CARSON LL-20 LumiLoupe 10x Stand Magnifier Instructions
- September 13, 2024
- Carson
Table of Contents
CARSON LL-20 LumiLoupe 10x Stand Magnifier
INTRODUCTION
10x Stand Magnifier with Snap-on Reticle
- Congratulations on selecting your new LumiLoupe™!
- In order to achieve optimum performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION
| Magnification: | 10x |
|---|---|
| Weight: | 0.09 lbs |
| Dimensions: | 2.1″ x 2.0″ x 1.9″ |
FOCUSING LOUPE
- Place loupe over a subject you are viewing.
- Your eye(s) should be reasonably close to the loupe.
- It’s best to start with a loupe flat against a table. Depending on your vision, raise as needed to focus.
REMOVING RETICLE
- With the loupe upside down, locate the two holes on either side of the reticle as shown in Fig. 1.
- Using a tool such as a pen, insert it into one of the holes to lift the reticle out from the compartment.
- To reattach, push back into place.
CLEANING
Clean using a microfiber lens cloth. Do not use any abrasives, chemical cleaners, or solvents.
Customer Service
- If you experience any difficulties, please contact us and we will be happy to help you.
- info@carson.com
- uksupport@carson.com
- eusupport@carson.com
- For warranty information, visit www.carson.com/warranty
- www.carson.com
- Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel:631-963-5000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>