Performance Tools W87022 GM Power Steering Pulley Remover Instructions
- September 13, 2024
- Performance Tools
Table of Contents
GM POWER STEERING PULLEY REMOVER / INSTALLER
Instructions for W87022 GM Power Steering Pulley Puller/Installer
W87022 GM Power Steering Pulley Remover
To remove pulley:
- Run Puller Flange down to end of center screw.
- Insert tip of Center Screw into pulley shaft.
- Put best fitting side of Jaw Halves over Pulley Flange and Puller Flange.
- Place Retaining Sleeve over Jaw Halves.
- Turn Center Screw to remove pulley.
To install pulley:
- Place Pulley over Center Screw.
- Turn Center Screw into threads in Pulley Shaft.
- Turn Drive Nut to press Pulley onto Shaft.
P.O. Box 88259
• Tukwila, WA 98138
• 1-800-497-0552
• Made in China
• © Copyright 2023
• www.wilmarcorp.com
Documents / Resources
|
Performance Tools W87022 GM Power Steering Pulley
Remover
[pdf] Instructions
W87022 GM Power Steering Pulley Remover, W87022, GM Power Steering Pulley
Remover, Power Steering Pulley Remover, Steering Pulley Remover, Pulley
Remover, Remover
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>