NOVA LIFE 32930-160-71 Interior Floor Lamp Instruction Manual
- September 18, 2024
- NOVA LIFE
Table of Contents
32930-160-71 Interior Floor Lamp
Nova Life Instructions Manual for Pole
Interior Floor Lamp
Art Nr. 32930-160-71
Package Contents (parts are not to scale):
- A – Lighting fixture with dimmer on the wire (Quantity: 1)
- B – LED driver plug (Quantity: 1)
- C – Base (Quantity: 1)
- D – Allen key (Quantity: 1)
- E – Bottom pad (Quantity: 1)
- F – Screw (Quantity: 2)
Light Source
Max. LED 28W 1340 Lumen 3000K (Dimmable)
(Lamp guarantee: 3 years)
Care and Cleaning
Exterior Maintenance
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Pre-Installation
Planning the Installation
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required
- Knife
Installation
- Step 1: Insert the bottom pad (E) into the base (C).
- Step 2: Use the screws (F) to secure the base (C) to the lighting fixture (A) using the Allen key (D).
Operation
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
Specifications
Part | Description | Quantity |
---|---|---|
A | Lighting fixture with dimmer on the wire | 1 |
B | LED driver plug | 1 |
C | Base | 1 |
D | Allen key | 1 |
E | Bottom pad | 1 |
F | Screw | 2 |
FAQ
How do I clean the lamp?
Use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
What tools are required for installation?
A knife is required for installation.
What is the maximum wattage for the LED light source?
The maximum wattage for the LED light source is 28W.
How do I turn on the lamp?
Turn on power at the circuit breaker or fuse box and then turn the light switch on to activate the fixture.
What should I do before starting the installation?
Read all instructions before assembly and installation. Disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Assemble the product on a soft, non-abrasive surface such as carpet or cardboard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>