SPACE TELEVISION SR-CCTVCAB CCTV Security Cabinet User Manual

SPACE TELEVISION SR-CCTVCAB CCTV Security Cabinet

Specifications

• Enclosure Type: CCTV Security Cabinet
• Enclosure Use: Secure NVR Storage & Use
• Equipment Capacity: Up to 2RU (240 – 480mm Wide, 465mm Max Depth)
• Load Capacity: 30Kg
• Monitor Capacity: Up to 24 Monitors (50/75/100mm VESA Mount)
• Materials: Cold Rolled Steel with White Hammertone Surface
• Security: Dual Cabinet Locks
• Cable Entry: 50mm Knockouts with Protective Grommets
• Power: Supports 19 Standard Rack Mount PDUs (PDU not included)
• Dimensions: 580mm x 185mm x 635mm (W x D x H)

Product Usage Instructions

Cabinet Installation

1. Locate the PDU (not included in packaging) for power distribution.
2. Identify tear-drop mounting holes for securing the cabinet.

Equipment Installation

1. Remove the knock-out for cable installation.
2. Install equipment securely within the cabinet.

Monitor Installation
Mount the monitor correctly using metal supports fixed to the rear of the monitor.

NVR/DVR Installation

1. Slide the recorder from the back or completely remove slider supports for larger recorders.
2. Place the recorder between the two side supports ensuring proper alignment.

FAQ

• Q: Can I install more than one NVR/DVR in the cabinet?
  A: The cabinet can accommodate multiple NVRs/DVRs depending on their size and configuration. Ensure proper spacing and ventilation.

• Q: Are additional cable entry points available?
  A: The cabinet features 50mm knockouts with protective grommets for cable entry. Additional openings can be made if needed.

• Q: What is the maximum weight capacity for monitors?
  A: The cabinet can support up to 24 monitors with VESA mounts, ensuring a total weight not exceeding 30kg.

SR-CCTVCAB
CCTV Security Cabinet
User Manual

SR-CCTVCAB CCTV Security Cabinet
User Manual

CONGRATULATIONS:

Dear customer.
Congratulations and thank you for choosing one of our awesome SpaceTV Security Cabinets.
We are sure you will find it convenient and easy to use. Before you use your SpaceTV Security Cabinet, we recommend that you read through the relevant sections of this manual, which provides a description of your SpaceTV Security Cabinet, it’s installation, function and use.
To avoid any risks that are always present with any type of equipment, it is important that the product/products are installed correctly and that you read the safety instructions carefully to avoid misuse and hazards.

We recommend that you keep this user manual for future reference and pass it on to any future owners.
After unpacking all the products contained in the carton, please check they are not damaged. If in doubt, do not use and contact your place of purchase.

No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission.
Space Television reserves the right to change the specifications of the hardware and software described in these manuals at any time. Space Television cannot be held liable for any damages resulting from the use of this product. Specifications are subject to change without notice.
© Space Television – 78 Republic Road, Ferndale, Randburg, 2125
PO Box 9317, Johannesburg 2000
T 0861 40 41 42
email sales@spacetv.co.za
www.spacetv.co.za

z The SpaceTV Security Cabinet is a wall-mount cabinet that offers a secure and professional storage solution for your security installations. The SpaceTV Security Cabinet is finished in a white Hammertone Powder Coated surface which is aesthetically neutral, durable and resistant to finger prints , scratches and marks. The SpaceTV Security Cabinet is designed to be mounted in areas with limited space. Consideration should be taken in relation to adequate airflow for the electronic equipment enclosed. The internal dimensions of the SpaceTV Security Cabinet allows for up to 2U equipment and monitor up to 24” with VESA mounting 50 / 75 / 100mm. It can house up to 4HDD bay NVRs and DVRs. The unique mounting method for the PDU allows for any standard 19” rack mountable unit to be installed in place of the existing 5 outlet PDU. The PDU is an optional accessory and is not included.

Product Features

• Mounting template for easy accurate installation included
• Raised tear drop mounting holes on the back plate at 440mm spacing to fit stud wall with 450mm centre stud spacing
• Complete with 2 USB cooling fans. “Y” Cable supplied for fans to connect to USB power source
• Fit up to 24” monitor with 50/75/100 VESA mounts (monitor must have downwards facing HDMI and Power inputs)
• Cabinet designed to take any standard 19” rack PDU, should more power outlets be required
• Capacity up to 2U mounted equipment 240-480mm width and 465mm depth
• Round 50mm knockouts on all cabinet sides with INCLUDED protective cable grommet
• Strategically positioned knockouts minimising tampering, adding to the security of the cabinet
• Extra ventilation on all sides compared to competitorsto help prevent overheating of equipment
• Accessories include: cable mounts, captive nuts, screws and monitor brackets
• Dimensions 480 x 635 x 185mm, compact design
• 2 cabinet locks for extra security
• Cold Rolled Steel construction with unique white Hammertone surface
• Packaging: high density foam in all corners to protect from shipping damage
• 30kg load bearing capacity

SECURITY SYSTEM WARNING:

• Note that there are some parts of the SpaceTV Security Cabinet you should not touch including your security system wiring. When you are working on equipment contained inside your SpaceTV Security Cabinet, take care not to touch or disconnect any of the security wiring. It also uses power, so make sure to turn the power back on if you have turned it off.
•  Once you have finished working on the SpaceTV Security Cabinet, firmly close and lock the lid.

SAFETY WARNINGS:

• Wiring work for telecommunications requires relevant knowledge and experience.
• A qualified electrician should only carry out work on power supplies and outlets. Work by unqualified users may cause electric shock, fire, injury or death.
• Do NOT work on the SpaceTV Security Cabinet, it’s contents, or wiring in the event of an electrical storm or lightning.
• Do NOT clean the contents of the SpaceTV Security Cabinet with any liquid or wet cloth. Water penetration into the unit may cause short-circuit, electric shock and fire.
• Do NOT handle any equipment with wet hands as it may cause electric shock.
• No user serviceable parts, in the event of product failure, please contact your installer for assistance. Do NOT attempt repairs.
• Do NOT attempt to modify any of the components or wiring inside your SpaceTV Security Cabinet except as instructed in this manual.
• If any power cables are broken or exposed, switch off power and replace.
• In case of smoke or burning smell from equipment (e.g. damaged by lightning) immediately discontinue use and contact your installer.
• Dropping or exposing products to electric shock may cause damage and malfunction.
• Only use approved cable, tools and components in your SpaceTV Security Cabinet.
• Do NOT install your SpaceTV Security Cabinet near wet or damp areas (e.g. laundry, kitchen, bathroom, outside, near and air conditioner or heater).
• When removing a cable from a socket, do NOT pull using the lead, hold the plug body firmly using dry hands then pull straight out.

GENERAL:
The SpaceTV Security Cabinet contains components that may need configuration once installed. We hope that your installation will provide you with many years of maintenance-free convenience and enjoyment.
The majority of issues that may appear can be solved by:

1. ADEQUATE AIRFLOW.
   • It is recommended that the SpaceTV Security Cabinet have clear space around them to allow for free flowing air.
   •  Do not allow clothing to block any of the air vent if located in a wardrobe.
   • It is important that fresh cool air be always available for the cooling fans to work effectively.
2. CHECKING THAT YOU ARE USING THE RIGHT CABLE.
   • Perhaps the cable you have connected is for another device.
   • Is the data cable connected to the router and/or switch?
   • Is the correct HDMI/VgA port connected?
3. CHECKING THAT ALL REQUIRED DEVICES ARE TURNED ON.
   • The power/stand-by switch on the equipment is switched on.
   • In rare circumstances the power to the SpaceTV Security Cabinet may be switched off. For example, a circuit breaker may have tripped or someone turned it off and forgot to turn it back on. This will also turn off the equipment in the SpaceTV Security Cabinet.
   • Check that any power sockets that supply power to your SpaceTV Security Cabinet are switched on and function normally.
4. CHECKING THAT YOU HAVE CONFIGURED YOUR DEVICE CORRECTLY.
   • For example, a NVR/DVR will not work out-of-the-box. You will first need to configure it after you plug it into an appropriate wall outlet. See your device’s manual for more information and instructions.

INSTALLATION INSTRUCTIONS – CABINET:

• Open the carton and carefully remove the contents.
• Open the Security Cabinet and remove the bag of accessories.
• Locate the mounting template.
• Once you have decided on your desired location, place the mounting template on the wall and mark the 4 hole locations.
• If you are mounting to a plasterboard wall with 450mm stud centers, the cabinet mounting holes will allow for securing to the studs on both sides. This is the most secure mounting method for a cavity wall of this construction.
• If you can not locate the wall studs it is recommended to use quality Hollow Wall Anchors to affix the security cabinet to the wall.
• If you are mounting to a brick or rendered wall, it is recommended that the use of the appropriate wall fixings for this type of structure be utilized.
• Note: The Security Cabinet is only as secure as the mounting method allows, please take care in choosing your cabinet location and method of mounting.
• With the 4 mounting screws securely placed in the correct location, you can hang the Security Cabinet as required.

INSTALLATION INSTRUCTIONS – EQUIPMENT:

• Locate the Knock-outs on the sides of the Security Cabinet.
• Choose the correct Knock-out depending on your cable entry requirements.
• Remove the Knock-out by pushing inwards, the Knock-out is held in place at four points. By pushing back and forth these points will break away allowing the Knock-out to be completely removed.
• Install the plastic grommet provided to protect the cables from any sharp edges.
• Install the cables and equipment.

INSTALLATION INSTRUCTIONS – MONITOR:

• From the accessories pack, remove the two metal supports and mounting screws, securely fix to the VESA mounting holes on the back of the monitor.
• Connect all leads to the monitor.
• Hook monitor onto one of two mounting supports already installed on cabinet.

INSTALLATION INSTRUCTIONS – NVR/DVR:

• Carefully measure the width of the recorder to be installed

• Slightly loosen the bolts that secure the side supports

• Slide the side supports out to match the width of the recorder. (allow an extra 2mm on each side for a bit of spacing)

• Tighten the bolts to completely secure the side supports

• Loosen nuts on slider supports. (You may need to completely detach then re-attach the two slider supports so the angled stopper can be re-positioned to fit snug behind the recorder)

• Carefully place the recorder in between the side supports. This can be done two different ways:

  1. Slide the recorder from the back. (you may not be able to do it this way on bigger recorders)
  2.  Or, completely remove the slider supports, place the recorder in between the two side supports, then place the two slider supports onto the recorder so the angled parts fit snug to the rear
     of the NVR to prevent sliding back. Tighten with supplied nuts and bolts. (Note that nuts face outwards and the curved head of the bolts face inward to prevent scratching)

• Fit cabled to back of NVR, ensuring they fit through one of the cutout sections at the base of the door

• Carefully close the door and make sure you have enough clearance away from the monitor to prevent damage

• Use the cage nuts provided to install a 19” rack mountable NVR if desired

ACCESSORIES

• 2 x Monitor Brackets
• 4 x M4 Screws & Washers
• 2 x Plastic grommet
• 1 x USB “Y” lead
• 2 x USB Cooling Fans
• 4 x Cage Nuts and Screws
• 4 x Adhesive Cable Tie Bases
• 1 x Mounting Template

TECHNICAL SPECIFICATIONS

Helpline: 0861 40 41 42
WWW.SPACETV.CO.ZA

References

• Home - Space Television

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>