Maitu BOX Boxing Machine Installation Guide
- September 16, 2024
- Maitu
Table of Contents
Maitu BOX Boxing Machine
Boxing Machine Installation Guide
- Choose a smooth and flat wall (make sure the wall is clean, dry, no dust, ), attach the velcro to the wall, the top of the sticker is at eye level, no more than the user’s head, and hold it for five minutes (pay attention to press it firmly with your hands).
- Attach the velvet surface on the back of the boxing machine to the velcro and press firmly on the body to make full contact.
- Connect the charging cable of the device, and the machine will automatically turn on and self-check after powering on.
Boxing machine disassembly guide
The middle light position of the 6 rake positions is the power indicator when it is idle.
The power level from low to high is: Red battery is low. Purple Medium to low battery. Blue Medium to high battery level. Green High battery.
Make sure the device is fully charged before not using it for a long time.
How to protect your hands
As following steps to wrap the back of the hand, and please not wrap too tight
to avoid hand discomfort.
Product specifications
The name and content of the hazardous substance
List of pack
Hardware features and introduction
- Power on : connect the USB interface of the machine to the adapter, press the middle button after powering on to automatically start the self-test, and the marquee and ring light will gradually light up and then go off during the self-test.
- Offline mode : After the machine self-check, if it is not connected to Bluetooth or APP, it will enter offline mode, and the built-in music of the boxing machine can be played through the control panel.
- Power off : Long press the power button to power off, and it will automatically standby if it is not operated for a long time.
Button description
- Power button: In the power-off state, press and hold for three seconds to power on, and in the power-on state, press and hold for three seconds to power off.
- + – Button: In default mode, tap the + button to increase the volume. Tap the – button to decrease the volume. Press and hold the + button for 3 seconds to enter the song speed mode. Short press + or – to switch gears, a total of 9 gears. Ist gear is the slowest and 9th gear is the fastest.
- < > button: In default mode, short press the < button to switch to the previous program. Short press the > button to switch to the next program. Press and hold the < button for three seconds to enter the free-hitting mode, you can play your favorite music by yourself, and hit the lights freely. Continue to press and hold the < button for three seconds to enter the local program loop mode, and after playing one piece of music, the next one will be played automatically. Press and hold the > button to play the built-in music and lights in the machine
- Reset button: Use a tool (such as a needle or card picker) to press the switch in the hole, short press to restore the device and power off, short press again to power on
APP download and connection
- Download by scanning the QR code or searching for MAITUBOX in the App Store, which currently supports IOS, ANDROID, TABLET, etc.
- Install and agree to the permissions required by the software in turn.
- Open the APP and register and log in under the guidance of the APP.
- Press and hold the power button of the boxing machine to power on, click the connection button on the APP workout page, and select MAITUBOX to connect.
- Select the song and click to start the workout (the new song will be automatically downloaded when clicked)
Notes
- If you can’t install and use it normally, please check whether the system version of your phone meets Android 7.0, IOS13.0 and above.
- In order to maintain the best user experience, it is recommended to continuously update to the latest version of the software.
- Some functions are based on network services, please make sure that the network is normal when using the software
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- – Reorient or relocate the receiving antenna.
- — Increase the separation between the equipment and receiver.
- — Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- — Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.