 AMP SWITCH WITH CUFFS (1 FOR AUTOMATIC UNIT / 2 FOR SVX2M / 3 FOR SVX3M) 2
FLAT GASKET FOR MANUAL MODELS
2
LOCKING RING FOR MANUAL MODELS
2
TOP COVER HOSE ELBOW FOR MANUAL MODELS
2
SOFT CUFF FOR TOP COVER 1.5″ MANUAL MODELS
4
1.5″X3′ TOP COVER HOSE
2
CABLE
10
CABLE STOPPER ALL MODELS
1
DIAMAPRO INFINITY BAG
1
CAP 30X30
2
FLAP GASKET FOR MANUAL MODELS
1
BLACK HANDLE FOR MANUAL MODELS
1
M5X40
6
COOLING FAN PROTECTOR FOR SVX2M
2
ADHESIVE FOAM FOR SVX2M
1
MOTOR VALVE HOLDER
2
VAVLE HOLDER SPONGE WASHER 135X109X4
2
VALVE MOTOR BY-PASS
2
RED TERMINAL BLOCK SCREW
1
TERMINIAL SUPPORT
1
9
20. ACCESSORIES
No. Part No.
Description
Qty.
1 SVX-WAND-2
STEEL WAND FOR FLOOR TOOL
1
2 SVX-FLOORTOOL-2
WET/DRY PLASTIC FLOOR TOOL
1
3 SVX-BLACKHOSE-CUFF
CUFFS FOR 2″ BLACK HOSE
2
4 SVX-HOSE-STANDARD-2-NC 2″ STANDARD BLACK HOSE
1
5 SVX-SQUEEGEE-BLADES
BLADE SET FOR FLOOR TOOL 15-1/2 X 17-1/4
1
10
DiamaPro® Systems
3343 Peachtree Road NE Suite 145 #24 Atlanta, GA 30326
470-977-2323
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>