Super Micro Computer H12SSL-NT Motherboard User Guide
- September 13, 2024
- Super Micro Computer
Table of Contents
Super Micro Computer H12SSL-NT Motherboard
Key Features
-
Single AMD EPYC™ 7003/7002 Series Processor
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D VCache TM Technology requires BIOS version 2.3 or newer) -
2T B Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs
-
Expansion slots:
- 5 PCl-E 4.0 x16
- 2 PCl-E 4.0 x8
- M.2 Interface: 2 PCl-E 4.0 x4
- M.2 Form Factor: 2280, 22110
- M.2 Key: M-key
-
2 M.2,
- 2 SlimSAS x8 (each: 8 SATA3 or 2 NVMe)
-
Dual 1 0GBase-T LAN via Broadcom BCM57 416
-
ASPEED AST2500 BMC graphics
-
Up to 6 USB 3.0 ports
(4 rear + 2 via header) -
7 PWM 4-pin Fans with tachometer status monitoring
Note : Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.
Links & Resources
- Tested Memory List
- Tested HDD List
- Tested M.2 List (en/support/resources/m2ssd?
- ProductID=87233&ProductName=H12SSL-NT)
- Tested AOC List
- Motherboard Manual
- Update Your BIOS
- IPMI Firmware
- Download the Latest Drivers and Utilities
- Download Driver CD
- OS Compatibility
(Aplus/support/resources/OS/OS Comp H12 EPYC7002 7003-UP-1.cfm)
Specifications
Product SKUs
- MBD-Hl2SSL-NT
- Hl2SSL-NT
- MBD-Hl2SSL-NT-O
- Hl2SSL-NT (Retail Pack)
Physical Stats
- Form Factor
- ATX
- Dimensions 12″ x 9.6″ (30.5cm x 24.4cm)
Processor/Chipset
-
CPU
Single AMD EPYC™ 7003/7002 Series Processor (The tatest AMD EPYC™ 7003 Series Processor with AMD 3D VCache TM Technology requires BIOS version 2.3 or newer) -
Socket SP3
Cores
- Up to 64 Cores
Chipset
- System on Chip
System Memory
- Memory Capacity
- 8 DIMM slots
- Supports up to 2TB Registered ECC DDR4 3200M Hz SDRAM
- 8-channel memory bus
Memory Type
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
- DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
1.2V
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
SATA3 (6 Gbps)
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
Network Controllers
- Dual l0GBase-T LAN via Broadcom BCM57416
- 1 Realtek RTL8211F PHY (dedicated IPMI)
VGA
- ASPEED AST2500 BMC
Input/ Output
SATA/NVMe Hybrid
- 2 SlimSAS x8 (each: 8 SATA3 or 2 NVMe)
LAN
- Dual lOGBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 6 USB 3.0 ports
- (4 rear + 2 via header)
VGA
- 1 VGA port
Others
- 1 COM port (rear)
- 1 TPM 2.0 header
Expansion Slots
Chassis ( Optimized for H12SSL-NT)
- lU
- SC813M FTQC-350CB2 (LproductsfchassisL!U/813/SC813MFTQC-350CB2)
- SC813M FTQC-R407CB (Lproducts/chassisf1U/813/SC813MFTQC-R407CB)
- 2U
- SC213BAC8-R1K23LPB.(LproductsLchassisL2UL213/SC213BAC8-RlK23LPB).
- SC216BE1C4-R1K23LPB.(Lproducts/chassisf2Uf216/SC216BE1C4-R1K23LPB).
- SC825 M BTQC-R802LP B.(Lproducts/chassisf2U/825/SC825MBTQC-R802LPB).
- SC825TQC-R802LPB.(Lproducts/chassisf2UL825/SC825TQC-R802LPB).
- SC826BE1C4-R1K23LPB.(Lproducts/chassisf2U/826/SC826BE1C4-R1K23LPB).
- SCLA26AC12-R920LP1.(Lproductsfchassisf2U/LA26/SCLA26AC12-R920LP1}.
- 3U
- SC835TQC-R802 B.(Lproducts/chassisf3U/835/SC835TQC-R802B).
- SC836BE1C-R1K23B(Lproducts/chassisL3U/836/SC836BE1C-RlK23B)
Mid-Tower
- SC732i-903B
Tower/4U
- SC745BAC-R1K23B (Lprod ucts/chassisL 4U/7 45/SC7 45BAC-R1K23B)
- SC846BE1C-R1K23B (Lproducts/chassis/4U/846/SC846BE1C-R1K23B)
System BIOS
BIOS Type
- AMI 256Mb SPI Flash EEPROM
BIOS Features
- Plug and Play (PnP}
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SM BIOS 3.1.1
Management
- Software
- Supere Doctor 5 (Lproducts/nfo/SMS SDS.cfm).
- Watch Dog
- NMI
- SUM (Lproducts/nfoLSMS SUM.cfm).
- IPMI 2.0 (Lproducts/nfoLSMS IPMl.cfm)., KVM with dedicated LAN
- Power Configurations
- ACPI Power Management
- Power-an mode control for AC power loss recovery
- PCI-Express
- S PCI-E 4.0 x16
- 2 PCI-E 4.0 x8
- M.2
- Interface: 2 PCI-E 4.0 x4
- Form factor: 2280, 22110
- Key: M-key
- CPU
- Monitors CPU Core Voltages, +3.3V, +SV, +SV standby, +3.3V standby
- CPU switching voltage regulator
- Supports system management utility
- VBAT
- FAN
- Up to 7-fan status tachometer monitoring
- Up to 7 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated {PWM) fan connectors
- Temperature
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 7x Fan connectors
- l2C Temperature Sensing Logic
- LED
- CPU/ System Overheat LED
- Other Features
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
Operating Environment/ Compliance
Environmental Specifications
- Operating Temperature: 10° c to 3s0 c (so° F to 9S° F)
- Non-operating Temperature: -40°C to 10° c (-40° F to 1ss° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: So/o to 9S% (non-condensing)