LASGOO ‎LG-CROSS Green Cross Laser Line User Manual

: September 17, 2024
: LASGOO

Table of Contents

LASGOO ‎LG-CROSS Green Cross Laser Line
Product Overview
Safety & Notes
Intended Use
Initial Operation
Operation Modes
Specification
Maintenance
Warranty
FAQs
Video-LASGOO ‎LG-CROSS Green Cross Laser Line
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LASGOO ‎LG-CROSS Green Cross Laser Line

Product Overview

Key Board
Windows
Laser Source
Pendulum Lock
1/4′ Screw Hole
Battery Compartment

Safety & Notes

WARNING
Read the Safety Instructions and User Manual thoroughly before using this product. All users must fully understand and adhere to these instructions.

CAUTION
While the product is in operation, be careful not to expose your eyes to the emitting laser beam. Exposure to a laser beam for an extended time may be hazardous to your eyes.

CAUTION
Glasses may be supplied in some of the laser tool kits. These are NOT certified safety glasses. These glasses are ONLY used to enhance beam visibility in brighter environments or at greater distances from the laser source.

WARNING
The following label/print samples are placed on the product to inform you of the laser class for your convenience and safety.

Do not stare directly into the beam, view directly with optical instruments, or set up the laser at eye level.
Do not disassemble the laser tool. There are no user-serviceable parts inside.
Do not modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
Do not operate the laser around children or allow children to operate the laser; this may result in serious eye injury.
An exposure to a Class 2 laser beam is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will generally provide adequate protection.

Intended Use

The measuring tool is intended for determining and checking horizontal and vertical lines. The measuring device is suitable exclusively for operation in enclosed working sites.

Initial Operation

Protect the measuring tool against moisture and direct sunlight.
Do not subject the measuring tool to extreme temperature or temperature variations. In case of significant temperature variations, allow the measuring tool to adjust to ambient temperature before putting it into operation.
Avoid heavy impact to or falling of the measuring tool.
Switch off the measuring tool during transportation.

Operation Modes

Note: Please keep the Lock switch at the “OFF” position while moving the laser level or storing it.

Self-Leveling Mode

Switch the pendulum lock to the “ON” position, and the laser level enters self-leveling mode, and the laser lights up.
The laser will self-level within +4*, and the keyboard will glow green at this time. If the laser is out of level, the laser will blink, and the keyboard will light yellow.

Manual Mode

When the lock switch is in the “OFF” position, press the key button to enter the manual mode, and the keyboard will glow red.
The laser will be locked in this mode, which meets your alignment needs from different angles.

Specification

Laser Class Class	Class II
Laser Wavelength	510-530nm
Leveling Accuracy	±l.5mm/5m
Leveling Compensation Range	40±10
Working Distance (Line)	30m/100ft
Operating Time	6 Hours
Power Source	2xAA
IP Rating	IP54
Operation Temperature Range	-10 t: -+50 t:
Storage Temperature Range	-20·c-+70C

Maintenance

Maintain and keep the measuring tool clean at all times.
Regularly clean the surfaces at the exit opening of the laser, and pay attention to any fluff or fibers.
Wipe off debris using a moist and soft cloth, do not use any cleaning agents or solvents.
Do not immerse the measuring tool in water or other fluids.
If the laser level is unusable, it should be repaired by an authorized after-sales service. Do not open the gauge by yourself.
In case of repairs, send the measuring tool packed in its protective packing.
Store the tool in its case when not in use. If storing for an extended time, remove batteries before storage to prevent possible damage.
Do not dispose of this product with household waste.
Always dispose of batteries per local code.
Please recycle in line with local provisions for collecting and disposing of electrical and electronic waste under the WEEE Directive.

Warranty

We are confident in our products and offer excellent and professional service to our customers. This statement is in addition to your effective rights and does not injure your statutory rights.
LASGOO will repair, without charge, any defects due to faulty materials or artistry three years from the date of purchase, provided that:

Proof of purchase is produced.
Unauthorized persons have not attempted service/repairs.
The product has been subject to fair wear and tear.
The product has not been misused.

Questions or Concerns?
Email: support@lasgootools.com

UK REP
EVATOST CONSULTING LTD Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR contact@evatmaster.com
EC REP
Liftmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Germany contact@evatmaster.com

FAQs

What is the LASGOO LG-CROSS Green Cross Laser Line?

The LASGOO LG-CROSS is a high-visibility laser level that projects bright green cross laser lines for precise leveling and alignment tasks.

How far can the LASGOO LG-CROSS project its laser lines?

The LASGOO LG-CROSS can project its laser lines up to 100 feet away, making it suitable for both indoor and outdoor applications.

What are the key features of the LASGOO LG-CROSS?

The LASGOO LG-CROSS features high visibility, multi-functionality for various tasks, self-leveling capabilities, and an easy-to-use design.

How does the self-leveling feature work in the LASGOO LG-CROSS?

The LASGOO LG-CROSS uses a fast stabilizing pendulum to level the laser line within a 4-degree range; if it exceeds this, the laser will flash.

What types of projects can the LASGOO LG-CROSS assist with?

The LASGOO LG-CROSS is ideal for flooring, tiling, ceiling installation, molding work, and other DIY decoration tasks.

What is the power source for the LASGOO LG-CROSS?

The LASGOO LG-CROSS is powered by 2 AA alkaline batteries, which are included with the purchase.

What should I do if the LASGOO LG-CROSS is not turning on?

If the LASGOO LG-CROSS is not turning on, check the batteries to ensure they are properly installed and charged.

How can I clean the LASGOO LG-CROSS?

To clean the LASGOO LG-CROSS, gently wipe the laser lens with a soft, lint- free cloth to maintain optimal visibility.

What are the dimensions of the LASGOO LG-CROSS?

The LASGOO LG-CROSS measures 2.95 x 2.56 x 2.95 inches, making it compact and easy to handle.

What is the maximum range of the LASGOO LG-CROSS?

The LASGOO LG-CROSS can project clear laser lines up to 100 feet indoors, providing ample range for most leveling tasks.

What type of battery does the LASGOO LG-CROSS use?

The LASGOO LG-CROSS operates on standard AA batteries, which are included with the purchase for immediate use.

How do you set up the LASGOO LG-CROSS?

To set up the LASGOO LG-CROSS, insert the batteries, turn on the device using the power button, and place it on a flat surface to allow the self-leveling feature to activate.