SONORA TSB-11 Digital Hotel Safe User Manual

: September 13, 2024
: SONORA

Table of Contents

IMPORTANT INFORMATION
SAFETY INSTRUCTIONS
PARTS IDENTIFICATION
FLOOR INSTALLATION
HOW TO USE
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONORA TSB-11 Digital Hotel Safe

IMPORTANT INFORMATION

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.

Read the operating instructions carefully before putting the product into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this product to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
CAUTION: This sign refers to possible hazards to the machine or other objects.
NOTE: This sign highlights tips and information.

SAFETY INSTRUCTIONS

Keep the device away from heat sources, direct sunlight and moisture (never immerse it in liquids).
Do not immerse the device in water or any other liquid.
To ensure the safety of your children, keep all packaging materials (plastic bags, boxes, polystyrene, etc.) away.
WARNING: Do not allow small children to play with the packaging materials, as there is a risk of suffocation!
If you do not intend to use the device for a long time, please remove the batteries before storing it to avoid any leakage of battery fluid.

PARTS IDENTIFICATION

Emergency key lock cover
Display
Illuminated keyboard
Safe opening recess

FLOOR INSTALLATION

Install the safe on the floor, or on another stable surface for maximum security.

Select an isolated, dry, and secure location for your safe. Make holes for the bolts on the floor according to where the holes are located inside the safe (there are holes at the bottom of the safe).
Place the bolts inside the holes.
Install the safe by aligning the holes in the safe with the holes you made and screw in the screws to secure the safe to the floor.

HOW TO USE

HOW TO SET NEW MASTER CODE

Open the door of the safe.
Press the “CLEAR” key twice and “PROG” will appear on the screen.
Enter “842627”, then press the “LOCK” key and “OLD” will appear on the screen.
Enter the previous master code (the default master code is “000000”), then press the “LOCK” key and “NEW” will appear on the screen.
Enter the desired code (6 digits) and press the “LOCK” button to confirm. The display will show “GOOD”. Saving the new master code will be complete.

HOW TO SET USER CODE

Open the door of the safe.
Enter the user code (from 3 to 6 digits).
Press the “LOCK” button. The display will show “CLOSED”. The saving of the new user code will be complete.

HOW TO OPEN THE SAFE

WITH USER CODE

Enter your saved code. In case of typing mistake, press the “CLEAR” button to delete the wrong digit you typed.
After you have entered the correct code, “OPENED” will appear on the screen and the safe door will open automatically.
NOTE: If you enter the wrong code 4 times, the safe will lock for 5 minutes.

WITH MASTER CODE

Press the “CLEAR” button twice. The display will show “SUPER”.
Enter your saved code. In case of typing mistake, press the “CLEAR” button to delete the wrong digit you typed.
After you have entered the correct code, “OPENED” will appear on the screen and the safe door will open automatically.

OPENING THE SAFE USING THE EMERGENCY KEYS

In case the master code is lost or forgotten, open the safe using the emergency keys.

Remove the emergency lock cover.
Insert the key into the emergency lock and turn it counterclockwise.
CAUTION: Never store emergency keys in or near the safe. Store the keys in a safe place.

MASTER CODE RESET TO FACTORY SETTINGS

Insert the key into the emergency lock and turn it counterclockwise to unlock. The display will show “OPENED”.
Press the “LOCK” button until “RESET” appears on the screen.
Factory reset is complete. The pre-set master code is “000000”.

HOW TO LOCK THE SAFE

Close the door of the safe.
Enter the user code.
Press “LOCK” button.

BATTERY INSTALLATION

Open the safe door.
Open the battery compartment located on the inside of the safe door.
Insert 4 AA batteries into the case with the correct polarity.
NOTE: If the batteries are removed for a long time, you must reset the user code and master code.

WARNING:

Do not use new batteries with used one.
If you do not use the safe for a long time, remove and store the batteries due to a potential risk of battery liquid leakage.

CLEANING

Never immerse the device in water or other liquids.
Wipe the casing and keyboard of the device with a soft cloth.

STORAGE

Open the safe.
Open the battery compartment and remove the batteries.
Store the safe and emergency keys.

DISPOSAL OF APPLIANCE AND ACCESSORIES
This symbol appearing on the product, its accessories or accompanying manuals indicates that the product and its electronic accessories should not be disposed of with other household trash.
In order to avoid possible harmful effects on the environment or health due to uncontrolled waste disposal, please separate these products from other types of waste and recycle them. Household users should contact either the store where they purchased this product or their local services for details of where and how they can return these products for environmentally safe recycling.

DISPOSAL OF BATTERIES
This marking on the battery, manual or packaging indicates that the batteries of this product should not be disposed of with other household waste at the end of their life cycle.

SAFE PARAMETERS AND FUNCTION SETTINGS {IT IS RECOMMENDED THAT THE FOLLOWING ADJUSTMENTS BE DONE BY A QUALIFIED TECHNICIAN ONLY)

SET DATE AND TIME

When the safe is unlocked, type: “CLEAR” + “CLEAR” + “055261” + “LOCK”. The display will show “DATE”.

The following digits appear on the screen: 1 2 3 4 5 6
a. “l” and “21′ ~ Year
b. “3” and “4” ➔ Month
c. “5” and “6” ➔ Day
Set the year, month and day, then press the”#” key to confirm the setting.
Then the following digits appear again: 1 2 3 4 5 6
a. “1” and “2” ➔ Time
b. “3” and “4” ➔Minutes
c. “5” and “6” ➔ Seconds
Set the hour, minutes and seconds, then press the “LOCK” key to confirm the setting.
The display will show “GOOD”. Settings completed successfully.

FUNCTION SETTING

Type “CLEAR” + “CLEAR” + “711469” + “LOCK” when the safe is unlocked. “CODE” will appear on the screen.
The parameters are divided into two screens, with 6 digits on each screen {Factory settings are: 1 1 1 1 2 1 4 7 0 5 4 0). The content that first appears on the screen is: 1 2 3 4 5 6 (the numbers represent only the positions, each of the digits represents a function).
a. “l” ➔Show code
i. Press “0” to hide the code when typing
ii. Press “l” to display the code as you type. Press the “CLEAR” key before entering your code to hide the display of digits when typing when the safe is locked.
b. “2” ➔Display code when the safe is locked
i. Press “0” to not display the code when typing when the safe is locked
ii. Press “l” to display the code when typing when the safe is locked
c. “3” ➔ Show on screen
i. Press “0” and then press the “CLEAR” key to turn off the screen while entering the code
ii. Press “1” and then press the “CLEAR” key to display the digits on the screen while entering the code
d. “4” ➔ Opening history
i. Press “1” to display the history of the last 100 openings
e. “5” ➔ Safe opening options
i. Press “1”: to lock the safe for the first time, you will enter your code and then press the “LOCK” button. The next time you want to lock the safe, you don’t need to enter the code again. The safe will be locked by closing the door and pressing only the “LOCK” button. (recommended mode for families)
ii. Press “2”: every time you unlock or lock the safe, you need to enter your code and press the “LOCK” button (recommended function for hotels)
f. “6” ➔Parameter settings: Press “1” + “CLEAR” and the parameters 1 2 3 4 5 6 will appear on the screen
i. ➔ Setting the allowed number of attempts to enter a password before auto- locking due to a wrong password. The selection range is from 1 to 9 attempts.
ii. “2” ➔ Set number of code digits
Press “3” for 3 digit code
Press “4” for 4 digit code
Press “5” for 5 digit code
Press “6” for 6 digit code
Press “7” for a 3-6 digit code with automatic recognition from the safe
iii. “3” and “4” ➔Setting the lock time of the safe after being locked due to entering the wrong code. The lock time selection range is 00-99 minutes
iv. “5” ➔Master Code
Press “0” to disable the use of the Master code
Press “4” to activate the use of the Master code
v. “6” ➔Confirm settings. Press “0” + “LOCK” to confirm and the display will show “GOOD”